Daewoo DF-8100 - Manuals

INTRODUCTION 7 6 Overview Disc-related Terms Title (DVD only) The main film, accompanying feature content, or music album. Each title is assigned a title reference numberenabling you to locate it easily. Chapter (DVD only) Sections of a movie or a musical piece that are smaller than titles. A title ...

INTRODUCTION 9 8 Overview Handling the Unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack theunit as it was originally packaged at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may ...

INTRODUCTION 11 10 Identification of Controls Identification of Controls ! STANDBY/ON Turns the DVD Recorder+VCR on and off.Lock/Unlock the front panel and Remote controlby pressing and holding it over 5 seconds. @ Cassette Compartment (VCR deck) Insert a video cassette here. # EJECT (VCR) Ejects th...

INTRODUCTION 13 12 Identification of Controls Remote Control Turns the DVD Recorder+VCR on and off. - Opens and closes the disc tray in DVD mode. - Ejects the tape in the VCR deck in VCR mode. Switches the view on your TV to the DVD Recorder+VCR tuner. Selects DVD mode. Selects VCR mode. Switches be...

INTRODUCTION 15 14 ! AC Power Cord Plug into a power outlet. @ AUDIO OUT (L, R) Connect to a TV or other equipment with audioinputs. # COMPONENT/PROGRESSIVE VIDEO OUT (Y Pb Pr) Connect to a TV with Component Video (Y Pb Pr)inputs. $ Scart socket 2 Connection of an additional device (satellitereceive...

CONNECTIONS 17 16 Choose one of the following TV connections, depending on the capabilities of your equipment. RF Connection Connect the RF OUT (TO TV) jack on the DVDRecorder+VCR to the antenna in jack on your TV usingthe supplied 75-ohm RF cable (R). Scart Connection1 Plug a scart cable into the s...

CONNECTIONS 19 18 Connections To receive audio/video signals from other equipment, connectthe AVF jacks on the DVD Recorder+VCR to the audio/video outjacks on your external component, using optional audio/videocables. Connecting Optional Equipment Using the front panel DV IN jack, it is possible to ...

SETUP 21 20 Initial Installation 6 Select the desired disc playback subtitle language using [ … / † ]. Press [ENTER] to confirm. 7 The DVD Recorder+VCR detects channels automatically and stores themin memory. 8 After finishing Auto Channel Search, set the clock. 9 Use [ œ / √ ] to move left/right an...

SETUP 23 Set Clock1 Follow steps 1-2 as shown under ‘Manual Set’. 2 Use [ … / † ] to select ‘Set Clock‘. 3 Press [ENTER]. The ‘Set Clock’ menu appears. 4 Enter the date and time. œ / √ (left/right): Moves the cursor to the previous or next column. … / † (up/down): Changes the setting at the current ...

SETUP 25 24 Initial Setup VCR Record Quality You can set the default VCR recording quality to SP (Standard Play) or LP(Long Play). SP is higher quality, but LP provides 2 times the recordingtime; e.g., a 2 hour tape will record for 4 hours in LP mode.Follow the same procedure as the ‘DVD Record Qual...

SETUP 27 26 Initial Setup TV Aspect Ratio1 Use [ … / † ] to select ‘TV Aspect‘ while the ‘Video‘ submenu is displayed. 2 Press [ENTER] or [ √ ] to go to the second level. 3 Use [ … / † ] to select the desired ‘TV Aspect’. 4 Press [ENTER] to confirm your selection. 5 Press [SETUP] to exit the menu. 4...

SETUP 29 28 Initial Setup Virtual Surround You can enjoy a simulated 3D effect from two speakers by setting VirtualSurround to On.Follow the same procedure as ‘Digital Output‘ to set the ‘VirtualSurround’ option. Audio Digital Output Off Dynamic Range Off Virtual Surround Off Instructions Enter-Conf...

SETUP 31 30 Initial Setup 8 Press [ENTER] to confirm your rating selection, then press [SETUP] to exitthe menu. Parental Control Set Parental Level ADULT Change PasswordSet Parental Country Code Instructions Enter-Confirm Setup-Exit Move …† Change Password1 While ‘Preferences‘ is selected, press [ †...

SETUP PLAYBACK 33 You can change the TV audio using the [AUDIO] button. Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below. • STEREO Audio Signal Stereo ➝ Mono ➝ Stereo • BIL Audio Signal BIL I ➝ BIL II ➝ (BIL Off) ➝ BIL I • MONO Audio Signal Mono...

PLAYBACK 35 34 On-Screen Display Overview Subtitle Shows the current subtitle language, and changes the setting. 1 Press [DISPLAY] during playback. The on-screen display appears on the TV screen. 2 Use [ …† ] to select the ‘Subtitle‘ icon on the on-screen display. Press [ENTER] to display a submenu....

