D-Link DWL-2210AP - Manuals

Page 2 - Connecting Power Directly to the DWL-2210AP; receptor; on the back panel of the; Ethernet Broadband; Air

2 Connecting the DWL-2210AP to YourNetwork There are two methods of powering the DWL-2210AP. The power adapter can plug directlyinto the unit or plug into the PoE (Power over Ethernet) base unit. To connect powerdirectly to the DWL-2210AP, please follow the steps on this page. To use the PoE baseuni...

Page 3 - LAN port; on the DWL-2210AP and the other end of the Ethernet cable to the port; DATA IN; port on the PoE base unit; POWER IN; on the PoE

3 Connecting the DWL-2210AP to YourNetwork (continued) Connecting PoE (Power over Ethernet) to the DWL-2210AP • Step 1 : Connect one end of an Ethernet cable (included with your package) to the LAN port on the DWL-2210AP and the other end of the Ethernet cable to the port labeled P+DATA OUT on the P...

Page 6 - Click; on; KickStart

6 The KickStart Wizard is used to discover and identify DWL-2210AP Access Pointson a network with a DHCP server. KickStart will not discover any other devices. If your network does not have a DHCP server, please skip to Section 3 on page 9. Using the KickStart Wizard on a Networkwith a DHCP Server C...

Page 7 - in the User

7 Click Administration Console KickStart will display theAccess Point(s) on yourn e t w o r k . I f n e c e s s a r y,click Back to rescan thenetwork. Click Next Click OK The DWL-2210AP loginscreen will appear. Type admin in the User name and Password fields. Using the KickStart Wizard on a Networkw...

Page 9 - Highlight; I P a d d r e s s o f

9 Using a Static IP Address to Connect tothe DWL-2210AP To assign a Static IP Address on the computer that you are using to configure theDWL-2210AP, follow the steps for the appropriate operating system: Windows XP: Go to Start , click on Control Panel double-click on Network Connections , right-cli...

Page 10 - Go to; on the

10 Go to Start > Settings > Network and Dial- up Connections . Double-click on the Local A r e a C o n n e c t i o n a s s o c i a t e d w i t h t h e Network Adapter installed on your system andselect Properties . Click Properties Click Internet Protocol (TCP/IP) Select Use the following IP a...

Page 13 - in the user; Type; in

13 Using a Static IP Address to Connect tothe DWL-2210AP Click OK The DWL-2210AP loginscreen will appear. Type admin in the user name and password fields. Type http://192.168.0.50 in the address bar and hitEnter or Return. O p e n u p y o u r W e bbrowser.

Page 15 - Under Connection Type,; Select

15 Please refer to the user manual located on the CD-ROM for additional detailson configuring the DWL-2210AP. Using a Static IP Address to Connect tothe DWL-2210AP Under Connection Type, Select Static IP Enter a Static IP Address , Subnet Mask , and Default Gateway . The DWL-2210AP defaults to a sta...

Page 16 - Tech Support for customers within the United States:; Tech Support for customers within Canada:; D-Link Technical Support over the Telephone:

T TT TTechni echni echni echni echnical Support cal Support cal Support cal Support cal Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States andwithin Canada for the duration of the warranty ...