D-Link dws-1008 - Manuals

D-Link DWS-1008 CLI Manual CLI Conventions Be aware of the following MSS CLI conventions for command entry: • “Command Prompts” on page 3 • “Syntax: Notation” on page 4 • “Text Entry Conventions and Allowed Characters” on page 4 • “User Globs, MAC Address Globs, and VLAN Globs” on page 6 • “Port Lis...

D-Link DWS-1008 CLI Manual The MSS CLI uses standard syntax notation: • Bold monospace font identifies the command and keywords you must type. For example: set enable pass • Italic monospace font indicates a placeholder for a value. For example, you replace vlan-id in the following command with a vi...

D-Link DWS-1008 CLI Manual MAC Address Notation MSS displays MAC addresses in hexadecimal numbers with a colon (:) delimiter between bytes—for example, 00:01:02:1a:00:01. You can enter MAC addresses with either hyphen (-) or colon (:) delimiters, but colons are preferred. For shortcuts: • You can ex...

D-Link DWS-1008 CLI Manual Name “globbing” is a way of using a wildcard pattern to expand a single element into a list of elements that match the pattern. MSS accepts user globs, MAC address globs, and VLAN globs. The order in which globs appear in the configuration is important, because once a glob...

D-Link DWS-1008 CLI Manual 8 Port Lists The physical Ethernet ports on a switch can be set for connection to access points, authenticated wired users, or the network backbone. You can include a single port or multiple ports in one MSS CLI command by using the appropriate list format. The ports on a ...

D-Link DWS-1008 CLI Manual Command-Line Editing MSS editing functions are similar to those of many other network operating systems. Keyboard Shortcuts The following keyboard shortcuts are available for entering and editing CLI commands: Keyboard Shortcut(s) Function Ctrl+A Jumps to the first charact...

D-Link DWS-1008 CLI Manual 10 Single-Asterisk (*) Wildcard Character You can use the single-asterisk (*) wildcard character in globbing. For details, see “User Globs, MAC Address Globs, and VLAN Globs” on page 7. Double-Asterisk (**) Wildcard Characters The double-asterisk (**) wildcard character ma...

D-Link DWS-1008 CLI Manual 11 Understanding Command Descriptions Each command description in the D-Link Command Reference contains the following elements: • A command name, which shows the keywords but not the variables. For example, the following command name appears at the top of a command descrip...

D-Link DWS-1008 CLI Manual 1 Access Commands Use access commands to control access to the Mobility Software System (MSS) (CLI). This chapter presents access commands alphabetically. Use the following table to locate commands in this chapter based on their use. enable Places the CLI session in enable...

D-Link DWS-1008 CLI Manual 1 quit Exit from the CLI session. Syntax: quit Defaults: None. Access: All. Examples: To end the administrator’s session, type the following command: DWS-1008> quit set enablepass Sets the password that provides enabled access (for configuration and monitoring) to the s...

D-Link DWS-1008 CLI Manual 1 System Services Commands Use system services commands to configure and monitor system information for a DWS-1008 switch. This chapter presents system services commands alphabetically. Use the following table to located commands in this chapter based on their use. quickst...

D-Link DWS-1008 CLI Manual 1 clear banner motd Syntax: clear banner motd Defaults: None. Access: Enabled. Examples: To clear a banner, type the following command: DWS-1008> clear banner motd success: change accepted Note: As an alternative to clearing the banner, you can overwrite the existing ba...

D-Link DWS-1008 CLI Manual 1 clear system Clears the system configuration of the specified information. Syntax: clear system [contact | countrycode | idle-timeout | ip-address | location | name] contact countrycode idle-timeout ip-address location name Defaults: None. Access: All. Examples: To clear...

D-Link DWS-1008 CLI Manual 1 help Syntax: clear history Defaults: None. Access: All. Examples: Use this command to see a list of available commands. If you have restricted access, you see fewer commands than if you have enabled access. To display a list of CLI commands available at the enabled acces...

D-Link DWS-1008 CLI Manual 18 history Syntax: clear history Defaults: None. Access: All. Examples: To show the history of your session, type the following command: DWS-1008# history quickstart Runs a script that interactively helps you configure a new switch. Caution! The quickstart command is for c...

D-Link DWS-1008 CLI Manual 1 set banner motd Configures the banner string that is displayed before the beginning of each loginprompt for each CLI session on the DWS-1008 switch. Syntax: set banner motd ^text^ Defaults: None. Access: Enabled. Usage: Type a caret (^), then the message, then another ca...

D-Link DWS-1008 CLI Manual 0 set confirm Enables or disables the display of confirmation messages for commands thatmight have a large impact on the network. Syntax: set confirm {on | off} on Enables confirmation messages. off Disables confirmation messages. Defaults: Configuration messages are enabl...

D-Link DWS-1008 CLI Manual 1 Usage: Use this command if the output of a CLI command is greater than thenumber of lines allowed by default for a terminal type. Examples: To set the number of lines displayed to 100, type the following command: DWS-1008# set length 100 success: screen length for this s...

D-Link DWS-1008 CLI Manual set prompt Changes the CLI prompt for the DWS-1008 switch to a string you specify. Syntax: set prompt string string Defaults: The factory default for the DWS switch prompt is DWS-mm-nnnnnn, wheremm is the model number and nnnnnn is the last 6 digits of the 12-digit systemM...

D-Link DWS-1008 CLI Manual set system contact Stores a contact name for the DWS-1008 switch. Syntax: set system contact string string Defaults: None. Access: Enabled. To view the system contact string, type the show system command. Examples: The following command sets the system contact information ...

D-Link DWS-1008 CLI Manual Defaults: None. Access: Enabled. Usage: You must set the system county code to a valid value before using any set ap commands to configure an access point. Examples: To set the country code to Canada, type the following command: DWS-1008# set system country code CA success...

D-Link DWS-1008 CLI Manual Access: Enabled. Usage: This command applies to all types of CLI management sessions: console,Telnet, and SSH. The timeout change applies to existing sessions only, not to newsessions. Examples: The following command sets the idle timeout to 1800 seconds (one half hour): D...

D-Link DWS-1008 CLI Manual set system location Stores location information for the DWS-1008 switch. Syntax: set system location string string Defaults: None. Access: Enabled. To view the system location string, type the show system command. Examples: To store the location of the switch in the switch...

D-Link DWS-1008 CLI Manual 8 Usage: Entering set system name with no string resets the system name to thefactory default. To view the system name string, type the show system command. Examples: The following example sets the system name to a name that identifies the DWS switch: DWS-1008# set system ...

D-Link DWS-1008 CLI Manual show licenses Displays information about the license key(s) currently installed on an DWS-1008 switch. Syntax: show licenses Defaults: None. Access: All Examples: To view license keys, type the following command: DWS-1008# show licenses Feature : 80 additional APs See Also...

D-Link DWS-1008 CLI Manual 0 show system Displays system information. Syntax: show system Defaults: None. Access: Enabled. Examples: To show system information, type the following command: DWS-1008# show system The table on the next page describes the fields of show system output.

D-Link DWS-1008 CLI Manual Field Description Memory Current size (in megabytes) of nonvolatile memory (NVRAM) and synchronous dynamic RAM (SDRAM), plus the percentage of total memory space in use, in the following format: NVRAM size /SDRAM size (percent of total) Total Power OverEthernet Total power...

D-Link DWS-1008 CLI Manual Port Commands Use port commands to configure and manage individual ports and load-sharing port groups. This chapter presents port commands alphabetically. Use the following table to locate commands in this chapter based on their use. set port type ap on page 51set dap on p...

D-Link DWS-1008 CLI Manual clear dap Caution: When you clear a Distributed AP, MSS ends user sessions that are using the AP. Removes a Distributed AP. Syntax: clear dap dap-num dap-num Defaults: None. Access: Enabled. Examples: The following command clears Distributed AP 1: DWS-1008# clear dap 1 Thi...

D-Link DWS-1008 CLI Manual clear port-group Removes a port group Syntax: clear port-group name name name Defaults: None. Access: Enabled. Examples: The following command clears port group server1: DWS-1008# clear port-group name server1 success: change accepted. See Also:• set port-group Name of the...

D-Link DWS-1008 CLI Manual clear port name Removes the name assigned to a port. Syntax: clear port port-list name port-list Defaults: None. Access: Enabled. Examples: The following command clears the names of ports 1 through 4: DWS-1008# clear port 1-4 name See Also:• set port name List of physical ...

D-Link DWS-1008 CLI Manual Port Parameter Setting VLAN membership None. Note: Although the command changes a port to a network port, the command does not place the port in any VLAN. To use the port in a VLAN, you must add the port to the VLAN. Spanning Tree Protocol (STP) Based on the VLAN(s) you ad...

D-Link DWS-1008 CLI Manual 8 monitor port counters Displays and continually updates port statistics. Syntax: monitor port counters [octets | packets | receive-errors | transmit-errors | collisions | receive-etherstats | transmit-etherstats] octets packets recieve-errors transmit-errors collisions re...

D-Link DWS-1008 CLI Manual Usage: Each type of statistic is displayed separately. Press the Spacebar to cycle through the displays for each type. If you use an option to specify a statistic type, the display begins with that statistic type. You can use one statistic option with the command. Use the ...

D-Link DWS-1008 CLI Manual 0 Statistics Option Field Description Displayed for AllOptions Port Port the statistics are displayed for. Status Port status. The status can be Up or Down. octets Rx Octets Total numbewr of octets reveived by the port. This number includes octets received in frames that c...

D-Link DWS-1008 CLI Manual reset port Resets a port by toggling its link state and Power over Ethernet (PoE) state. Syntax: reset port port-list port-list Defaults: None. Access: Enabled. Usage: The reset command disables the port’s link and PoE (if applicable) for at least 1 second, then reenables ...

D-Link DWS-1008 CLI Manual Access: Enabled. Examples: The following command configures Distributed AP 1 for AP model MP-372 with serial-ID 0322199999: DWS-1008# set dap 1 serial-id 0322199999 model mp-372 success: change accepted. The following command removes Distributed AP 1: DWS-1008# clear dap 1...

D-Link DWS-1008 CLI Manual The following command reenables the port: DWS-1008# set port enable 4 success: set “enable” on port 4 See Also:• set reset port set port-group Administratively disables or reenables a port. Syntax: set port-group name group-name port-list mode {on | off} name group-name po...

D-Link DWS-1008 CLI Manual set port mirror Configures port mirroring. Port mirroring is a troubleshooting feature that copies (mirrors) traffic sent or received by a DWS-1008 port (the source port) to another port (the observer) on the same DWS-1008. You can attach a protocol analyzer to the observe...

D-Link DWS-1008 CLI Manual Defaults: None Access: Enabled. Usage: To simplify configuration and avoid confusion between a port’s number and its name, D-Link recommends that you do not use numbers as port names. Examples: The following command sets the name of port 4 to adminpool: DWS-1008# set port ...

D-Link DWS-1008 CLI Manual 8 A stream of large packets sent to an DWS-1008 port in such a configuration can cause forwarding on the link to stop. Examples: The following command disables autonegotiation on ports 1, 2, and 4 through 6: DWS-1008# set port negotiation 1,2,4-6 disable The following comm...

D-Link DWS-1008 CLI Manual DWS-1008# set port poe 3,5 disable If you are enabling power on these ports, they must be connected only to approved PoE devices with the correct wiring. Do you wish to continue? (y/n) [n]y The following command enables PoE on ports 2 and 4: DWS-1008# set port poe 2,4 enab...

D-Link DWS-1008 CLI Manual 0 Examples: The following command sets the port speed on ports 1, 3 through 5, and 8 to 10 Mbps and sets the operating mode to full-duplex: DWS-1008# set port speed 1,3-5,8 10 set port trap Enables or disables Simple Network Management Protocol (SNMP) linkup and linkdown t...

D-Link DWS-1008 CLI Manual 1 set port type ap Configures a DWS-1008 switch port for an (AP) access point. Caution! When you set the port type for AP use, you must specify the PoE state (enable or disable) of the port. Use the DWS-1008’s PoE to power D-Link access points or PoE enabled devices only. ...

D-Link DWS-1008 CLI Manual Port Parameter Setting VLAN Membership Removed from all VLANs. You cannot assign an AP access port to a VLAN. MSS automatically assigns AP access ports to VLANs based on user traffic. Spanning Tree Protocol (STP) Not applicable. 802.1x Uses authentication parameters config...

D-Link DWS-1008 CLI Manual set port type wired-auth Configures an DWS-1008 port for a wired authentication user. Syntax: set port type wired-auth port-list [tag tag-list ] [max-sessions num ] [auth-fall-thru {last-resort | none | web-portal}] port-listtag-list num last-resort none web-portal Default...

D-Link DWS-1008 CLI Manual show port counters Displays port statistics. Syntax: show port counters [octets | packets | receive-errors | transmit-errors | collisions | receive-etherstats | transmit-etherstats] [port port-list ] octets Displays octet statistics. packets Displays packet statistics. rec...

D-Link DWS-1008 CLI Manual show port-group Displays port group information. Syntax: show port-group [name group-name ] name group-name Displays information for the specified port group. Defaults: None. Access: All. Examples: The following command displays the configuration of port group server2: DWS...

