Daewoo DF-4500P/4700P - Manuals

iv Important Safeguards product. 17 DISC Do not use a cracked, deformed or repaired disc.These discs are easily broken and may causeserious personal injury and product malfunction. 18 SERVICING Do not attempt to service this unit yourself asopening or removing covers may expose you todangerous volta...

INTRODUCTION 1 Important Safeguards _________________________iiTable of Contents ______________________________1Overview ______________________________________2Identification of Controls_______________________6 INTRODUCTION Connecting Antenna/Cable ____________________11Connecting a TV _____________...

2 Overview Overview DVD, DVD+R, DVD+RW? What is a DVD? DVD (Digital Versatile Disc) is a storage medium that combines the convenience of the compact disc with thelatest digital video technology. DVD video uses modern MPEG2 data compression technology that enables anentire feature film to be stored o...

INTRODUCTION 3 Disc-related Terms Title (DVD only) The main film, accompanying feature content, or music album. Each title is assigned a title reference numberenabling you to locate it easily. Chapter (DVD only) Sections of a movie or a musical piece that are smaller than titles. A title is composed...

4 Overview Notes on Recording • The recording times shown are not exact because the DVD Recorder+VCR uses variable bit-rate video compression. This means that the exact recording time will depend on the material being recorded. • When recording a TV broadcast, if the reception is poor or the picture...

INTRODUCTION 5 Cleaning the Unit To clean the cabinet Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a milddetergent solution. Do not use strong solvents such as alcohol, benzine, or thinners, as these might damagethe surface of the unit. To obtai...

6 Front Panel ! STANDBY/ON Turns the DVD Recorder+VCR on and off. @ Cassette Compartment (VCR deck) Insert a video cassette here. # Disc Tray (DVD deck) Insert a disc here. $ VCR EJECT Ejects the tape in the VCR deck. % REC Starts recording. Press repeatedly to set therecording time. ^ STOP Stops pl...

INTRODUCTION 7 Front Panel Display Channel P R 2 3 TV Channel Input mode A u - 1 AV1 input A u - 2 AV2 input F - A u Front AV input Copy C O P Y DVD to VCR copying C O P Y VCR to DVD copying Recording on disc 1 1 : 1 5 Indicates a DVD Timer recording is set. 1 1 : 1 5 Indicates a DVD Timer Recording...

8 Selects a subtitle language, if available. - Starts playback.- Pauses playback or recording temporarily. Press again to exit Pause mode. Selects an audio language (DVD), audio channel (CD) or audio type (TV). Displays the edit menu for DVD±RW/±R discs or sets a chapter marker. Enlarges the DVD vid...

INTRODUCTION 9 Displays a disc’s Title menu, if available. Selects Recording mode: - DVD ; Approx 1 Hour (HQ mode), 2 Hours (SPmode), 4 Hours (EP mode), 8 Hours (SEP mode) - VCR : SP or LP. Selects a DVD camera angle, if available. Starts recording. Press repeatedly to set the recording time. For mo...

10 Rear panel Identification of Controls ! AC Power Cord Plug into a power outlet. @ AUDIO OUT (L, R) Connect to a TV or other equipment with audioinputs. # COMPONENT/PROGRESSIVE VIDEO OUT (Y Pb Pr) Connect to a TV with Component Video (Y Pb Pr)inputs. $ Scart socket 2 Connection of an additional de...

INTRODUCTION CONNECTIONS 11 Connections Connections Connecting Antenna/Cable 1 Disconnect the antenna/cable from the rear of your TV. 2 Connect this cable to the jack marked RF IN (FROM ANT.) onthe rear panel of the DVD Recorder+VCR. If your cable wire is connected to your TV without a converter or ...

12 Connections Choose one of the following TV connections, depending on the capabilities of your equipment. RF Connection Connect the RF OUT (TO TV) jack on the DVD Recorder+VCR to the antenna in jack on your TV using the supplied75-ohm RF cable (R). If you use this connection, tune your TV to the D...

CONNECTIONS 13 Connections Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/Pro Logic Connect the Left and Right AUDIO OUT jacks on the DVD Recorder+VCR to the left and right audio in jacks onyour amplifier, receiver, or stereo system, using the supplied audio...

