D-Link DWL-810+ - Manuals

6 Connections Reset Button – press this button to revert to the factory default settings of the DWL-810+ Power Receptor – connect one end of the 5V DC Power Adapter (included) to the power receptor on the DWL-810+ and connect the other end of the Power Adapter to a power outlet. Default Settings Ope...

7 3. Wireless Basics With the DWL-810+ you can provide instant wireless access to the LAN (Local Area Network) for Ethernet-enabled devices. With an Ethernet (CAT5) cable simply connect the DWL-810+ to the Ethernet port of a network device (such as a printer or web camera) to establish a wireless co...

8 Wireless Basics People use WLAN technology for many different purposes. Mobility - Productivity increases when people have access to data in any location within the operating range of the WLAN. Management decisions based on real-time information can significantly improve worker efficiency. Low Imp...

9 Wireless Basics The DWL-810+ is also compatible with the following D-Link AirPlus family of products: DWL-650+ Enhanced 2.4GHz Wireless Cardbus Adapter for laptop PCs DWL-520+ Enhanced 2.4GHz Wireless PCI card for desktop PCs DWL-900AP+ Wireless Access Point DI-614+ Wireless Router Standards - Bas...

10 Wireless Basics meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position Access Points and Adapters so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better recepti...

11 Getting Started Setup #2 DWL-810+ Setup #2: This example illustrates an Infrastructure setup. To connect the DWL-810+ to a wireless network with a wireless router or access point, please refer to the printed Quick Installation Guide included with the product. Web configuration is required to conn...

12 5. Web Configuration Before using the Web Configuration for the DWL-810+, please consider the following: Factory Default Settings for the DWL-810+ Operating Mode Infrastructure SSID default Channel 6 Transmission rates Auto Encryption No Administrator password Blank (no password needed) IP Addres...

13 Configuration Menu Whenever you want to configure your network or the DWL-810+, you can access the Configuration Utility by opening the web-browser and typing in the IP Address of the DWL-810+. The DWL-810+ default IP Address is shown below: (The IP Address shown in the example above is the defau...

14 Configuration Menu Operating Mode: Select Ad-hoc or Infrastructure. Infrastructure is the default setting. AP Name: You may choose to rename your DWL-810+, especially if you have more than one Access Point on your network. SSID: ( Service Set Identifier ) default is the default setting. The SSID ...

16 Configuration Menu Admin Administrator Settings: Change your password in this window. Re-enter the new password to confirm. It can be up to 14 characters in length.Please keep a copy of your password in a safe place. Click Apply , if you have made any changes. System Settings: The current system ...

17 Configuration Menu Help The Help window displays information about each window in the Configuration menu. When you change the settings in the Configuration menu, you will need to restart the DWL-810+ for the changes to take effect.

18 6. Troubleshooting This section provides solutions to situations that can occur during the installation and operation of the DWL-810+ Ethernet-to-Wireless Bridge. Read the following descriptions if you are having problems. 1. How do I assign a Static IP Address in Windows XP/2000? Please note tha...

21 How do I assign a Static IP Address in Macintosh OSX? (continued) • Select Built-in Ethernet in the Show pull-down menu • Select Manually in the Configure pull-down menu. • Input the Static IP Address, the Subnet Mask and the Router IP Address in the appropriate fields. • Click Apply Now 3. The D...

22 Advanced Setup (optional) For advanced setup features, enter http://192.168.0.30 into your Internet browser and gain access to the web configuration of the DWL-810+. The advanced setup features can be used to change the LAN and wireless settings for your DWL-810+ Ethernet-to-Wireless Bridge. 5. I...

24 • If you are using 2.4GHz cordless phones, X-10 equipment or other home security systems, ceiling fans, and lights, your wireless connection will degrade dramatically or drop altogether. Try changing the Channel on your Router, Access Point and all other devices on the network to avoid interferen...

25 • Outdoors – Up to 1,312 ft. (400m)* *Environmental factors may adversely affect range Modulation Technology: • PBCC – Packet Binary Convolutional Coding • DSSS – Direct Sequence Spread Spectrum • 11-chip Barker sequence Modulation Techniques: • PBCC (22Mbps/8.5db) • PBCC (11Mbps/4.5db) • CCK (11...

26 Safety & Emissions: • FCC • UL Dimensions: • L=3.5 inches (90mm) • W=3.2 inches (82mm) • H=1.6 inches (40mm) Weight: • 0.34 lbs (153g) Warranty: • 3 Year 9. Contacting Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free te...

27 10. Warranty and Registration Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product from: D-Link or its authorized reseller or distributor and Products...