D-Link DWS-1008 CLI Manual show port poe Displays status information for ports on which Power over Ethernet (PoE) is enabled. Syntax: show port poe [ port-list ] port-list List of physical ports. If you do not specify a port list, PoE information is displayed for all ports. Defaults: None. Access: A...

D-Link DWS-1008 CLI Manual 8 show port status Displays configuration and status information for ports. Syntax: show port status [ port-list ] port-list List of physical ports. If you do not specify a port list, information is displayed for all ports. Defaults: None. Access: All. Examples: The follow...

D-Link DWS-1008 CLI Manual VLAN Commands Use virtual LAN (VLAN) commands to configure and manage parameters for individual port VLANs on network ports, and to display information about clients within a network. This chapter presents VLAN commands alphabetically. Use the following table to locate com...

D-Link DWS-1008 CLI Manual 0 clear fdb Deletes an entry from the forwarding database (FDB). Syntax: clear fdb {perm | static | dynamic | port port-list } [vlan vlan-id ] [tag tag-value ] perm Clears permanent entries. A permanent entry does not age out and remains in the database even after a reboot...

D-Link DWS-1008 CLI Manual 1 clear security l2-restrict Removes one or more MAC addresses from the list of destination MAC addresses to which clients in a VLAN are allowed to send traffic at Layer 2. Syntax: clear security l2-restrict vlan vlan-id [permit-mac mac-addr [ mac-addr ] | all] vlan-id VLA...

D-Link DWS-1008 CLI Manual clear security l2-restrict counters Clear statistics counters for Layer 2 forwarding restriction. Syntax: clear security l2-restrict counters [vlan vlan-id | all] vlan-id VLAN name or number. all Clears Layer 2 forwarding restriction counters for all VLANs. Defaults: If yo...

D-Link DWS-1008 CLI Manual Defaults: None. Access: Enabled. Usage: If you do not specify a port-list, the entire VLAN is removed from the configuration. Note: You cannot delete the default VLAN but you can remove ports from it. To remove ports from the default VLAN, use the port port-list option. Ex...

D-Link DWS-1008 CLI Manual set fdb Adds a permanent or static entry to the forwarding database. Syntax: set fdb {perm | static} mac-addr port port-list vlan vlan-id [tag tag-value ] perm Adds a permanent entry. A permanent entry does not age out and remains in the database even after a reboot, reset...

D-Link DWS-1008 CLI Manual set fdb agingtime Changes the aging timeout period for dynamic entries in the forwarding database. Syntax: set fdb agingtime vlan-id age seconds vlan-id VLAN name or number. The timeout period change applies only to entries that match the specified VLAN. age seconds Value ...

D-Link DWS-1008 CLI Manual Defaults: Layer 2 restriction is disabled by default. Access: Enabled. Usage: You can specify multiple addresses by listing them on the same command line or by entering multiple commands. To change a MAC address, use the clear security l2-restrict command to remove it, the...

D-Link DWS-1008 CLI Manual VLAN names are case-sensitive for RADIUS authorization when a client roams to a switch. If the switch is not configured with the VLAN the client is on, but is configured with a VLAN that has the same spelling but different capitalization, authorization for the client fails...

D-Link DWS-1008 CLI Manual 8 show fdb Displays entries in the forwarding database. Syntax: show fdb [ mac-addr-glob [vlan vlan-id ]] show fdb {perm | static | dynamic | system | all} [port port-list | vlan vlan-id ] mac-addr-glob A single MAC address or set of MAC addresses. Specify a MAC address, o...

D-Link DWS-1008 CLI Manual The top line of the display identifies the characters to distinguish among the entry types. The following command displays all entries that begin with the MAC address glob 00: DWS-1008# show fdb 00:* * = Static Entry. + = Permanent Entry. # = System Entry. VLAN TAG Dest MA...

D-Link DWS-1008 CLI Manual 0 show fdb count Lists the number of entries in the forwarding database. Syntax: show fdb count {perm | static | dynamic} [vlan vlan-id ] perm Lists the number of permanent entries. A permanent entry does not age out and remains in the database even after a reboot, reset, ...

D-Link DWS-1008 CLI Manual 1 Examples: The following command shows Layer 2 forwarding restriction information for all VLANs: DWS-1008# show security l2-restrict VLAN Name En Drops Permit MAC Hits ------------------------------------------------------------------------------------------------- 1 defa...

D-Link DWS-1008 CLI Manual Examples: The following command displays information for VLAN burgundy: DWS-1008# show vlan config burgundy Admin VLAN Tunl Port VLAN Name Status State Affin Port Tag State ----------------------------------------------------------------------------------------------------...

D-Link DWS-1008 CLI Manual Quality of Service Commands Use Quality of Service (QoS) commands to configure packet prioritization in MSS. Packet prioritization ensures that DWS-1008 switches and DWL-8220AP access points give preferential treatment to high-priority traffic such as voice and video. This...

D-Link DWS-1008 CLI Manual set qos dscp-to-cos-map Changes the internal QoS value to which MSS maps a packet’s DSCP value when classifying inbound packets. Syntax: set qos dscp-to-cos-map dscp-range cos level dscp-range DSCP range. You can specify the values as decimal numbers. Valid decimal values ...

D-Link DWS-1008 CLI Manual Examples: The following command displays the default QoS settings: DWS-1008# show qos default Ingress QoS Classification Map (dscp-to-cos) Ingress DSCP CoS Level =============================================================== 00-09 0 0 0 0 0 0 0 0 1 1 10-19 1 1 1 1 1 1 2 2...

D-Link DWS-1008 CLI Manual IP Services Commands Use IP services commands to configure and manage IP interfaces, management services, the Domain Name Service (DNS), Network Time Protocol (NTP), and aliases, and to ping a host or trace a route. This chapter presents IP services commands alphabetically...

D-Link DWS-1008 CLI Manual 8 clear ip alias Removes an alias, which is a string that represents an IP address. Syntax: clear ip alias name name Alias name. Defaults: None. Access: Enabled. Examples: The following command removes the alias server1 : DWS-1008# clear ip alias server1 success: change ac...

D-Link DWS-1008 CLI Manual clear ip dns server Removes a DNS server from a DWS-1008 switch configuration. Syntax: clear ip dns server ip-addr ip-addr IP address of a DNS server. Defaults: None. Access: Enabled. Examples: The following command removes DNS server 10.10.10.69 from a switch’s configurat...

D-Link DWS-1008 CLI Manual 80 Defaults: None. Access: Enabled. Examples: The following command removes the route to destination 10.10.10.68/24 through router 10.10.10.1: DWS-1008# clear ip route 10.10.10.68/24 10.10.10.1 success: change accepted. See Also:• set ip route• show ip route clear ip telne...

D-Link DWS-1008 CLI Manual 81 clear ntp server Removes an NTP server from a switch configuration. Syntax: clear ntp server { ip-addr | all} ip-addr IP address of the server to remove, in dotted decimal notation. all Removes all NTP servers from the configuration. Defaults: None. Access: Enabled. Exa...

D-Link DWS-1008 CLI Manual 8 clear snmp community Clears an SNMP community string. Syntax: clear snmp community name comm-string comm-string Name of the SNMP community you want to clear. Defaults: None. Access: Enabled. Examples: The following command clears community string setswitch2: DWS-1008# cl...

D-Link DWS-1008 CLI Manual 8 clear snmp notify target Clears an SNMP notification target. Syntax: clear snmp notify target target-num target-num ID of the target. Defaults: None. Access: Enabled. Examples: The following command clears notification target 3: DWS-1008# clear snmp notify target 3 succe...

D-Link DWS-1008 CLI Manual 8 clear summertime Clears the summertime setting from a DWS-1008 switch. Syntax: clear summertime Defaults: None. Access: Enabled. Examples: To clear the summertime setting from a switch, type the following command: DWS-1008# clear summertime success: change accepted. See ...

D-Link DWS-1008 CLI Manual 8 clear timezone Clears the time offset for the switch’s real-time clock from Coordinated Universal Time (UTC). UTC is also know as Greenwich Mean Time (GMT). Syntax: clear timezone Defaults: None. Access: Enabled. Examples: To return the switch’s real-time clock to UTC, t...

D-Link DWS-1008 CLI Manual 8 set arp Adds an ARP entry to the ARP table. Syntax: set arp {permanent | static | dynamic} ip-addr mac-addr permanent Adds a permanent entry. A permanent entry does not age out and remains in the database even after a reboot, reset, or power cycle. static Adds a static e...

D-Link DWS-1008 CLI Manual 88 Access: Enabled. Usage: Aging applies only to dynamic entries. To reset the ARP aging timeout to its default value, use the set arp agingtime 1200 command. Examples: The following command changes the ARP aging timeout to 1800 seconds: DWS-1008# set arp agingtime 1800 su...

D-Link DWS-1008 CLI Manual 8 Examples: The following command configures IP interface 10.10.10.10/24 on VLAN default : DWS-1008# set interface default ip 10.10.10.10/24 success: set ip address 10.10.10.10 netmask 255.255.255.0 on vlan default The following command configures IP interface 10.10.20.10 ...

D-Link DWS-1008 CLI Manual 0 set interface dhcp-server Configures the MSS DHCP server. Note: Use of the MSS DHCP server to allocate client addresses is intended for temporary, demonstration deployments and not for production networks. D-Link recommends that you do not use the MSS DHCP server to allo...

D-Link DWS-1008 CLI Manual 1 • DNS servers—If these options are not set with the set interface dhcp-server command’s primary-dns and secondary-dns options, the MSS DHCP server uses the values set by the set ip dns server command. • Default router—If this option is not set with the set interface dhcp...

D-Link DWS-1008 CLI Manual set ip alias Configures an alias, which maps a name to an IP address. You can use aliases as shortcuts in CLI commands. Syntax: set ip alias name ip-addr name String of up to 32 alphanumeric characters, with no spaces. ip-addr IP address in dotted decimal notation. Default...

D-Link DWS-1008 CLI Manual set ip dns domain Configures a default domain name for DNS queries. The switch appends the default domain name to domain names or hostnames you enter in commands. Syntax: set ip dns domain name name Domain name of between 1 and 64 alphanumeric characters with no spaces (fo...

D-Link DWS-1008 CLI Manual set ip route Adds a static route to the IP route table. Syntax: set ip route {default | ip-addr mask | ip-addr/mask-length } default-router metric default Default route. A DWS-1008 switch uses the default route if an explicit route is not available for the destination. Not...

D-Link DWS-1008 CLI Manual Examples: The following command adds a default route that uses default router 10.5.4.1 and gives the route a cost of 1: DWS-1008# set ip route default 10.5.4.1 1 success: change accepted. The following commands add two default routes, and configure MSS to always use the ro...

D-Link DWS-1008 CLI Manual Examples: The following command enables the SNMP server on a DWS-1008 switch: DWS-1008# set ip snmp server enable success: change accepted. See Also:• clear snmp trap receiver• set port trap• set snmp community• set snmp trap• set snmp trap receiver• show snmp configuratio...

D-Link DWS-1008 CLI Manual 8 set ip ssh server Disables or reenables the SSH server on a switch. Caution: If you disable the SSH server, SSH access to the switch is also disabled. Syntax: set ip ssh server {enable | disable} enable Enables the SSH server. disable Disables the SSH server. Defaults: T...

D-Link DWS-1008 CLI Manual Defaults: The default Telnet port number is 23. Access: Enabled. Examples: The following command changes the Telnet port number on a switch to 5000: DWS-1008# set ip telnet 5000 success: change accepted. See Also:• clear ip telnet• set ip https server• set ip telnet server...

D-Link DWS-1008 CLI Manual 100 set ntp Enables or disables the NTP client on a DWS-1008 switch. Syntax: set ntp {enable | disable} enable Enables the NTP client. disable Disables the NTP client. Defaults: The NTP client is disabled by default. Access: Enabled. Usage: If NTP is configured on a system...

D-Link DWS-1008 CLI Manual 101 Examples: The following command configures a switch to use NTP server 192.168.1.5: DWS-1008# set ntp server 192.168.1.5 See Also:• clear ntp server• clear ntp update-interval• set ntp• set ntp update-interval• show ntp set ntp update-interval Changes how often MSS send...

D-Link DWS-1008 CLI Manual 10 set snmp community Configures a community string for SNMPv1 or SNMPv2c. Note: For SNMPv3, use the set snmp usm command to configure an SNMPv3 user. SNMPv3 does not use community strings. Syntax: set snmp community name comm-string access {read-only | read-notify | notif...

D-Link DWS-1008 CLI Manual 10 Examples: The following command configures the read-write community good_community: DWS-1008# set snmp community read-write good_community success: change accepted. The following command configures community string switchmgr1 with access level notify-read- write: DWS-10...

D-Link DWS-1008 CLI Manual 10 notification-type Name of the notification type: • APBootTraps—Generated when an access point boots. • ApNonOperStatusTraps—Generated to indicate an AP radio is nonoperational. • ApOperRadioStatusTraps—Generated when the status of an AP radio changes. • APTimeoutTraps—G...

