Daewoo CT6600 - Manuals

Operate the PC on a sturdy level surface such as desk or table 6 DAEWOO CT6600 CT6600 USER °Ø S GUIDE Please do not overload thepower socket Please do not place magneticobjects close to the system Keep distance b etween thesystem and the wall Keep the computer away fromhigh temperature and directs u...

System Configuration 7 DAEWOO CT6600 1. System Configuration Power LED HDD LED Power Button Floppy Disk Drive FDD Eject button CD-Rom Drive CD-Rom Drive LEDCD-Rom Drive eject button USB Port MIDI/GAME port Headphone MIC in KeyboardMouse Digital LCD Monitor out(option) Monitor out Parallel port Seria...

Connect the CRT monitor to the MONITOR OUT connector colored ro y a lb l u e .If you want to use digital LCD monitor with DFP I/F, connect the digital LCDmonitor to the DIGITAL MONITOR OUT connector colored white. CT6600 Computer System applies both 110/220Vpower range with voltage selecting switch....

With telephone line connectivity, you can network PCs located anywhere inthe same building where you have access to jacks from a single telephonel i n e .Using this system, you can share the internet, printers, files, devices, etc. Connect phone jack and telephone line of the PCs you want to network...

board, to avoid possible damage to the system board. 4. Touch an unpainted metal surface on the computer chassis, such as the power supply, before touching anything inside your computer. To avoid static electricity that might harm internal component, please touchan unpainted metal surface on the com...

This section is to describe that upgrading memory and Installing the PCIoption card. Upgrading Memory This model has 64 Mbytes memory as a default and you can upgrade max256 Mbytes when you need. How to install 1 . Locate the two clips that hold the memory module in place. One clip holdsthe left edg...

13 DAEWOO CT6600 How to remove 1 . Locate the two clips that hold the memory module in place. One clip holds the left edge of the module and the other clip holds the right edge. 2. Push one clip away from the module. Then, while holding the module with one hand, push the other clip away from the mod...

Several hardware settings are made through the of jumper caps to connectjumper pins(JP) on the motherboard. Refer to motherboard layout onfollowing page.The jumper settings will be described numerically such as ° a 1 - 2 ° b , ° a 2 - 3 ° b f o r connect pins 1&2, co nnect pi ns 2&3 respecti...

JP7, JP8: Support ACPI S3 mode(STR)-option JP10: AUDIO Setting Internal VGA Setting This is not a jumper but, user can setting Enable/Disable on BIOS Setup. 18 DAEWOO CT6600 CT6600 USER °Ø S GUIDE JP10 AUDIO DESCRIPTION 1-2 ENABLE Setting when use AUDIO on motherboard. 2-3 DISABLE Setting when AMR o...

The SETUP program is a built-in program that allows configuration offunctions and devices of the system. This chapter provides information on how the setup program allows you toc o n f i g u re the function and device of your computer and how to configureeach items on the setup menus. 1. SETUP can b...

1. During boot-up sequence, press<F2> to display the SETUP menu.2. Press <ESC> to go to the ° ∞ E x i t ° ± m e n u . 3. On the ° ∞ Load Setup Deafaults ° ± option, Press <Enter> and select <Ye s > . 4. Select the ° ∞ Exit Saving Changes ° ± to save the default values and exi...

Use this menu for basic system configuration.You can make the following selections on the Main Menu itself. ¡ á System Time This option displays the current system time.Use <+> and <->keys to change the values.P ress <Enter> to move from the Hour to the Minute, to the second field....

¡ á Processor Serial Number C o n t rols detection of processor Serial Number. (Note:this option woul show only if there is Pentium ¥² processor in your system.) ¡ á Installed O/S Selected the operating system installed on your system which you will usemost commonly (N o t e: An incorrecting setting...

¡ á Local Bus IDE adqpter Enable or Disable the integrated local bus IDE adapter.Specifies an option from below. § ™ Disabled : Disabled the Local Bus IDE adapter. § ™ Primary:Use only the primary Local Bus IDE. § ™ Secondary:Use only the Secondary Local Bus IDE. § ™ Both :Use both Local Bus IDE ada...

§ ™ Video BIOS This option is selectable between ° ∞ Degault VB ° ± and ° ∞ Updated VB ° ± . Once it has both video BIOS in the system,you can select which video BIOSwill be used by the internal graphic device. This option is automatically BIOS will be used by the internal graphic device. This op to...

d. Skip loading the video BIOS patch Once the system has a video BIOS patch loaded and enabled, it ° Ø s possible during the POST, to skip the updated patch and load the defaul one instead.This is accomplished by pressing the hot key<CTRL-O>(in the same time top ress F2for setup). The system t...

To clear the current password, just hit <Enter> on New Password andc o n f i rm Password.(Maximum 5 characters can be used for a password.) ¡ á Password on boot D e t e rmines whether the password will be asked for in every boot(Enabled),or when entering in to the SETUP pro g r a m ( D i s a l...

§ ™ Hot-Key: It allows you to power on the system by the Hot-key. (Ctrl+F1/Ctrl+f2/Ctrl+f3/Ctrl+F4) § ™ Password: It allows you to power on the system by the password that you entered. Use this menu to configure Power-Management feature s .Selecting “power” from the Menu Bar displays the Power menu ...

¡ á Hard Drive If you have more than one hard drive, select “Hard Drive” from theB o o t M e n u .Select the hard drive to use for booting by using the up-and-down arro w s .Then move it to the toop of this list using the <+> key. ¡ á Removable Devicses If you have more than one removable devi...

The Inf files for Intel(R) 810 chipests contain Windows device installationfiles(*.inf) that outline to the operating system how the chipset componentsshall be configure dfor proper functioality of the following feature ; § ™ Core PCI and ISAPnP services § ™ AGP support § ™ IDE/UDMA-33/UDMA-66 suppo...

37 DAEWOO CT6600 2) Installing the Inf Update utility ¡ á Run ° ∞ Setup. exe ° ± file in ° Æ I n f i n s t ° Ø d i rectory. (That is d:\infinst\setup.exe) ¡ á Click ° Æ n e x t ° Ø button, then you will be prompted to agree to the license a g re e m e n t . ¡ á Click ° Æ y e s ° Ø b u t t o n . ¡ á ...