PLAYBACK 37 36 DVD Playback Zoom The Zoom function allows you to magnify the video image and scroll around the enlarged image. 1 Press [ZOOM] during Play mode to activate the Zoom function. Each press of the [ZOOM] button changes the Zoom level as follows: X1 (normal size) ➝ X2 ➝ X4 ➝ X1 (normal siz...

PLAYBACK 39 38 Press the VCR button to set the remote control to operate the VCR deck.Turn the TV on and select the video input source connected to the DVD Recorder+VCR.Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR. Before You Begin 1 Insert a p...

PLAYBACK 41 40 Other Disc Playback Other Disc Playback The DVD Recorder+VCR can play audio CDs and MP3 files on CD-ROM,CD-R or CD-RW discs. 1 Insert the CD disc and close the tray. The Audio CD or MP3 CD menuappears on the TV screen after a few moments to load the disc. 2 Use [ …† ] to select a trac...

PLAYBACK RECORDING 43 42 Follow the instructions below to record a TV program. 1 Turn on the DVD Recorder+VCR and load a recordable disc or tape. Make sure your TV input is set to view the DVD Recorder+VCR. 2 Set the desired Recording mode by pressing [REC MODE] repeatedly. DVD: HQ (High Quality - 1...

RECORDING 45 44 Basic Recording Total time and recorded time are displayed on the TV screen after pressing [DISPLAY]. Recorded time isdisplayed on the front panel display. Checking the Recording Time 1 Press [PLAY/PAUSE] to pause the disc or tape during recording. 2 When you want to continue recordi...

RECORDING 47 46 The Timer Recording function allows you to record up to 8 programs within a period of one month. 1 Insert recordable media such as DVD+R ,DVD+RW, recordable VHS tape. 2 Press [TIMER]. The ‘Please Select Record Method’ menu appears. 3 Select ‘Manual Set Record Screen’ with [ … / † ] a...

RECORDING 49 48 Timer Recording Even if a Timer Recording is set, the DVD Recorder+VCR will not record if: • No disc is loaded.• A non-recordable disc is loaded.• DISC Lock is set to ON in the DISC Settings menu; see page 52.• There are already 49 titles recorded on the disc. You cannot enter a Time...

RECORDING 51 50 Recording from an External Input Using DV, also known as i.LINK, you can connect a DV-equipped camcorder to the DVD Recorder+VCR using asingle DV cable for input and output of audio, video, data and control signals.The i.LINK interface is also known as IEEE 1394-1995.‘i.LINK’ and the...

EDITING 53 52 Editing Lock/Unlock Disc (DVD+RW) If you want to protect a disc from accidental recording, editing, orerasing, you can lock the disc. Later, if you change your mind, youcan unlock the disc. 1 Use [ … ] to go to the top menu. 2 Press [ √ ] to display the Disc Information Menu. 3 Use [ œ...

EDITING 55 You can manage the titles on your DVD+R/RW discs using the Title menu. Play a Title To play a title: 1 Press [MENU] to display the disc menu. 2 Select the desired title you want to manage using [ …† ]. 3 Press [ √ ] to display the title menu. 4 Select ‘Play Title' using [ œ √ ] . 5 Press ...

EDITING 57 56 When you insert a DVD+R or DVD+RW disc already recorded by your DVD Recorder+VCR, you can edit the titlesand chapters in a variety of ways.To edit a recorded title, select the title on the disc menu and press [EDIT].The selected title will begin playing automatically. Titles and Chapte...

EDITING REFERENCE 59 58 Check the following guide for the possible cause of a problem before contacting customer support. No power. No picture. No sound. Playback picture is poor. DVD Recorder+VCR doesnot start playback. Picture from externalinput is distorted. Some channels are skippedover when usi...

REFERENCE 61 General Power requirements 200–240V~, 50/60 Hz Power consumption 32W Dimensions (approx.) 16.9 x 3.54 x 14.0 inches (430 x 91 x 354 mm) (w x h x d) Mass (approx.) 13.5 lbs (6.18 kg) Operating temperature 41°F to 95°F (5°C to 35°C) Operating humidity 5% to 90% Signal system PAL Colour Re...

GU ARANTEE REGISTRA TION IMPOR T ANT TEAR OFF HERE AND RETURN TODAY REGISTERING Y OUR NEW D AEW OO PR ODUCT To register you product for its 12 month guarantee please complete and return the section below. MR MRS MS SURNAME NUMBER/HOUSE NAME/STREET COUNTRY MODEL No. PRODUCT DESCRIPTION NAME OF RETAIL...

DAEWOO GUARANTEE CONDITIONS This product is guaranteed for 12 months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will be repaired free of charge during this period by the dealer from whom you purchased the unit. The guarantee is subject to the fo...