D-Link DWS-1008 CLI Manual 10 DWS-1008# set snmp notify profile snmpprof_rfdetect send RFDetectSpoofedSsidAPTraps success: change accepted. DWS-1008# set snmp notify profile snmpprof_rfdetect send RFDetectUnAuthorizedAPTraps success: change accepted. DWS-1008# set snmp notify profile snmpprof_rfdete...

D-Link DWS-1008 CLI Manual 111 This command configures target 1 at IP address 10.10.40.9. The target’s SNMP engine ID is based on its address. The MSS SNMP engine will send notifications based on the default profile, and will require the target to acknowledge receiving them. The following command co...

D-Link DWS-1008 CLI Manual 11 set snmp security Sets the minimum level of security MSS requires for SNMP message exchanges. Syntax: set snmp security {unsecured | authenticated | encrypted | auth-req-unsec-notify} unsecured SNMP message exchanges are not secure. This is the only value supported for ...

D-Link DWS-1008 CLI Manual 11 set snmp usm Creates a USM user for SNMPv3. Note: This command does not apply to SNMPv1 or SNMPv2c. For these SNMP versions, use the set snmp community command to configure community strings. Syntax: set snmp usm usm-username snmp-engine-id {ip ip-addr | local | hex hex...

D-Link DWS-1008 CLI Manual 11 Specifies the authentication type used to authenticate communications with the remote SNMP engine. You can specify one of the following: • none—No authentication is used.• md5—Message-digest algorithm 5 is used.• sha—Secure Hashing Algorithm (SHA) is used. If the authen...

D-Link DWS-1008 CLI Manual 11 set summertime Offsets the real-time clock of a DWS-1008 switch by +1 hour and returns it to standard time for daylight savings time or a similar summertime period that you set. Syntax: set summertime summer-name [start week weekday month hour min end week weekday month...

D-Link DWS-1008 CLI Manual 11 set timedate Sets the time of day and date on the DWS-1008 switch. Syntax: set timedate {date mmm dd yyyy [time hh:mm:ss ]} date mmm dd yyyy System date: • mmm—month. • dd—day. • yyyy—year. time hh:mm:ss System time, in hours, minutes, and seconds. Defaults: None. Acces...

D-Link DWS-1008 CLI Manual 118 Defaults: If this command is not used, then the default time zone is UTC. Access: Enabled. Examples: To set the time zone for Pacific Standard Time (PST), type the following command: DWS-1008# set timezone PST -8 Timezone is set to ‘PST’, offset from UTC is -8:0 hours....

D-Link DWS-1008 CLI Manual 10 The table below describes the fields in this display. Field Description Interface VLAN name and number. Configuration Status Status of the DHCP client on this VLAN: • Enabled • Disabled DHCP State State of the IP interface: • IF_UP • IF_DOWN Lease Allocation Duration of...

D-Link DWS-1008 CLI Manual 11 The following command displays configuration and status information for each VLAN on which the DHCP server is configured: DWS-1008# show dhcp-server verbose Interface: 0 (Direct AP) Status: UP Address Range: 10.0.0.1-10.0.0.253 Interface: default(1) Status: UP Address R...

D-Link DWS-1008 CLI Manual 1 Field Description Lease Remaining Number of seconds remaining before the address lease expires. IP Address IP address leased to the client. Subnet Mask Network mask of the IP address leased to the client. Default Router Default router IP address included in the DHCP Offe...

D-Link DWS-1008 CLI Manual 18 Defaults: None. Access: Enabled. Usage: You can configure a switch to use one primary DNS server and up to five secondary DNS servers. Examples: The following commands configure a switch to use a primary DNS server and two secondary DNS servers: DWS-1008# set ip dns ser...

D-Link DWS-1008 CLI Manual 1 set ntp server Configures a DWS-1008 switch to use an NTP server. Syntax: set ntp server ip-addr ip-addr IP address of the NTP server, in dotted decimal notation. Defaults: None. Access: Enabled. Usage: You can configure up to three NTP servers. MSS queries all the serve...

D-Link DWS-1008 CLI Manual 10 set snmp notify target Configures a notification target for notifications from SNMP. A notification target is a remote device to which MSS sends SNMP notifications. You can configure the MSS SNMP engine to send confirmed notifications (informs) or unconfirmed notificati...

D-Link DWS-1008 CLI Manual 1 Defaults: By default, MSS allows nonsecure (unsecured) SNMP message exchanges. Access: Enabled. Usage: SNMPv1 and SNMPv2c do not support authentication or encryption. If you plan to use SNMPv1 or SNMPv2c, leave the minimum level of SNMP security set to unsecured. Example...

D-Link DWS-1008 CLI Manual 18 Defaults: No SNMPv3 users are configured by default. When you configure an SNMPv3 user, the default access is read-only, and the default authentication and encryption types are both none. Access: Enabled. Examples: The following command creates USM user snmpmgr1 , assoc...

D-Link DWS-1008 CLI Manual 1 weekday Day of the week to start or end the time change. Valid values are sun, mon, tue, wed, thu, fri, and sat. month Month of the year to start or end the time change. Valid values are jan, feb, mar, apr, may, jun, jul, aug, sep, oct, nov, and dec. hour Hour to start o...

D-Link DWS-1008 CLI Manual 1 show ip alias Displays the IP aliases configured on the DWS-1008 switch. Syntax: show ip alias [ name ] name Alias string. Defaults: If you do not specify an alias name, all aliases are displayed. Access: Enabled. Examples: The following command displays all the aliases ...

D-Link DWS-1008 CLI Manual 18 show ip dns Displays the DNS servers the switch is configured to use. Syntax: show ip dns Defaults: None. Access: All. Examples: The following command displays the DNS information: DWS-1008# show ip dns Domain Name: example.com DNS Status: enabled IP Address Type ------...

D-Link DWS-1008 CLI Manual 10 show ip route Displays the IP route table. Syntax: show ip route [ destination ] destination Route destination IP address, in dotted decimal notation. Defaults: None. Access: All. Usage: When you add an IP interface to a VLAN that is up, MSS adds direct and local routes...

D-Link DWS-1008 CLI Manual 11 Field Description Gateway Next-hop router for reaching the route destination.Note: This field applies only to static routes. VLAN:Interface Destination VLAN, protocol type, and IP address of the route. Because direct routes are for local interfaces, a destination IP add...

D-Link DWS-1008 CLI Manual 1 show ntp Displays NTP client information. Syntax: show ntp Defaults: None. Access: All. Examples: To display NTP information for a DWS-1008 switch, type the following command: DWS-1008> show ntp NTP client: enabled Current update-interval: 20(secs) Current time: Fri F...

D-Link DWS-1008 CLI Manual 1 show snmp community Displays the configured SNMP community strings. Syntax: show snmp community Defaults: None. Access: Enabled. See Also: • clear snmp community• set snmp community show snmp counters Displays SNMP statistics counters. Syntax: show snmp counters Defaults...

D-Link DWS-1008 CLI Manual 1 show snmp status Displays SNMP version and status information. Syntax: show snmp status Defaults: None. Access: Enabled. See Also:• set snmp community• set snmp notify target• set snmp notify profile• set snmp protocol• set snmp security• set snmp usm• show snmp communit...

D-Link DWS-1008 CLI Manual 1 show summertime Shows a switch’s offset from its real-time clock. Syntax: show summertime Defaults: There is no summertime offset by default. Access: All. Examples: To display the summertime setting on a switch, type the following command: DWS-1008# show summertime Summe...

D-Link DWS-1008 CLI Manual 1 show timezone Shows the time offset for the real-time clock from UTC on a switch. Syntax: show timezone Defaults: None. Access: All. Examples: To display the offset from UTC, type the following command: DWS-1008# show timezone Timezone set to ‘pst’, offset from UTC is -8...

D-Link DWS-1008 CLI Manual 1 Examples: In the following example, an administrator establishes a Telnet session with another switch and enters a command on the remote switch: DWS-1008# telnet 10.10.10.90 Session 0 pty tty2.d Trying 10.10.10.90... Connected to 10.10.10.90 Disconnect character is ‘^t’ ...

D-Link DWS-1008 CLI Manual 18 traceroute Traces the route to an IP host. Syntax: traceroute host [dnf] [no-dns] [port port-num ] [queries num ] [size size ] [ttl hops ] [wait ms ] host IP address, hostname, or alias of the destination host. Specify the IP address in dotted decimal notation. dnf Sets...

D-Link DWS-1008 CLI Manual 10 AAA Commands Use authentication, authorization, and accounting (AAA) commands to provide a secure network connection and a record of user activity. Location policy commands override any virtual LAN (VLAN) or security ACL assignment by AAA or the local database to help y...

D-Link DWS-1008 CLI Manual 11 clear accounting Removes accounting services for specified wireless users with administrative access or network access. Syntax: clear accounting {admin | dot1x | system} { user-glob } admin Users with administrative access to the switch through a console connection or t...

D-Link DWS-1008 CLI Manual 1 clear authentication admin Removes an authentication rule for administrative access through Telnet or Web View. Syntax: clear authentication admin user-glob user-glob A single user or set of users. Specify a username, use the double-asterisk wildcard character (**) to sp...

D-Link DWS-1008 CLI Manual 1 Defaults: None. Access: Enabled. Note: The syntax descriptions for the clear authentication commands have been separated for clarity. However, the options and behavior for the clear authentication console command are the same as in previous releases. Examples: The follow...

D-Link DWS-1008 CLI Manual 1 clear authentication mac Removes a MAC authentication rule. Syntax: clear authentication mac {ssid ssid-name | wired} mac-addr-glob ssid ssid-name SSID name to which this authentication rule applies. wired Clears a rule used for access over a switch’s wired-authenticatio...

D-Link DWS-1008 CLI Manual 1 clear authentication web Removes a WebAAA rule. Syntax: clear authentication web {ssid ssid-name | wired} user-glob ssid ssid-name SSID name to which this authentication rule applies. wired Clears a rule used for access over a switch’s wired-authentication port. user-glo...

D-Link DWS-1008 CLI Manual 1 clear mac-user Removes a user profile from the local database on the switch, for a user who is authenticated by a MAC address. (To remove a user profile in RADIUS, see the documentation for your RADIUS server.) Syntax: clear mac-user mac-addr mac-addr MAC address of the ...

D-Link DWS-1008 CLI Manual 1 Defaults: None. Access: Enabled. Examples: The following command removes an access control list (ACL) from the profile of a user at MAC address 01:02:03:04:05:06: DWS-1008# clear mac-user 01:02:03:04:05:06 attr filter-id success: change accepted. See Also:• set mac-user ...

D-Link DWS-1008 CLI Manual 18 clear mac-usergroup Removes a user group from the local database on the DWS-1008 switch, for a group of users who are authenticated by a MAC address. (To delete a MAC user group in RADIUS, see the documentation for your RADIUS server.) Syntax: clear mac-usergroup group-...

D-Link DWS-1008 CLI Manual 1 Examples: The following command removes the members of the MAC user group eastcoasters from a VLAN assignment by deleting the VLAN-Name attribute from the group: DWS-1008# clear mac-usergroup eastcoasters attr vlan-name success: change accepted. See Also:• clear mac-user...

D-Link DWS-1008 CLI Manual 180 clear user attr Removes an authorization attribute from the user profile in the local database on the switch, for a user with a password. (To remove an authorization attribute from a RADIUS user profile, see the documentation for your RADIUS server.) Syntax: clear user...

D-Link DWS-1008 CLI Manual 181 Examples: The following command removes the user Nin from the user group Nin is in: DWS-1008# clear user Nin group success: change accepted. See Also:• clear usergroup• set user group• show aaa clear usergroup Removes a user group and its attributes from the local data...

D-Link DWS-1008 CLI Manual 18 clear usergroup attr Removes an authorization attribute from a user group in the local database on the switch. (To remove an authorization attribute in RADIUS, see the documentation for your RADIUS server.) Syntax: clear usergroup group-name attr attribute-name group-na...

D-Link DWS-1008 CLI Manual 18 start-stop Sends accounting records at the start and end of a network session. stop-only Sends accounting records only at the end of a network session. method1-4 At least one of up to four methods that MSS uses to process accounting records. Specify one or more of the f...

D-Link DWS-1008 CLI Manual 18 Defaults: Accounting is disabled for all users by default. Access: Enabled. Usage: For network users with start-stop accounting whose records are sent to a RADIUS server, MSS sends interim updates to the RADIUS server when the user roams. Examples: The following command...

D-Link DWS-1008 CLI Manual 18 set authentication admin Configures authentication and defines where it is performed for specified users with administrative access through Telnet or Web View. Syntax: set authentication admin user-glob method1 [ method2 ] [ method3 ] [ method4 ] user-glob Single user o...

D-Link DWS-1008 CLI Manual 18 Usage: You can configure different authentication methods for different groups of users. (For details, see “User Globs, MAC Address Globs, and VLAN Globs” on page 7.) If you specify multiple authentication methods in the set authentication console command, MSS applies t...

D-Link DWS-1008 CLI Manual 188 user-glob Single user or set of users with administrative access over the network through Telnet or Web View. Specify a username, use the double-asterisk wildcard character (**) to specify all usernames, or use the single-asterisk wildcard character (*) to specify a se...

