Dacor PHW - Manuals

PreParIng for InstallatIon NOTE: The mounting hardware included with the hardware packet is suitable for mounting to brick and masonry only. If mounting the range hood to drywall, Dacor strongly recommends the using an anchoring system designed for use with drywall. In addition, Dacor strongly recom...

To prevent back-drafts, a damper at the duct outlet may also be required. When planning new duct work, always look for the shortest, most direct route to the outside. Venting can be done through the roof or directly through the back wall to the outside. Make sure duct work does not interfere with fl...

Locate the chimney mounting bracket and position it against the ceiling as shown. Center it on the vertical center line drawn on the wall. Mark the ceiling in two places through the holes in the top of the bracket. Remove the bracket from the ceiling. Drill 5/16” holes through the two spots marked o...

Drill the mounting holes... Attach the blower assembly mounting bracket and the “L” brackets securely to the wall (5 places). 5. 6. InstallatIon InstructIons If mounting the hood to brick or masonry: Drill five 5/16” X 1 1/2” holes in the locations marked. Insert five of the provided wall anchors in...

InstallatIon InstructIons Hanging the blower assembly WARNING Do not use screws to attach the duct work to the exhaust outlet. Use duct tape only. Screws may prevent the damper flaps on the top of the hood from opening. • Inside the exhaust outlet on the top of the blower assembly, there are metal o...

electrical connection WARNINGS To avoid electrical shock or fire hazard, make sure the power supply at the fuse or junction box is turned off before proceeding with final installation. Improper connection of the hood electrical wiring may create an electric shock or fire hazard and may result in dam...

0 Carefully put the chimney over the blower assembly, taking care not to scratch the surfaces. Make sure the wiring is tucked in behind the chimney. Lock the tabs inside the chimney bottom into the slots on the bottom of the blower assembly. Slide the top of the chimney up toward the ceiling. Line u...

Installation checklist WARNING To ensure a safe and proper installation, the following checklist should be completed by the installer to ensure that no part of the installation has been overlooked. Proper installation is the responsibility of the homeowner. The importance of proper installation of y...