14 Connections To receive audio/video signals from other equipment, connectthe AVF jacks on the DVD Recorder+VCR to the audio/videoout jacks on your external component, using optionalaudio/video cables. Connecting Optional Equipment Front of DVD Recorder+VCR Jack Panel of Accessory Component (VCR, C...

CONNECTIONS SETUP 15 After successfully connecting your DVD Recorder+VCR to your TV and other devices, this chapter will show youhow to complete the initial installation. Initial Installation Initial Installation You must follow the initial installation process to set the time, date, channels, and l...

16 Initial Setup Initial Setup The DVD Recorder+VCR Setup menu includes four categories, including: Initial Setup, Disc Operation, Disc Editand Timer Recording. Press [SETUP], [ œ / √ ] and [ENTER] on the remote control to view the first and second levels of the Setup menu. 1. Initial Setup Screen 2...

SETUP 17 Initial Setup 6 Select ‘Reception‘ using [ œ / √ ]. Use [ … / † ] to select the desired broadcast system (Aerial or Cable). Aerial: If you are using a standard antenna to receive channels. Cable: If you are using basic cable to receive channels. 7 Select ‘Auto Search‘ using [ œ / √ ]. Searc...

18 Initial Setup Clock Set1 Follow steps 1-2 as shown under ‘Manual Set’. 2 Use [ … / † ] to select ‘Clock Set‘. 3 Press [ENTER]. The ‘Clock Set’ menu appears. 4 Enter the date and time. œ / √ (left/right): Moves the cursor to the previous or next column. … / † (up/down): Changes the setting at the ...

20 Initial Setup Auto Chapter During recording, chapter markers are added automatically at fixedintervals. You can set this interval to 5 min , 10 min or 15 min . But when you set DVD Record quality “SEP”, Auto Chapter interval could beset only ‘10 min’ or ‘15 min’.To turn off automatic chapter mark...

SETUP 21 Initial Setup OSD Language Select a language for the DVD Recorder+VCR Setup menu and on-screendisplays. 1 Press [SETUP]. The Setup menu appears. While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setuppage. 2 Use [ œ ] and [ √ ] to select ‘Language ‘. 3 While ‘Language‘ is s...

22 Initial Setup 1 Press [SETUP]. The Setup menu appears. While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setuppage. 2 Use [ œ / √ ] to select ‘Preferences ‘. 3 While ‘Preferences ‘ is selected, press [ † ] to select ‘Video‘. 4 Press [ √ ]. The ‘Video‘ submenu is displayed. TV Asp...

SETUP 23 Initial Setup 1 Press [SETUP]. The Setup menu appears. While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setuppage. 2 Use [ œ / √ ] to select ‘Preferences ‘. 3 While ‘Preferences ‘ is selected, press [ † ] to select ‘Audio‘. 4 Press [ √ ]. The ‘Audio‘ submenu is displayed. ...

24 Initial Setup Set Parental Level The Parental Controls feature allows you to prevent DVDs from being played based on their ratings or to havecertain discs played with alternative scenes. You can set the parental level from ‘ADULT’ to ‘KID SAFE’. 1 Press [SETUP]. The Setup menu appears. While ‘Ini...

SETUP 25 Initial Setup Change Password1 While ‘Preferences ‘ is selected, press [ † ] to select ‘Parental Ctrl‘. 2 Press [ √ ] to select ‘Password‘. Then press [ENTER]. 3 The ‘Input Password’ submenu appears. Enter your current 4-digitpassword then press [ENTER]. 4 Enter a new 4-digit password, then...

26 This feature enables you to search for Index marks or specific times on yourVHS tapes. 1 Press [SETUP]. The Setup menu appears. While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setuppage. 2 Use [ œ / √ ] to select ‘Preferences ‘. 3 While ‘Preferences ‘ is selected, press [ † ] t...

SETUP 27 Initial Setup • Some options cannot be reset, including Parental Controls and Password.• After Restoring Defaults the unit reboots automatically and the Installation menu appears. You must set the country, language, channel, and clock setting again. If you wish, you can reset the DVD Record...

28 On-Screen Display Overview On-Screen Display Overview During disc playback, press [DISPLAY] to show information about the currentdisc. The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loadeddisc. To access the On-Screen Display (or OSD), press the...

PLAYBACK 29 On-Screen Display Overview You can change the TV audio using the [AUDIO] button. Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below. • STEREO Audio Signal : Stereo ➝ Mono ➝ Stereo • MONO Audio Signal : Mono • BIL Audio Signal : BIL1 ➝ ...