D-Link DWS-1008 CLI Manual 18 Usage: You can configure different authentication methods for different groups of users. (For details, see “User Globs, MAC Address Globs, and VLAN Globs” on page 7.) If you specify multiple authentication methods in the set authentication console command, MSS applies t...

D-Link DWS-1008 CLI Manual 11 method1-4 At least one of up to four methods that MSS uses to handle authentication. Specify one or more of the following methods in priority order. MSS applies multiple methods in the order you enter them. A method can be one of the following: • local—Uses the local da...

D-Link DWS-1008 CLI Manual 1 If the username does not match an authentication rule for the SSID the user is attempting to access, MSS uses the fallthru authentication type configured for the SSID, which can be last-resort, web-portal (for WebAAA), or none. Examples: The following command configures ...

D-Link DWS-1008 CLI Manual 1 method1-4 At least one of up to four methods that MSS uses to handle authentication. Specify one or more of the following methods in priority order. MSS applies multiple methods in the order you enter them. A method can be one of the following: • local—Uses the local dat...

D-Link DWS-1008 CLI Manual 1 set authentication proxy Configures a proxy authentication rule for a third-party AP’s wireless users. Syntax: set authentication proxy ssid ssid-name user-glob radius-server-group ssid ssid-name SSID name to which this authentication rule applies. user-glob A single use...

D-Link DWS-1008 CLI Manual 1 set authentication web Configures an authentication rule to allow a user to log in to the network using a web page served by the switch. The rule can be activated if the user is not otherwise granted or denied access by 802.1X, or granted access by MAC authentication. Sy...

D-Link DWS-1008 CLI Manual 1 Usage: You can configure different authentication methods for different groups of users by “globbing.” You can configure a rule either for wireless access to an SSID, or for wired access through a switch’s wired authentication port. If the rule is for wireless access to ...

D-Link DWS-1008 CLI Manual 1 set location policy Creates and enables a location policy on a switch. A location policy enables you to locally set or change authorization attributes for a user after the user is authorized by AAA, without making changes to the AAA server. Syntax: set location policy de...

D-Link DWS-1008 CLI Manual 00 set mac-user Configures a user profile in the local database on the switch for a user who can be authenticated by a MAC address, and optionally adds the user to a MAC user group. (To configure a MAC user profile in RADIUS, see the documentation for your RADIUS server.) ...

D-Link DWS-1008 CLI Manual 0 set mac-usergroup attr Creates a user group in the local database on the switch for users who are authenticated by a MAC address, and assigns authorization attributes for the group. (To configure a user group and assign authorization attributes through RADIUS, see the do...

D-Link DWS-1008 CLI Manual 0 set user Configures a user profile in the local database on the switch for a user with a password.(To configure a user profile in RADIUS, see the documentation for your RADIUS server.) Syntax: set user username password [encrypted] string username Username of a user with...

D-Link DWS-1008 CLI Manual 0 set user attr Configures an authorization attribute in the local database on the switch for a user with a password.(To assign authorization attributes in RADIUS, see the documentation for your RADIUS server.) Syntax: set user username attr attribute-name value username U...

D-Link DWS-1008 CLI Manual 08 set user group Adds a user to a user group. The user must have a password and a profile that exists in the local database on the switch.(To configure a user in RADIUS, see the documentation for your RADIUS server.) Syntax: set user username group group-name username Use...

D-Link DWS-1008 CLI Manual 0 Defaults: None. Access: Enabled. Usage: To change the value of an attribute, enter set usergroup attr with the new value. To delete an attribute, use clear usergroup attr. To add a user to a group, user the command set user group. You can assign attributes to individual ...

D-Link DWS-1008 CLI Manual 10 show aaa Displays all current AAA settings. Syntax: show aaa Defaults: None. Access: Enabled. Examples: To display all current AAA settings, type the following command: DWS-1008# show aaa Default Values authport=1812 acctport=1813 timeout=5 acct-timeout=5 retrans=3 dead...

D-Link DWS-1008 CLI Manual 1 show accounting statistics Displays the AAA accounting records for wireless users. The records are stored in the local database on the switch.(To display RADIUS accounting records, see the documentation for your RADIUS server.) Syntax: show accounting statistics Defaults...

D-Link DWS-1008 CLI Manual 1 The table below describes the fields that can appear in show accounting statistics output. Field Description Date and time Date and time of the accounting record. Acct-Status-Type Type of accounting record: • START • STOP • UPDATE Acct-Authentic Location where the user w...

D-Link DWS-1008 CLI Manual 1 Cryptography Commands A digital certificate is a form of electronic identification for computers. The switch requires digital certificates to authenticate its communications to Web View, to WebAAA clients, and to Extensible Authentication Protocol (EAP) clients for which...

D-Link DWS-1008 CLI Manual 1 crypto ca-certificate Installs a certificate authority’s own PKCS#7 certificate into the switch certificate and key storage area. Syntax: crypto ca-certificate {admin | eap | web} PEM-formatted-certificate admin Stores the certificate authority’s certificate that signed ...

D-Link DWS-1008 CLI Manual 1 Examples The following command adds the certificate authority’s certificate to switch certificate and key storage: DWS-1008# crypto ca-certificate admin Enter PEM-encoded certificate -----BEGIN CERTIFICATE----- MIIDwDCCA2qgAwIBAgIQL2jvuu4PO5FAQCyewU3ojANBgkqhkiG9wOBAQUFA...

D-Link DWS-1008 CLI Manual 1 1. Open the PKCS#7 object file with an ASCII text editor such as Notepad or vi. 2. Enter the crypto certificate command on the CLI command line. 3. When MSS prompts you for the PEM-formatted certificate, paste the PKCS#7 object file onto the command line. The switch veri...

D-Link DWS-1008 CLI Manual 18 128 | 512 | 1024 | Length of the key pair in bits. 2048 Note: The minimum key length for SSH is 1024. The length 128 applies only to domain and is the only valid option for it. Defaults: None. Access: Enabled. Usage: You can overwrite a key by generating another key of ...

D-Link DWS-1008 CLI Manual 0 CSR for admin is -----BEGIN CERTIFICATE REQUEST----- MIIBuzCCASQCAQAwezELMAkGA1UEBhMCdXMxCzAJBgNVBAgTAmNhMQswCQYDVQQH EwJjYTELMAkGA1UEChMCY2ExCzAJBgNVBAsTAmNhMQswCQYDVQQDEwJjYTEYMBYG CSqGSIb3DQEJARYJY2FAY2EuY29tMREwDwYJKoZIhvcNAQkCEwJjYTCBnzANBgkq hkiG9w0BAQEFAAOBjQAwgYk...

D-Link DWS-1008 CLI Manual 1 Common Name Specify a unique name for the switch, in up to 80 alphanumeric string characters with no spaces. Use a fully qualified name if such names are supported on your network. This field is required. Note: If you are generating a WebAAA (web) certificate, use a comm...

D-Link DWS-1008 CLI Manual crypto otp Sets a one-time password (OTP) for use with the crypto pkcs12 command. Syntax: crypto otp {admin | eap | web} one-time-password admin Creates a one-time password for installing a PKCS#12 object file for an administrative certificate and key pair—and optionally t...

D-Link DWS-1008 CLI Manual crypto pkcs12 Unpacks a PKCS#12 object file into the certificate and key storage area on the switch. This object file contains a public-private key pair, a switch certificate signed by a certificate authority, and the certificate authority’s certificate. Syntax: crypto pkc...

D-Link DWS-1008 CLI Manual show crypto ca-certificate Displays information about the certificate authority’s PEM-encoded PKCS#7 certificate. Syntax: show crypto ca-certificate {admin | eap | web} admin Displays information about the certificate authority’s certificate that signed the administrative ...

D-Link DWS-1008 CLI Manual show crypto certificate Displays information about one of the cryptographic certificates installed on the switch. Syntax: show crypto certificate {admin | eap | web} admin Displays information about the administrative certificate that authenticates the switch to Web View. ...

D-Link DWS-1008 CLI Manual show crypto key domain Displays the checksum (also called a fingerprint) of the public key used to authenticate management traffic between switches. Syntax: show crypto key domain Defaults: None. Access: Enabled. Examples: To display the fingerprint for switch-switch secur...

D-Link DWS-1008 CLI Manual RADIUS and Server Groups Commands Use RADIUS commands to set up communication between a switch and groups of up to four RADIUS servers for remote authentication, authorization, and accounting (AAA) of administrators and network users. This chapter presents RADIUS commands ...

D-Link DWS-1008 CLI Manual 8 clear radius Resets parameters that were globally configured for RADIUS servers to their default values. Syntax: clear radius {deadtime | key | retransmit | timeout} deadtime Number of minutes to wait after declaring an unresponsive RADIUS server unavailable before retry...

D-Link DWS-1008 CLI Manual clear radius client system-ip Removes the switch’s system IP address from use as the permanent source address in RADIUS client requests from the switch to its RADIUS server(s). Syntax: clear radius client system-ip deadtime Number of minutes to wait after declaring an unre...

D-Link DWS-1008 CLI Manual 0 clear radius proxy client Removes RADIUS proxy client entries for third-party APs. Syntax: clear radius proxy client all Defaults: None Access: Enabled. Examples: The following command clears all RADIUS proxy client entries from the switch: DWS-1008# clear radius proxy c...

D-Link DWS-1008 CLI Manual 1 clear radius server Removes the named RADIUS server from the switch configuration. Syntax: clear radius server server-name server-name Name of a RADIUS server configured to perform remote AAA services for the switch. Defaults: None Access: Enabled. Examples: The followin...

D-Link DWS-1008 CLI Manual To disable load balancing in a server group shorebirds , type the following command: DWS-1008# set server group shorebirds load-balance disable success: change accepted. See Also: • set server group set radius Configures global defaults for RADIUS servers that do not expli...

D-Link DWS-1008 CLI Manual set radius client system-ip Causes all RADIUS requests to be sourced from the IP address specified by the set system ip-address command, providing a permanent source IP address for RADIUS packets sent from the switch. Syntax: set radius client system-ip Defaults: None. If ...

D-Link DWS-1008 CLI Manual Access: Enabled. Usage: AAA for third-party AP users has additional configuration requirements. Examples: The following command configures a RADIUS proxy entry for a third-party AP RADIUS client at 10.20.20.9, sending RADIUS traffic to the default UDP ports 1812 and 1813 o...

D-Link DWS-1008 CLI Manual set radius server Configures RADIUS servers and their parameters. By default, the switch automatically sets all these values except the password (key). Syntax: set radius server server-name [address ip-address ] [auth-port port-number ] [acct-port port-number ] [timeout se...

D-Link DWS-1008 CLI Manual 8 set server group Configures a group of one to four RADIUS servers. Syntax: set server group group-name members server-name1 [ server-name2 ] [ server-name3 ] [ server-name4 ] group-name Server group name of up to 32 characters, with no spaces or tabs. members The names o...

D-Link DWS-1008 CLI Manual set server group load-balance Enables or disables load balancing among the RADIUS servers in a server group. Syntax: set server group group-name load-balance {enable | disable} group-name Server group name of up to 32 characters. load-balance Enables or disables load balan...

D-Link DWS-1008 CLI Manual 1 clear dot1x bonded-period Resets the Bonded Auth period to its default value. Syntax: clear dot1x max-req Defaults: The default bonded authentication period is 0 seconds. Access: Enabled. Examples: To reset the Bonded period to its default, type the following command: DW...

D-Link DWS-1008 CLI Manual clear dot1x port-control Resets all wired authentication ports on the switch to default 802.1X authentication. Syntax: clear dot1x port-control Defaults: By default, all wired authentication ports are set to auto and they process authentication requests as determined by th...

D-Link DWS-1008 CLI Manual clear dot1x reauth-max Resets the maximum number of reauthorization attempts to the default setting. Syntax: clear dot1x reauth-max Defaults: The default is 2 attempts. Access: Enabled. Examples: Type the following command to reset the maximum number of reauthorization att...

D-Link DWS-1008 CLI Manual clear dot1x timeout auth-server Resets to the default setting the number of seconds that must elapse before the switch times out a request to a RADIUS server. Syntax: clear dot1x reauth-period Defaults: The default is 30 seconds. Access: Enabled. Examples: To reset the def...

D-Link DWS-1008 CLI Manual clear dot1x tx-period Resets to the default setting the number of seconds that must elapse before the switch retransmits an EAP over LAN (EAPoL) packet. Syntax: clear dot1x tx-period Defaults: The default is 5 seconds. Access: Enabled. Examples: Type the following command ...

D-Link DWS-1008 CLI Manual set dot1x bonded-period Changes the Bonded Auth™ (bonded authentication) period. The Bonded Auth period is the number of seconds MSS allows a Bonded Auth user to reauthenticate. Syntax: set dot1x bonded-period seconds seconds Number of seconds MSS retains session informati...

D-Link DWS-1008 CLI Manual 8 See Also: • clear dot1x max-req• show dot1x set dot1x port-control Determines the 802.1X authentication behavior on individual wired authentication ports or groups of ports. Syntax: set dot1x port-control {forceauth | forceunauth | auto} port-list forceauth Forces the sp...

D-Link DWS-1008 CLI Manual set dot1x quiet-period Sets the number of seconds a switch remains quiet and does not respond to a supplicant after a failed authentication. Syntax: set dot1x quiet-period seconds seconds Specify a value between 0 and 65,535. Defaults: The default is 60 seconds. Access: En...

D-Link DWS-1008 CLI Manual 0 set dot1x reauth-period Sets the number of seconds that must elapse before the switch attempts reauthentication. Syntax: set dot1x reauth-period seconds seconds Specify a value between 60 (1 minute) and 1,641,600 (19 days). Defaults: The default is 3600 seconds (1 hour)....

D-Link DWS-1008 CLI Manual 1 set dot1x timeout supplicant Sets the number of seconds that must elapse before the switch times out an authentication session with a supplicant (client). Syntax: set dot1x timeout supplicant seconds seconds Specify a value between 1 and 65,535. Defaults: The default is ...

D-Link DWS-1008 CLI Manual set dot1x wep-rekey Enables or disables Wired Equivalency Privacy (WEP) rekeying for broadcast and multicast encryption keys. Syntax: set dot1X wep-rekey {enable | disable} enable Causes the broadcast and multicast keys for WEP to be rotated at an interval set by the set d...

D-Link DWS-1008 CLI Manual show dot1x Displays 802.1X client information for statistics and configuration settings. Syntax: show dot1x {clients | stats | config} clients Displays information about active 802.1X clients, including client name, MAC address, and state. stats Displays global 802.1X stat...

D-Link DWS-1008 CLI Manual Type the following command to display the 802.1X clients: DWS-1008# show dot1x config 802.1X user policy ---------------------- ‘host/bob-laptop.mycorp.com’ on ssid ‘mycorp’ doing PASSTHRU ’bob.mycorp.com’ on ssid ‘mycorp’ doing PASSTHRU (bonded) 802.1X parameter setting -...

D-Link DWS-1008 CLI Manual Type the following command to display 802.1X statistics: DWS-1008# show dot1x stats 802.1X statistic value ---------------------- ---------------------- Enters Connecting: 709 Logoffs While Connecting: 112 Enters Authenticating: 467 Success While Authenticating: 0 Timeouts...

D-Link DWS-1008 CLI Manual Session Management Commands Use session management commands to display and clear administrative and network user sessions. This chapter presents session management commands alphabetically. Use the following table to locate commands in this chapter based on their use. Admin...

D-Link DWS-1008 CLI Manual To clear all administrative Telnet sessions, type the following command: DWS-1008# clear sessions telnet This will terminate manager sessions, do you wish to continue? (y|n) [n] y To clear Telnet client session 0, type the following command: DWS-1008# clear sessions telnet...

D-Link DWS-1008 CLI Manual 8 Examples: To clear all sessions for MAC address 00:01:02:03:04:05, type the following command: DWS-1008# clear sessions network mac-addr 00:01:02:03:04:05 This will terminate manager sessions, do you wish to continue? (y|n) [n] y To clear session 9, type the following co...

D-Link DWS-1008 CLI Manual 0 The table below describes the fields of the show sessions admin, show sessions console, and show sessions telnet displays. show sessions admin, show sessions console, and show sessions telnet Output Field Description Tty The Telnet terminal number, or console for adminis...

D-Link DWS-1008 CLI Manual The following command displays information about network session 88: DWS-1008# show sessions network session-id 88 Local Id: 88 Global Id: SESS-88-00040f-876766-623fd6 State: ACTIVE SSID: Rack-39-PM Port/Radio: 10/1 MAC Address: 00:0f:66:f4:71:6d User Name: last-resort-Rac...

D-Link DWS-1008 CLI Manual Additional show sessions network verbose Output Field Description Client MAC MAC address of the session user. GID Global session ID, a unique session number. State Status of the session:• AUTH, ASSOC REQ—Client is being associated by the 802.1X protocol.• AUTH AND ASSOC—Cl...

D-Link DWS-1008 CLI Manual show sessions network session-id Output Field Description Local Id Identifier for the session on this particular switch. (This is the session ID you specify when entering the show sessions network session-id command.) Global Id Unique session identifier within the network....

D-Link DWS-1008 CLI Manual RF Detection Commands MSS automatically performs RF detection scans on enabled and disabled radios to detect rogue access points. A rogue access point is a BSSID (MAC address associated with an SSID) that does not belong to a D-Link device and is not a member of the ignore...

D-Link DWS-1008 CLI Manual 8 clear rfdetect attack-list Removes a MAC address from the attack list. Syntax: clear rfdetect attack-list mac-addr mac-addr MAC address you want to remove from the attack list. Defaults: None. Access: Enabled. Examples: The following command clears MAC address 11:22:33:4...

D-Link DWS-1008 CLI Manual clear rfdetect ssid-list Removes an SSID from the permitted SSID list. Syntax: clear rfdetect ssid-list ssid-name ssid-name SSID name you want to remove from the permitted SSID list. Defaults: None. Access: Enabled. Examples: The following command clears SSID mycorp from t...

D-Link DWS-1008 CLI Manual 0 set rfdetect attack-list Adds an entry to the attack list. The attack list specifies the MAC addresses of devices that MSS should issue countermeasures against whenever the devices are detected on the network. The attack list can contain the MAC addresses of APs and clie...

D-Link DWS-1008 CLI Manual 1 MSS can place a client in the black list due to an association, reassociation or disassociation flood from the client. The client black list applies only to the switch on which the list is configured. Switches do not share client black lists. Examples: The following comm...

D-Link DWS-1008 CLI Manual See Also:• clear rfdetect ignore• show rfdetect ignore set rfdetect log Disables or reenables generation of log messages when rogues are detected or when they disappear. Syntax: set rfdetect log {enable | disable} enable Enables logging of rogues. disable Disables logging ...

D-Link DWS-1008 CLI Manual Usage: The command applies only to APs managed by the switch on which you enter the command. To enable signatures on all APs, enter the command on each switch. Note: You must use the same AP signature setting (enabled or disabled) on all switches. Examples: The following c...

D-Link DWS-1008 CLI Manual set rfdetect vendor-list Adds an entry to the permitted vendor list. The permitted vendor list specifies the third-party AP or client vendors that are allowed on the network. MSS does not list a device as a rogue or interfering device if the device’s OUI is in the permitte...

D-Link DWS-1008 CLI Manual Examples: The following example shows the attack list on switch: DWS-1008# show rfdetect attack-list Total number of entries: 1 Attacklist MAC Port/Radio/Chan RSSI SSID ----------------- ----------------- ------ ------------ 11:22:33:44:55:66 dap 2/1/11 -53 rogue-ssid See ...

D-Link DWS-1008 CLI Manual Examples: The following command shows information about all wireless clients detected by a switch’s APs: DWS-1008# show rfdetect clients Total number of entries: 30 Client MAC Client AP MAC AP Port/Radio NoL Type Last Vendor Vendor /Channel seen ----------------- ------- -...

D-Link DWS-1008 CLI Manual Type Classification of the rogue device:• rogue—Wireless device that is on the network but is not supposed to be on the network. • intfr—Wireless device that is not part of your network and is not a rogue, but might be causing RF interference with AP radios. • known—Device...

D-Link DWS-1008 CLI Manual 8 Usage: This command is valid only on the seed switch Examples: The following example displays countermeasures status: DWS-1008# show rfdetect countermeasures Total number of entries: 190 Rogue MAC Type Countermeasures IPaddr Port/Radio Radio Mac /Channel ----------------...

D-Link DWS-1008 CLI Manual 80 show rfdetect data Displays information about the APs detected by a switch. Syntax: show rfdetect data Defaults: None. Access: Enabled. Usage: You can enter this command on any switch. The output applies only to the switch on which you enter the command. To display all ...

D-Link DWS-1008 CLI Manual 81 The table below describes the fields in this display. Field Description BSSID MAC address of the SSID used by the detected device. Vendor Company that manufactures or sells the rogue device. Type Classification of the rogue device:• rogue—Wireless device that is not sup...

D-Link DWS-1008 CLI Manual 8 show rfdetect ssid-list Displays the entries in the permitted SSID list. Syntax: show rfdetect ssid-list Defaults: None. Access: Enabled. Examples: The following example shows the permitted SSID list on switch: DWS-1008# show rfdetect ssid-list Total number of entries: 3...

D-Link DWS-1008 CLI Manual 8 show rfdetect visible Displays the BSSIDs discovered by a specific D-Link radio. The data includes BSSIDs transmitted by other D-Link radios as well as by third-party access points. Syntax: show rfdetect visible mac-addr Syntax: show rfdetect visible ap mp-num [radio{1|2...

D-Link DWS-1008 CLI Manual 8 The table below describes the fields in this display. Field Description Transmit MAC MAC address the rogue device that sent the 802.11 packet detected by the AP radio Vendor Company that manufactures or sells the rogue device. Type Classification of the rogue device:• ro...

D-Link DWS-1008 CLI Manual 8 File Management Commands Use file management commands to manage system files and to display software and boot information. This chapter presents file management commands alphabetically. Use the following table to locate commands in this chapter based on their use. Softwa...

D-Link DWS-1008 CLI Manual 8 backup Creates an archive of switch system files and optionally, user file, in Unix tape archive ( tar ) format. Syntax: backup system [tftp:/ ip-addr /] filename [all | critical] [ tftp:/ ip-addr/]filename Name of the archive file to create. You can store the file local...

D-Link DWS-1008 CLI Manual 88 Examples: The following command creates an archive of the system-critical files and copies the archive directly to a TFTP server. The filename in this example includes a TFTP server IP address, so the archive is not stored locally on the switch. DWS-1008# backup system ...

D-Link DWS-1008 CLI Manual 8 Examples: The following commands back up the configuration file on a switch, reset the switch to its factory default configuration, and reboot the switch: DWS-1008# copy configuration tftp://10.1.1.1/backupcfg success: sent 365 bytes in 0.401 seconds [ 910 bytes/sec] DWS...

D-Link DWS-1008 CLI Manual 0 Usage: The filename and file: filename URLs are equivalent. You can use either URL to refer to a file in a switch’s nonvolatile memory. The tftp: //ip-addr/filename URL refers to a file on a TFTP server. If DNS is configured on the switch, you can specify a TFTP server’s...

D-Link DWS-1008 CLI Manual 1 delete Caution: MSS does not prompt you to verify whether you want to delete a file. When you press Enter after typing a delete command, MSS immediately deletes the specified file. Note: MSS does not allow you to delete the currently running software image file or the ru...

D-Link DWS-1008 CLI Manual dir Displays a list of the files in nonvolatile storage and temporary files. Syntax: dir [ subdirname ] | [file:] | [core:] | [boot0:] | [boot1:] subdirname Subdirectory name. If you specify a subdirectory name, the command lists the files in that subdirectory. Otherwise, ...

D-Link DWS-1008 CLI Manual The table below describes the fields in the dir output. Field Description Filename Filename or subdirectory name.For files, the directory name is shown in front of the filename (for example, file:configuration). The file: directory is the root directory. For subdirectories...

D-Link DWS-1008 CLI Manual load config Caution: This command completely removes the running configuration and replaces it with the configuration contained in the file. D-Link recommends that you save a copy of the current running configuration to a backup configuration file before loading a new conf...

D-Link DWS-1008 CLI Manual md5 Calculates the MD5 checksum for a file in the switch’s nonvolatile storage. Syntax: md5 [boot0: | boot1:] filename boot0: | boot1: Boot partition into which you copied the file. filename: Name of the file. Defaults: None. Access: Enabled. Usage: You must include the bo...

D-Link DWS-1008 CLI Manual DWS-1008# dir ========================================================== file: Filename Size Created file:configuration 17 KB May 21 2004, 18:20:53 file:configuration.txt 379 bytes May 09 2004, 18:55:17 corp2/ 512 bytes May 21 2004, 19:22:09 corp_a/ 512 bytes May 21 2004, ...

D-Link DWS-1008 CLI Manual 8 Examples: The following command restarts a switch that does not have any unsaved configuration changes: DWS-1008# reset system This will reset the entire system. Are you sure (y/n) y The following commands attempt to restart a switch with a running configuration that has...

D-Link DWS-1008 CLI Manual Usage: If a file in the archive has a counterpart on the switch, the archive version of the file replaces the file on the switch. The restore command does not delete files that do not have counterparts in the archive. For example, the command does not completely replace th...

D-Link DWS-1008 CLI Manual 00 Examples: The following example removes subdirectory corp2 : DWS-1008# rmdir corp2 success: change accepted. See Also:• dir• mkdir save config Saves the running configuration to a configuration file. Syntax: save config [ filename ] filename Name of the configuration fi...

D-Link DWS-1008 CLI Manual 01 set boot backup-configuration Specifies the name of a backup configuration file to be used in the event that MSS cannot read the switch’s configuration file at boot time. Syntax: set boot backup-configuration filename filename Name of the file to use as a backup configu...

D-Link DWS-1008 CLI Manual 0 set boot partition Specifies the boot partition in which to look for the system image file following the next system reset, software reload, or power cycle. Syntax: set boot partition {boot0 | boot1} boot0 Boot partition 0. boot1 Boot partition 1. Defaults: By default, a...