30 DVD Playback DVD Playback When a DVD+RW or unfinalized DVD+R (-R, -RW)is inserted, no title is played automatically but the current TVchannel displays on the screen. 1 If you want to play a title on the DVD+R (+RW, -R, -RW), you must press [MENU] or [PLAY] to display the disc menu of a thumbnail ...

PLAYBACK 31 DVD Playback Slow Motion Press [SLOW+] or [SLOW–] to enter Slow Motion mode. The default speed is 1/2. When you press [SLOW+] or[SLOW–] repeatedly, the speed will be set to 1/4, 1/8, 1/16, and normal speed. Zoom The Zoom function allows you to magnify the video image and scroll around th...

32 DVD Playback A-B You can repeat a scene between two points (A and B): 1 Press [PLAY/PAUSE] play to the start of the desired scene. 2 Press [A-B] to mark the start point. 3 Use [FF], [NEXT] to search the end point. 4 Press [A-B] to mark the end point. 5 The marked scenes are repeated continuously ...

PLAYBACK 33 1 Press the [VCR] button to set the remote control to operate the VCR deck. 2 Turn the TV on and select the video input source connected to the DVD Recorder+VCR. Audio system: Turn the external audio system on and select the input source connected to the DVDRecorder+VCR. Before You Begin...

34 Notes on special playback features (EG:FFW or FBWD) Horizontal lines (noise bars) will appear on the TV screen. This is normal.The audio is automatically muted during special playback modes, so there is no sound during search, slow motion, etc.During high-speed picture search, a short time is nee...

PLAYBACK 35 1 Insert the CD disc and close the tray. The Audio CD or MP3 CD menuappears on the TV screen after a few moments to load the disc. 2 Use [ …† ] to select a track or a file, then press [PLAY] or [ENTER]. During playback, the current track's elapsed playing time will appear onthe menu. Pla...

36 Other Disc Playback 5 Press [NEXT] or [PREV] to manually skip to the next or previous image. 6 Press [ √ ] (or [ œ ]) to rotate the image (counter) clockwise. 7 Press [STOP] to exit the slideshow. • When a CD contains both MP3 files and JPEG files, the default Play mode is JPEG image files.• The ...

PLAYBACK RECORDING 37 Recording from TV Follow the instructions below to record a TV program. 1 Turn on the DVD Recorder+VCR and load a recordable disc or tape. Make sure your TV input is set to view the DVD Recorder+VCR. 2 Set the desired Recording mode by pressing [REC MODE] repeatedly. DVD: HQ (H...

38 Basic Recording Total time and recorded time are displayed on the TV screen after pressing [DISPLAY]. Recorded time isdisplayed on the front panel display. Checking the Recording Time 1 Press [PLAY/PAUSE] to pause the disc or tape during recording. 2 When you want to continue recording, press [PL...

RECORDING 39 During one touch copy you can search or change REC SPEED and resume copy. 1 During One Touch Copy, press [PLAY/PAUSE] to enter COPY EDIT mode. 2 Search with [FF/REW] or [NEXT/PREV] button. 3 Press [VCR œœ DVD] and you can change REC SPEED. 4 Press [VCR œœ DVD] again to resume copy. Copy...

40 Basic Recording You can copy the contents of a VHS tape to a DVD±R or DVD±RW. This allows you to archive your old VHStapes to DVD. 1 Insert a VHS Tape. Insert the VHS videotape you wish to copy into the VCR deck. 2 Insert a DVD±R or DVD±RW disc. Insert a blank DVD±R or DVD±RW disc in the DVD deck...

RECORDING 41 The Timer Recording function allows you to record up to 8 programs within a period of one month. 1 Insert recordable media such as DVD±R ,DVD±RW, recordable VHS tape. 2 Press [TIMER]. or Press [SETUP] and select ‘Timer REC’. Then press [ENTER]. The ‘Timer Recording’ menu appears. If you...

42 Thanks to this programming system, you no longer need to tediously enter the date, programme number, startand end time. All the information needed by the DVD Recorder+VCR for programming is contained in theVideoPlus programming number. This VideoPlus number is found in most TV listings. 1 Insert ...