D-Link DWS-1008 CLI Manual 0 The table below describes the fields in the show boot output. Field Description Configured boot version Software version the switch will run next time the software is rebooted. Configured boot image Boot partition and image filename MSS will use to boot next time the sof...

D-Link DWS-1008 CLI Manual 0 • spantree • system • trace • vlan • vlan-fdb If you do not specify a configuration area, nondefault information for all areas is displayed. all Includes configuration items that are set to their default values. Defaults: None. Access: Enabled. Usage: If you do not use o...

D-Link DWS-1008 CLI Manual 0 The table below describes the fields in the show version output. Field Description Build Information Factory timestamp of the image file. Label Software version and build date. Build Suffix Build suffix. Model Build model. Hardware Version information for the switch’s mo...

D-Link DWS-1008 CLI Manual 0 Access Point Commands Use DWL-8220AP access point commands to configure and manage DWL-8220AP access points. Be sure to do the following before using the commands: • Define the country-specific IEEE 802.11 regulations on the DWS-1008 switch. • Install the DWL-8220AP acce...

D-Link DWS-1008 CLI Manual 08 Examples The following command disables and resets radio 2 on the DWL-8220AP access point connected to port 3: DWS-1008# clear ap 3 radio 2 clear dap boot-configuration Removes the static IP address configuration for a Distributed AP. Syntax: clear dap boot-configuratio...

D-Link DWS-1008 CLI Manual 0 clear radio-profile Removes a radio profile or resets one of the profile’s parameters to its default value. Syntax: clear radio-profile name [parameter] nameparameter Defaults If you reset an individual parameter, the parameter is returned to it’s default value. Access: ...

D-Link DWS-1008 CLI Manual 10 See Also: • set {ap | dap} radio radio-profile • set radio-profile mode • show {ap | dap} config • show radio-profile clear service-profile Removes a service profile or resets one of the profile’s parameters to its default value. Syntax: clear service-profile name [soda...

D-Link DWS-1008 CLI Manual 1 set dap auto Creates a profile for automatic configuration of Distributed APs. Syntax: set dap auto Defaults: None. Access: Enabled. The following Table lists the configurable profile parameters and their defaults. The only parameter that requires configuration is the pr...

D-Link DWS-1008 CLI Manual 1 Examples: The following command creates a profile for automatic Distributed AP configuration: DWS-1008# set dap auto success: change accepted. See Also:• set dap auto mode• set dap auto persistent• set dap auto radiotype• set {ap | dap} bias• set {ap | dap} blink• set {a...

D-Link DWS-1008 CLI Manual 1 set dap auto persistent Converts a temporary AP configuration created by the AP configuration profile into a persistent AP configuration on the DWS-1008. Syntax: set dap auto persistent [ dap-num | all] dap-num all Defaults: None. Access: Enabled. Usage: To display the D...

D-Link DWS-1008 CLI Manual 18 Examples: The following command configures Distributed AP 1 to use IP address 172.16.0.42 with a 24-bit netmask, and use 172.16.0.20 as its default gateway: DWS-1008# set dap 1 boot-ip ip 172.16.0.42 netmask 255.255.255.0 gateway 172.16.0.20 mode enable success: change ...

D-Link DWS-1008 CLI Manual 0 Usage: When this command is configured, all Ethernet frames emitted from the Distributed AP are formatted with an 802.1Q tag with a specified VLAN number. Frames sent to the Distributed AP that are not tagged with this value are ignored. Examples: The following command c...

D-Link DWS-1008 CLI Manual 1 set dap fingerprint Verifies an AP’s fingerprint on an DWS-1008. If AP-DWS security is required by an DWS-1008, an AP can establish a management session with the switch only if you have verified the AP’s identity by verifying its fingerprint on the switch. Syntax: set da...

D-Link DWS-1008 CLI Manual set {ap | dap} group Configures a named group of AP access points. MSS automatically load balances sessions among the access points in a group. To balance the sessions, MSS rejects an association request for an access point’s radio if that radio has at least four more acti...

D-Link DWS-1008 CLI Manual set {ap | dap} location Specifies location information for an AP. Syntax: set {ap port-list | dap { dap-num } location string ap port-list dap dap-num location string Defaults: None. Access: Enabled Usage: Use this command to specify information about the location of the A...

D-Link DWS-1008 CLI Manual set {ap | dap} name Changes an AP name. Syntax: set {ap port-list | dap dap-num } name name ap port-list dap dap-num name Defaults: The default name of a directly attached AP is based on the port number of the AP access port attached to the AP. For example, the default nam...

D-Link DWS-1008 CLI Manual 1 Defaults: When you create a new profile, the radio parameters in the profile are set to their factory default values. To enable or disable all radios that use a specific radio profile, use set radio-profile. Access: Enabled. Examples: The following command enables radio ...

D-Link DWS-1008 CLI Manual Examples: The following command configures the transmit power on the 802.11a radio on the DWL-8220AP access point connected to port 5: DWS-1008# set ap 5 radio 1 tx-power 10 success: change accepted. The following command configures the channel and transmit power on the 80...

D-Link DWS-1008 CLI Manual set radio-profile active-scan Disables or reenables active RF detection scanning on the DWL-8220AP radios managed by a radio profile. When active scanning is enabled, DWL-8220AP radios look for rogue devices by sending probe any requests (probe requests with a null SSID na...

D-Link DWS-1008 CLI Manual set radio-profile auto-tune power-interval Sets the interval at which RF Auto-Tuning decides whether to change the power level on radios in a radio profile. At the end of each interval, MSS processes the results of the RF scans performed during the previous interval, and c...

D-Link DWS-1008 CLI Manual 1 Defaults: The default interval is 60 seconds. Access: Enabled. Examples: The following command changes the power ramp interval for radios in radio profile rp2 to 120 seconds: DWS-1008# set radio-profile rp2 auto-tune power-ramp-interval 120 success: change accepted. See ...

D-Link DWS-1008 CLI Manual The following command causes radios managed by radio profile radprof3 to issue countermeasures against devices in the DWS-1008’s attack list: DWS-1008# radio-profile radprof3 countermeasures configured success: change accepted. Note that when you issue this command, counte...

D-Link DWS-1008 CLI Manual set radio-profile frag-threshold Changes the fragmentation threshold for the DWL-8220AP radios in a radio profile. Thefragmentation threshold is the threshold at which the long-retry-count is applicable instead of the short-retry-count. The long-retry-count specifies the n...

D-Link DWS-1008 CLI Manual Defaults: The default maximum receive threshold for DWL-8220AP radios is 2000ms (2 seconds). Access: Enabled. Usage: You must disable all radios that are using a radio profile before you can change parameters in the profile. Use the set radio-profile mode command. Examples...

D-Link DWS-1008 CLI Manual 0 set radio-profile qos-mode Sets the prioritization mode for forwarding queues on AP radios managed by the radio profile. Syntax: set radio-profile name qos-mode {svp | wmm} name svp wmm Defaults: The default QoS mode is wmm. Access: Enabled. Usage: When SVP is enabled, A...

D-Link DWS-1008 CLI Manual 1 Syntax: set radio-profile name rfid-mode {enable | disable} name enable disable Defaults: The default is disable. Access: Enabled. Examples: The following command enables radios managed by radio profile rp1 to act as asset location receivers: DWS-1008# set radio-profile ...

D-Link DWS-1008 CLI Manual set service-profile attr Configures authorization attributes that are applied by default to users accessing the SSID managed by the service profile. These SSID default attributes are applied in addition to any supplied by the RADIUS server or from the local database. Synta...

D-Link DWS-1008 CLI Manual 8 Defaults: By default, a service profile does not have any authorization attributes set. Access: Enabled. Usage: To change the value of a default attribute for a service profile, use the set service-profile attr command and specify a new value. The SSID default attributes...

D-Link DWS-1008 CLI Manual 0 set service-profile auth-fallthru Specifies the authentication type for users who do not match an 802.1X or MAC authentication rule for an SSID managed by the service profile. When a user tries to associate with an SSID, MSS checks the authentication rules for that SSID ...

D-Link DWS-1008 CLI Manual set service-profile beacon Disables or reenables beaconing of the SSID managed by the service profile. An AP radio responds to an 802.11 probe any request with only the beaconed SSID(s). For a nonbeaconed SSID, radios respond only to directed 802.11 probe requests that mat...

D-Link DWS-1008 CLI Manual name none session Defaults: The default CAC mode is none. Access: Enabled. Examples: The following command enables session-based CAC on service profile sp1 : DWS-1008# set service-profile sp1 cac-mode session success: change accepted. See Also: • set service-profile cac-se...

D-Link DWS-1008 CLI Manual Defaults: 104-bit WEP encryption is disabled by default. Access: Enabled. Usage: To use 104-bit WEP with WPA clients, you must also enable the WPA IE. When 104-bit WEP in WPA is enabled in the service profile, radios managed by a radio profile that is mapped to the service...

D-Link DWS-1008 CLI Manual Defaults: 40-bit WEP encryption is disabled by default. Access: Enabled. Usage: To use 40-bit WEP with WPA clients, you must also enable the WPA IE. When 40-bit WEP in WPA is enabled in the service profile, radios managed by a radio profile that is mapped to the service pr...

D-Link DWS-1008 CLI Manual 8 Usage: This command applies only when static CoS is enabled. If static CoS is disabled, prioritization is based on the QoS mode configured in the radio profile, and on any ACLs that set CoS. To enable static CoS, use the set service-profile static-cos command. Examples: ...

D-Link DWS-1008 CLI Manual 0 name enable disable Defaults: This option is disabled by default. Access: Enabled. Usage: Even when this option is enabled, the DWS-1008 to which a user roams (the roamed-to switch) can reassign the VLAN in any of the following cases: Examples: The following command enab...

D-Link DWS-1008 CLI Manual Defaults: Proxy ARP is disabled by default. Access: Enabled. Usage: To further reduce broadcast traffic on a service profile, use the set service-profile no-broadcast command to disable DHCP and ARP request broadcasts. Examples: The following command enables proxy ARP on s...

D-Link DWS-1008 CLI Manual Examples: The following command configures service profile sp3 to use passphrase “1234567890123<>?=+&% The quick brown fox jumps over the lazy sl”: DWS-1008# set service-profile sp3 psk-phrase “1234567890123<>?=+&% The quick brown fox jumps over the laz...

D-Link DWS-1008 CLI Manual name threshold Defaults: The default short unicast retry threshold is 5 attempts. Access: Enabled. Examples: The following command changes the short retry threshold for service profile sp1 to 3: DWS-1008# set service-profile sp1 short-retry-count 3 success: change accepted...

D-Link DWS-1008 CLI Manual set service-profile soda failure-page Specifies a page on the DWS-1008 that is loaded when a client fails the security checks performed by the SODA agent. Syntax: set service-profile name soda failure-page page name page Defaults: By default, the DWS-1008 dynamically gener...

D-Link DWS-1008 CLI Manual 80 set service-profile soda logout-page Specifies a page on the DWS-1008 that is loaded when a client logs out of the network by closing the SODA virtual desktop. Syntax: set service-profile name soda logout-page page name page Defaults: None. Access: Enabled. Usage: When ...

D-Link DWS-1008 CLI Manual 81 set service-profile soda mode Enables or disables Sygate On-Demand (SODA) functionality for a service profile. Syntax: set service-profile name soda mode {enable | disable} name enable disable Defaults: Disabled. Access: Enabled. Usage: When SODA functionality is enable...

D-Link DWS-1008 CLI Manual 8 Defaults: Disabled. Access: Enabled. Usage: If the SODA agent checks fail on a client, by default the client is disconnected from the network. Optionally, you can specify a failure page for the client to load (with the set service-profile soda failure-page command). When...

D-Link DWS-1008 CLI Manual 8 Examples: The following command applies the name guest to the SSID managed by service profile clear_wlan : DWS-1008# set service-profile clear_wlan ssid-name guest success: change accepted. The following command applies the name corporate users to the SSID managed by ser...

D-Link DWS-1008 CLI Manual 8 name 11a | 11b | 11g mandantory rate-list disabled rate-list beacon-rate rate multicast-rate { rate | auto} Service profile name. Radio type. Set of data transmission rates that clients are required to support in order to associate with an SSID on an AP. A client must su...

D-Link DWS-1008 CLI Manual 88 Defaults: This command has the following defaults: • mandantory: • 11a - 6.0,12.0,24.0 • 11b - 1.0,2.0 • 11g - 1.0,2.0,5.5,11.0 • disabled - None. All rates applicable to the radio type are supported by default. • beacon-rate: • 11a - 6.0 • 11b - 2.0 • 11g - 2.0 • multi...

D-Link DWS-1008 CLI Manual 1 Note: To use WebAAA, the fallthru authentication type in the service profile that manages the SSID must be set to web-portal. To use WebAAA for a wired authentication port, edit the port configuration with the set port type wired-auth command. The web-portal authenticati...

D-Link DWS-1008 CLI Manual Examples: The following command configures a 5-byte WEP key for key index 1 on service profile sp2 to aabbccddee : DWS-1008# set service-profile sp2 wep key-index 1 key aabbccddee success: change accepted. See Also: • set service-profile wep active-multicast-index • set se...

D-Link DWS-1008 CLI Manual List of ports connected to the DWL-8220AP access point(s) for which to display configuration settings. Number of a Distributed AP for which to display configuration settings. Shows configuration information for radio 1. Shows configuration information for radio 2. (This op...

D-Link DWS-1008 CLI Manual 0 Examples: The following command displays Ethernet statistics for the Ethernet ports on Distributed AP 1: DWS-1008# show dap etherstats 1 DAP: 1 ether: 1 ================================= RxUnicast: 75432 TxGoodFrames: 55210 RxMulticast: 18789 TxSingleColl: 32 RxBroadcast...

D-Link DWS-1008 CLI Manual 08 show {ap | dap} status Displays DWL-8220AP access point and radio status information. Syntax: show ap status [terse] | [ port-list | all [radio {1 | 2}]] Syntax: show dap status [terse] | [ dap-num | all [radio {1 | 2}]] terse port-list dap-num all radio1 radio2 Default...

D-Link DWS-1008 CLI Manual 1 Output for show ap status terse and show dap status terse Field Description Port DWS-1008AP port number connected to the AP. Flg Operational status flags for the AP. For flag definitions, see the key in the command output. IP Address IP address of the AP. The address is ...

D-Link DWS-1008 CLI Manual 1 DWS-1008# show auto-tune attributes ap 2 radio 1 Auto-tune attributes for port 2 radio 1: Noise: -92 Packet Retransmission Count: 0 Utilization: 0 Phy Errors Count: 0 CRC Errors count: 122 The following table describes the fields in the display: See Also: • set {ap | dap...

D-Link DWS-1008 CLI Manual 1 show auto-tune neighbors Displays the other D-Link access point and third-party 802.11 access points that a D-Link access point can hear. Syntax: show auto-tune neighbors [ap mp-num [radio {1 | 2| all}]] Syntax: show auto-tune neighbors [dap dap-num [radio {1 | 2| all}]]...

D-Link DWS-1008 CLI Manual 1 The following table describes the fields in the display: Field Description Channel Channel on which the BSSID is detected. Neighbor BSS/MAC BSSID detected by the radio. RSSI Received signal strength indication (RSSI), in decibels referred to 1 milliwatt (dBm). A higher v...

D-Link DWS-1008 CLI Manual 1 Examples: The following command displays static IP configuration information for Distributed AP 1: DWS-1008# show dap boot-configuration 1 Field Description DAP Distributed AP number. IP Address Whether static IP address assignment is enabled for this Distributed AP. VLA...

D-Link DWS-1008 CLI Manual 1 show dap connection Displays the system IP address of the DWS-1008 that booted a Distributed AP. Syntax: show dap connection [ dap-num | serial-id serial-ID ] dap-num serial-id Defaults: None. Access: Enabled. Usage: The serial-id parameter displays the active connection...

D-Link DWS-1008 CLI Manual 18 show dap global Displays connection information for Distributed APs configured on an DWS-1008. Syntax: show dap global [ dap-num | serial-id serial-ID ] dap-num serial-id Defaults: None. Access: Enabled. Usage: Connections are shown only for the Distributed APs that are...

D-Link DWS-1008 CLI Manual 0 show dap unconfigured Displays Distributed APs that are physically connected to the network but that are not configured on any DWS-1008s. Syntax: show dap unconfigured Defaults: None. Access: Enabled. Usage: This command also displays an AP that is directly connected to ...

D-Link DWS-1008 CLI Manual 1 show radio-profile Displays radio profile information. Syntax: show radio-profile { name | ?} name ? Defaults: None. Access: Enabled. Usage: MSS contains a default radio profile. D-Link recommends that you do not change this profile but instead keep the profile for refer...

D-Link DWS-1008 CLI Manual show service-profile Displays service profile information. Syntax show service-profile { name | ?} name ? Defaults None. Access Enabled. Examples The following command displays information for service profile sp1: DWS-1008# show service-profile sp1 Displays information abo...

D-Link DWS-1008 CLI Manual 8 STP Commands Use Spanning Tree Protocol (STP) commands to configure and manage spanning trees on the virtual LANs (VLANs) configured on a switch, to maintain a loop-free network. This chapter presents STP commands alphabetically. Use the following table to locate command...

D-Link DWS-1008 CLI Manual 0 clear spantree portvlancost Resets to the default value the cost of a network port or ports on paths to the STP root bridge for a specific VLAN on a DWS-1008 switch, or for all VLANs. Syntax: clear spantree portvlancost port-list {all | vlan vlan-id } port-list List of p...

D-Link DWS-1008 CLI Manual 1 Defaults: None. Access: Enabled. Usage: MSS does not change a port’s priority for VLANs other than the one(s) you specify. Examples: The following command resets the STP priority for port 5 in VLAN avocado : DWS-1008# clear spantree portvlanpri 5 vlan avocado success: ch...

D-Link DWS-1008 CLI Manual set spantree Enables or disables STP on one VLAN or all VLANs configured on a DWS-1008 switch. Syntax: set spantree {enable | disable} [{all | vlan vlan-id | port port-list vlan-id }] enable Enables STP. disable Disables STP. all Enables or disables STP on all VLANs. vlan ...

D-Link DWS-1008 CLI Manual Defaults: STP backbone fast path convergence is disabled by default. Access: Enabled. Usage: If you plan to use the backbone fast convergence feature, you must enable it on all the bridges in the spanning tree. Examples: The following command enables backbone fast converge...

D-Link DWS-1008 CLI Manual set spantree hello Changes the interval between STP hello messages sent by a switch when operating as the root bridge, on one or all of its configured VLANs. Syntax: set spantree hello interval {all | vlan vlan-id } interval Interval value. You can specify from 1 through 1...

D-Link DWS-1008 CLI Manual Examples: The following command changes the maximum acceptable age for root bridge hello packets on all VLANs to 15 seconds: DWS-1008# set spantree maxage 15 all success: change accepted. See Also:• show spantree set spantree portcost Changes the cost that transmission thr...

D-Link DWS-1008 CLI Manual set spantree portvlancost Changes the cost of a network port or ports on paths to the STP root bridge for a specific VLAN on an switch. Syntax: set spantree portvlancost port-list cost cost {all | vlan vlan-id } port-list List of ports. MSS applies the cost change to all t...

D-Link DWS-1008 CLI Manual 8 Defaults: The default STP priority for all network ports is 128. Access: Enabled. Examples: The following command sets the priority of ports 3 and 4 to 48 on VLAN mauve : DWS-1008# set spantree portvlanpri 3-4 priority 48 vlan mauve success: change accepted. See Also:• c...

D-Link DWS-1008 CLI Manual set spantree uplinkfast Enables or disables STP uplink fast convergence on a switch. This feature enables a switch with redundant links to the network backbone to immediately switch to the backup link to the root bridge if the primary link fails. Syntax: set spantree uplin...

D-Link DWS-1008 CLI Manual 0 Defaults: None. Access: All. Examples: The following command displays STP information for VLAN default : DWS-1008# show spantree vlan default VLAN 1 Spanning Tree Mode PVST+ Spanning Tree Type IEEE Spanning Tree Enabled Designated Root 00-02-4a-70-49-f7 Designated Root P...

D-Link DWS-1008 CLI Manual show spantree backbonefast Indicates whether the STP backbone fast convergence feature is enabled or disabled. Syntax: show spantree backbonefast Defaults: None. Access: All. Examples: The following example shows the command output on a switch with backbone fast convergenc...

D-Link DWS-1008 CLI Manual show spantree portfast Displays STP uplink fast convergence information for all network ports or for one or more network ports. Syntax: show spantree portfast [ port-list ] port-list List of ports. If you do not specify any ports, MSS displays uplink fast convergence infor...

D-Link DWS-1008 CLI Manual show spantree portvlancost Displays the cost of a port on a path to the STP root bridge, for each of the port’s VLANs. Syntax: show spantree portvlancost port-list port-list List of ports. Defaults: None. Access: All. Examples: The following command shows the STP port cost...

D-Link DWS-1008 CLI Manual 8 Field Description bridge forward delay Value of the forwarding delay interval, in seconds, when this switch is the root or is attempting to become the root. topology change initiator Port number that initiated the most recent topology change. last topology change occurre...

D-Link DWS-1008 CLI Manual 0 IGMP Snooping Commands Use Internet Group Management Protocol (IGMP) snooping commands to configure and manage multicast traffic reduction on a switch. This chapter presents IGMP snooping commands alphabetically. Use the following table to locate commands in this chapter...

D-Link DWS-1008 CLI Manual 1 clear igmp statistics Clears IGMP statistics counters on one VLAN or all VLANs on a switch and resets them to 0. Syntax: clear igmp statistics [vlan vlan-id ] vlan vlan-id VLAN name or number. If you do not specify a VLAN, IGMP statistics are cleared for all VLANs. Defau...

D-Link DWS-1008 CLI Manual Defaults: By default, no ports are static multicast router ports. Access: Enabled. Usage: You cannot add AP access ports or wired authentication ports as static multicast ports. However, MSS can dynamically add these port types to the list of multicast ports based on multi...

D-Link DWS-1008 CLI Manual set igmp mrsol mrsi Changes the interval between multicast router solicitations by a switch on one VLAN or all VLANs. Syntax: set igmp mrsol mrsi seconds [vlan vlan-id ] seconds Number of seconds between multicast router solicitations. You can specify a value from 1 throug...

D-Link DWS-1008 CLI Manual Examples: The following command changes the other-querier-present interval on VLAN orange to 200 seconds: DWS-1008# set igmp oqi 200 vlan orange success: change accepted. See Also:• set igmp lmqi• set igmp qi• set igmp qri• set igmp querier• set igmp mrouter• set igmp rv s...

D-Link DWS-1008 CLI Manual set igmp qi Changes the IGMP query interval timer on one VLAN or all VLANs on a switch. Syntax: set igmp qi seconds [vlan vlan-id ] qi seconds Number of seconds that elapse between general queries sent by the switch when the switch is the querier for the subnet. You can sp...

D-Link DWS-1008 CLI Manual set igmp qri Changes the IGMP query response interval timer on one VLAN or all VLANs on a switch. Syntax: set igmp qri tenth-seconds [vlan vlan-id ] qri tenth-seconds Amount of time (in tenths of a second) that the switch waits for a receiver to respond to a group-specific...

D-Link DWS-1008 CLI Manual Usage: You cannot add AP access ports or wired authentication ports as static multicast ports. However, MSS can dynamically add these port types to the list of multicast ports based on multicast traffic. Examples: The following command adds port 7 as a static multicast rec...

D-Link DWS-1008 CLI Manual 0 show igmp Displays IGMP configuration information and statistics for one VLAN or all VLANs. Syntax: show igmp [vlan vlan-id] vlan vlan-id VLAN name or number. If you do not specify a VLAN, MSS displays IGMP information for all VLANs. Defaults: None. Access: All. Examples...

D-Link DWS-1008 CLI Manual Field Description TTL Number of seconds before this entry ages out if not refreshed. For static multicast router entries, the time-to-live (TTL) value is undef. Static multicast router entries do not age out. Group IP address of a multicast group. The show igmp receiver-ta...

D-Link DWS-1008 CLI Manual show igmp querier Displays information about the active multicast querier, on one VLAN or all VLANs. Queriers are listed separately for each VLAN. Each VLAN can have only one querier. Syntax: show igmp querier [vlan vlan-id ] vlan vlan-id VLAN name or number. If you do not...

D-Link DWS-1008 CLI Manual The table below describes the fields in the display when a querier other than the switch is present. Field Description Querier for vlan VLAN containing the querier. Information is listed separately for each VLAN. Querier-IP IP address of the querier interface. Querier-MAC ...

D-Link DWS-1008 CLI Manual The following command lists all receivers for multicast groups 237.255.255.1 through 237.255.255.255, in all VLANs: DWS-1008# show igmp receiver-table group 237.255.255.0/24 VLAN: red Session Port Receiver-IP Receiver-MAC TTL -----------------------------------------------...

D-Link DWS-1008 CLI Manual Examples: The following command displays IGMP statistics for VLAN orange : DWS-1008# show igmp statistics vlan orange IGMP statistics for vlan orange: IGMP message type Received Transmitted Dropped ---------------------------------------------------------------------------...

D-Link DWS-1008 CLI Manual Security ACL Commands Use security ACL commands to configure and monitor security access control lists (ACLs). Security ACLs filter packets to restrict or permit network usage by certain users or traffic types, and can assign to packets a class of service (CoS) to define t...

D-Link DWS-1008 CLI Manual 0 clear security acl Clears a specified security ACL, an access control entry (ACE), or all security ACLs, from the edit buffer. When used with the command commit security acl, clears the ACE from the running configuration. Syntax: clear security acl { acl-name | all} [ ed...

D-Link DWS-1008 CLI Manual 1 DWS-1008# show security acl info all ACL information for all set security acl ip acl_134 (hits #3 0) --------------------------------------------------------- 1. permit IP source IP 192.168.0.1 0.0.0.0 destination IP any enable-hits set security acl ip acl_135 (hits #2 0...