RECORDING 43 Timer Recording Even if a Timer Recording is set, the DVD Recorder+VCR will not record if: • No disc is loaded.• A non-recordable disc is loaded.• Disc is protected in the ‘Disc Operation’ menu; see page 45.• There are already 49 titles recorded on the disc. You cannot enter a Timer Rec...

44 Recording from External Components Note If your source is copy-protected, you will not be able to record it using the DVD Recorder+VCR. See ‘Copyright Notice‘on page 4 for more details. Recording from an External Input Recording from an External Input You can record from an external component, su...

RECORDING DISCOPERATION&EDIT 45 Disc Operation Disc Operation For recordable DVD media, such as DVD±R and DVD±RW discs, you can manage the disc using the Disc Menu.The DVD±RW Disc Menu allows you to erase, lock, or unlock your disc. You can also make it compatible withmost other DVD players. At ...

46 Disc Operation Make Compatible (DVD±RW) 'Make Compatible' for a DVD±RW will automatically create a menuscreen for navigating the disc. This menu screen is accessible bypressing [MENU] or [TITLE]. 3 Press [ … / † ] to select ‘Make Compatible‘. 4 If you want to make the disc compatible, press [ENTE...

DISCOPERATION&EDIT 47 Disc Operation Finalize (DVD±R, DVD-RW) Finalizing a DVD±R, DVD-RW ‘locks’ its recordings in place so the disccan be played on most standard DVD players or computers equippedwith DVD-ROM drives. 3 Use [ … / † ] to select ‘Finalize’ menu. 4 If you want to finalize the whole ...

48 Disc Edit Disc Edit You can manage the titles on your DVD±R/±RW discs using the Titlemenu. At first, go to Disc Edit mode. 1 Press [SETUP]. The Setup menu appears. 2 While ‘Disc Edit‘ is selected, press [ENTER] to go to the Disc Editpage. Label a Title To change the name of a title: 2 Select the ...

DISCOPERATION&EDIT 49 Disc Edit Divide (DVD±RW) This feature allows you to divide a title into two titles. 2 Select the title to be divided using [ENTER]. 3 Select ‘Divide’ using [ … † ] . 4 Press [ENTER] to divide the title. 5 Select 'OK' and press [ENTER] to confirm. 6 Press [ENTER] when the p...

50 Disc Edit Edit Chapters2 Select the title to be edited using [ENTER]. 3 Select ‘Chap Edit’ using [ … † ] . 4 Press [ENTER] to edit the chapters. 5 Select 'OK' and press [ENTER] to confirm. 6 The Chapter Edit Menu will be displayed. Use [ œ √…† ] to select one of the various chapter marker functio...

DISCOPERATION&EDIT REFERENCE 51 Troubleshooting Troubleshooting Check the following guide for the possible cause of a problem before contacting customer support. No power. No picture. No sound. Playback picture is poor. DVD Recorder+VCR doesnot start playback. Picture from external inputis disto...

52 Troubleshooting Can’t play disc recordedon this DVD Recorder+VCRon another DVD player. Cannot record or did notrecord successfully. Timer Recording notpossible. Stereo Audio Record and/orPlayback not present. Remote control does notwork properly. The disc was not finalized (or notmade compatible ...

REFERENCE 53 When the DVD Recorder+VCR is moved from a coldplace to a warm place. Under extremely humid conditions. Keep the DVD Recorder+VCR plugged into an ACpower outlet with the power on. This will helpprevent condensation. When condensation has occurred, wait a few hoursfor the DVD Recorder+VCR...

54 Manufactured under license from Dolby Laboratories. ‘Dolby‘ and the double-D symbol are trademarks ofDolby Laboratories.DTS and DTS Digital Out are registered trademarks of Digital Theater Systems, Inc. Macrovision This product incorporates copyright protection technology that is protected by met...

GU ARANTEE REGISTRA TION IMPOR T ANT TEAR OFF HERE AND RETURN TODAY REGISTERING Y OUR NEW D AEW OO PR ODUCT To register you product for its 12 month guarantee please complete and return the section below. MR MRS MS SURNAME NUMBER/HOUSE NAME/STREET COUNTRY MODEL No. PRODUCT DESCRIPTION NAME OF RETAIL...

DAEWOO GUARANTEE CONDITIONS This product is guaranteed for 12 months from the date of original purchase. A ny defect that arises due to faulty m aterials or workmanship w ill be repaired free of charge during this period by the dealer from whom you purchased the unit. The guarantee is subject to the...