D-Link DWS-1008 CLI Manual in Removes the security ACL from traffic coming into the switch. out Removes the security ACL from traffic going out of the switch. Defaults: None. Access: Enabled. Usage: To clear a security ACL map, type the name of the ACL with the VLAN, physical port or ports, virtual ...

D-Link DWS-1008 CLI Manual Defaults: None. Access: Enabled. Usage: Use the commit security acl command to save security ACLs into, or delete them from, the permanent configuration. Until you commit the creation or deletion of a security ACL, it is stored in an edit buffer and is not enforced. After ...

D-Link DWS-1008 CLI Manual rollback security acl Clears changes made to the security ACL edit buffer since it was last saved. The ACL is rolled back to its state after the last commit security acl command was entered. All uncommitted ACLs in the edit buffer are cleared. Syntax: rollback security acl...

D-Link DWS-1008 CLI Manual set security acl In the edit buffer, creates a security access control list (ACL), adds one access control entry (ACE) to a security ACL, and/or reorders ACEs in the ACL. The ACEs in an ACL filter IP packets by source IP address, a Layer 4 protocol, or IP, ICMP, TCP, or UD...

D-Link DWS-1008 CLI Manual acl-name Security ACL name. ACL names must be unique within the switch, must start with a letter, and are case-insensitive. Specify an ACL name of up to 32 of the following characters: • Letters a through z and A through Z• Numbers 0 through 9• Hyphen (-), underscore (_), ...

D-Link DWS-1008 CLI Manual 8 dscp codepoint Filters packets by Differentiated Services Code Point (DSCP) value. You can specify a number from 0 to 63, in decimal or binary format. Note: You cannot use the dscp option along with the precedence and tos options in the same ACE. The CLI rejects an ACE t...

D-Link DWS-1008 CLI Manual The following command creates acl_125 by defining an ACE that denies TCP packets from source IP address 192.168.0.1 to destination IP address 192.168.0.2 for established sessions only, and counts the hits: DWS-1008# set security acl ip acl_125 deny tcp 192.168.0.1 0.0.0.0 ...

D-Link DWS-1008 CLI Manual 80 tag tag-list One or more values that identify a virtual port in a VLAN. Specify a single tag value from 1 through 4095. Or specify a comma-separated list of values, a hyphen-separated range, or any combination, with no spaces. MSS assigns the security ACL to the specifi...

D-Link DWS-1008 CLI Manual 81 set security acl hit-sample-rate Specifies the time interval, in seconds, at which the packet counter for each security ACL is sampled for display. The counter counts the number of packets filtered by the security ACL—or “hits.” Syntax: set security acl hit-sample-rate ...

D-Link DWS-1008 CLI Manual 8 show security acl Displays a summary of the security ACLs that are mapped. Syntax: show security acl Defaults: None. Access: Enabled. Usage: This command lists only the ACLs that have been mapped to something (a user, or VLAN, or port, and so on). To list all committed A...

D-Link DWS-1008 CLI Manual 8 show security acl editbuffer Displays a summary of the security ACLs that have not yet been committed to the configuration. Syntax: show security acl [info all] editbuffer info all Displays the ACEs in each uncommitted ACL. Without this option, only the ACE names are lis...

D-Link DWS-1008 CLI Manual 8 show security acl hits Displays the number of packets filtered by security ACLs (“hits”) on the switch. Each time a packet is filtered by a security ACL, the hit counter increments. Syntax: show security acl hits Defaults: None. Access: Enabled. Usage: For MSS to count h...

D-Link DWS-1008 CLI Manual 8 Defaults: None. Access: Enabled. Examples: To display the contents of all security ACLs committed on a switch, type the following command: DWS-1008# show security acl info ACL information for all set security acl ip acl_123 (hits #5 462) ---------------------------------...

D-Link DWS-1008 CLI Manual 8 show security acl map Displays the VLANs, ports, and virtual ports on the switch to which a security ACL is assigned. Syntax: show security acl map acl-name acl-name Name of an existing security ACL for which to show static mapping. ACL names must start with a letter and...

D-Link DWS-1008 CLI Manual 8 Examples To display security ACL resource usage, type the following command: DWS-1008# show security acl resource-usage ACL resources Classifier tree counters ------------------------------- Number of rules: 2 Number of leaf nodes: 1 Stored rule count: 2 Leaf chain count...

D-Link DWS-1008 CLI Manual 0 Trace Commands Use trace commands to perform diagnostic routines. While MSS allows you to run many types of traces, this chapter describes commands for those traces you are most likely to use. For a complete listing of the types of traces MSS allows, type the set trace ?...

D-Link DWS-1008 CLI Manual 1 clear trace Deletes running trace commands and ends trace processes. Syntax: clear trace { trace-area | all} trace-area Ends a particular trace process. Specify one of the following keywords to end the traces documented in this chapter: • authorization—Ends an authorizat...

D-Link DWS-1008 CLI Manual save trace Saves the accumulated trace data for enabled traces to a file in the switch’s nonvolatile storage. Syntax: save trace filename filename Name for the trace file. To save the file in a subdirectory, specify the subdirectory name, then a slash. For example: traces/...

D-Link DWS-1008 CLI Manual set trace authorization Traces authorization information. Syntax: set trace authorization [mac-addr mac-address ] [port port-num ] [user username ] [level level ] mac-addr mac-address Traces a MAC address. Specify a MAC address, using colons to separate the octets (for exa...

D-Link DWS-1008 CLI Manual port port-num Traces a port number. Specify a port number between 1 and 22. user username Traces a user. Specify a username of up to 80 alphanumeric characters with no spaces. level level Determines the quantity of information included in the output. You can set the level ...

D-Link DWS-1008 CLI Manual Defaults: The default trace level is 5. Access: Enabled. Examples: Type the following command to trace session manager activity for MAC address 00:01:02:03:04:05: DWS-1008# set trace sm mac-addr 00:01:02:03:04:05: success: change accepted. See Also:• clear trace• show trac...

D-Link DWS-1008 CLI Manual Snoop Commands Use snoop commands to monitor wireless traffic, by using a Distributed AP as a sniffing device. The AP copies the sniffed 802.11 packets and sends the copies to an observer, which is typically a protocol analyzer such as Ethereal or Tethereal. This chapter p...

D-Link DWS-1008 CLI Manual clear snoop map Removes a snoop filter from an AP radio. Examples: clear snoop map filter-name dap dap-num radio {1 | 2} filter-name Name of the snoop filter. dap dap-num Number of a Distributed AP to which to snoop filter is mapped. radio 1 Radio 1 of the AP. radio 2 Radi...

D-Link DWS-1008 CLI Manual 8 condition-list Match criteria for packets. Conditions in the list are ANDed. Therefore, to be copied and sent to an observer, a packet must match all criteria in the condition-list . You can specify up to eight of the following conditions in a filter, in any order or com...

D-Link DWS-1008 CLI Manual 00 set snoop map Maps a snoop filter to a radio on a Distributed AP. A snoop filter does take effect until you map it to a radio and enable the filter. Examples: set snoop map filter-name dap dap-num radio {1 | 2} filter-name Name of the snoop filter. dap dap-num Number of...

D-Link DWS-1008 CLI Manual 01 set snoop mode Enables a snoop filter. A snoop filter does not take effect until you map it to an AP radio and enable the filter. Examples: set snoop { filter-name | all} mode {enable [stop-after num-pkts ] | disable} {filter-name | all} Name of the snoop filter. Specif...

D-Link DWS-1008 CLI Manual 0 show snoop Displays the AP radio mapping for all snoop filters. Syntax: show snoop Defaults: None. Access: Enabled. Usage: To display the mappings for a specific AP radio, use the show snoop map command. Examples: The following command shows the AP radio mappings for all...

D-Link DWS-1008 CLI Manual 0 System Log Commands Use the system log commands to record information for monitoring and troubleshooting. MSS system logs are based on RFC 3164, which defines the log protocol. This chapter presents system log commands alphabetically. Use the following table to locate co...

D-Link DWS-1008 CLI Manual 0 set log Enables or disables logging of DWS-1008 and AP events to the log buffer or other logging destination and sets the level of the events logged. For logging to a syslog server only, you can also set the facility logged. Syntax: set log {buffer | console | current | ...

D-Link DWS-1008 CLI Manual 0 local-facility facility-level For messages sent to a syslog server, maps all messages of the severity you specify to one of the standard local log facilities defined in RFC 3164. You can specify one of the following values: • 0—maps all messages to local0.• 1—maps all me...

D-Link DWS-1008 CLI Manual 08 set log mark Configures MSS to generate mark messages at regular intervals. The mark messages indicate the current system time and date. D-Link can use the mark messages to determine the approximate time when a system restart or other event causing a system outage occur...

D-Link DWS-1008 CLI Manual 0 show log buffer Displays system information stored in the nonvolatile log buffer or the trace buffer. Syntax: show log buffer [{ +|- } number-of-messages ] [facility facility-name ] [matching string ] [severity severity-level ] buffer Displays the log messages in nonvola...

D-Link DWS-1008 CLI Manual 10 Usage: The debug level produces a lot of messages, many of which can appear to be somewhat cryptic. Debug messages are used primarily by D-Link for troubleshooting and are not intended for administrator use. Examples: Type the following command to see the facilities for...

D-Link DWS-1008 CLI Manual 11 show log trace Displays system information stored in the nonvolatile log buffer or the trace buffer. Syntax: show log trace [{ +|-|/ } number-of-messages ] [facility facility-name ] [matching string ] [severity severity-level ] trace Displays the log messages in the tra...

D-Link DWS-1008 CLI Manual 1 Boot Prompt Commands Boot prompt commands enable you to perform basic tasks, including booting a system image file, from the boot prompt (boot>). A CLI session enters the boot prompt if MSS does not boot successfully or you intentionally interrupt the boot process. To...

D-Link DWS-1008 CLI Manual 1 autoboot Displays or changes the state of the autoboot option. The autoboot option controls whether a DWS-1008 switch automatically boots a system image after initializing the hardware, following a system reset or power cycle. Syntax: autoboot [ON | on | OFF | off] ON En...

D-Link DWS-1008 CLI Manual 1 HA= ip-addr Host address (IP address) of a TFTP server. This parameter applies only when the boot type is n (network). FL= num Number representing the bit settings of boot flags to pass to the booted system image. Use this parameter only if advised to do so by D-Link. OP...

D-Link DWS-1008 CLI Manual 1 change Changes parameters in the currently active boot profile. Syntax: change Defaults: The default boot type is c (compact flash). The default filename is default. The default flags setting is 0x00000000 (all flags disabled) and the default options list is run=nos;boot...

D-Link DWS-1008 CLI Manual 1 create Creates a new boot profile. Syntax: create Defaults: The new boot profile has the same settings as the currently active boot profile by default. Access: Boot prompt. Usage: A DWS-1008 switch can have up to four boot profiles. The boot profiles are stored in slots,...

D-Link DWS-1008 CLI Manual 18 delete Removes the currently active boot profile. Syntax: delete Defaults: None. Access: Boot prompt. Usage: When you type the delete command, the next-lower numbered boot profile becomes the active profile. For example, if the currently active profile is number 3, prof...

D-Link DWS-1008 CLI Manual 1 Defaults: The DHCP option is disabled by default. Access: Boot prompt. Examples: The following command displays the current setting of the DHCP option: boot> dhcp DHCP is currently enabled. The following command disables the DHCP option: boot> dhcp DHCP is currentl...

D-Link DWS-1008 CLI Manual 0 Defaults: None. Access: Boot prompt. Usage: To display the system image software versions, use the fver command. This command does not list the boot code versions. To display the boot code versions, use the version command. Examples: The following command displays all th...

D-Link DWS-1008 CLI Manual 1 Examples: The following command displays the system image version installed in boot partition 1: boot> fver boot1 File boot1:default version is 1.1.0.98. See Also:• dir• version help Displays a list of all the boot prompt commands or detailed information for an indivi...

D-Link DWS-1008 CLI Manual ls Displays a list of the boot prompt commands. Syntax: ls Defaults: None. Access: Boot prompt. Usage: To display help for an individual command, type help followed by the command name (for example, help boot). Examples: To display a list of the commands available at the b...

D-Link DWS-1008 CLI Manual next Activates and displays the boot profile in the next boot profile slot. Syntax: next Defaults: None. Access: Boot prompt. Usage: A DWS-1008 switch contains 4 boot profile slots, numbered 0 through 3. This command activates the boot profile in the next slot, in ascendin...

D-Link DWS-1008 CLI Manual reset Resets a DWS-1008 switch’s hardware. Syntax: reset Defaults: None. Access: Boot prompt. Usage: After resetting the hardware, the reset command attempts to load a system image file only if other boot settings are configured to do so. Examples: To immediately reset the...

D-Link DWS-1008 CLI Manual show Displays the currently active boot profile. A boot profile is a set of parameters that a switch uses to control the boot process. Each boot profile contains the following parameters: • Boot type—Either compact flash (local device on the switch) or network (TFTP) • Boo...

D-Link DWS-1008 CLI Manual test Displays or changes the state of the poweron test flag. The poweron test flag controls whether an performs a set of self tests prior to the boot process. Syntax: test [ON | on | OFF | off] ON Enables the poweron test flag. on Same effect as ON. OFF Disables the powero...