D-Link DVG-G5402SP - Manuals

Page 2 - Trademarks; and the; FCC Warning; Reorient or relocate the receiving antenna.; CE Mark Warning

© 2007 D-Link Corporation. All rights reserved. Reproduction in any manner whatsoever without the written permission of D-Link Corporation is strictly forbidden. Trademarks used in this text: D-Link and the D-Link logo are trademarks of D-Link Corporation/D-Link Systems Inc.; Other trademarks and tr...

Page 3 - Contents

Contents 1. Introduction ........................................................................................................................................................ 4 1-1 Product Overview ......................................................................................................

Page 4 - -1 Product Overview

DVG-G5402SP User’s Manual Product Overview D-Link Systems, Inc. 4 1. Introduction 1-1 Product Overview The DVG-G5402SP is designed to carry both voice and facsimile over the IP network and wirelessly share Internet access. It uses the industry standard SIP call control protocol so as to be compatibl...

Page 5 - -2 Hardware Description; Front Panel; The LED will turn off if not connected to a service provider.

DVG-G5402SP User’s Manual Telephone Interface Description D-Link Systems, Inc. 5 1-2 Hardware Description Front Panel Power: Power LED. A steady light indicates a proper connection to a power source. Prov./Alm.: A blinking light indicates the VoIP Router is attempting to connect with the Provisionin...

Page 6 - Rear Panel; Connect to your broadband modem using an Ethernet cable.; DO NOT

DVG-G5402SP User’s Manual Telephone Interface Description D-Link Systems, Inc. 6 Rear Panel 1. Line: Connect to your original telephone line on the wall jack with RJ-11 cable. 2. Phone Port (1-2): Connect to your phones using standard phone cabling (RJ-11). 3. LAN: Connect to your Ethernet enabled c...

Page 7 - SETUP; Open your Web browser and type; Login; to enter Web Site. The factory; Password; Click; Setup Wizard

DVG-G5402SP User’s Manual SETUP D-Link Systems, Inc. 7 2. Getting Started To access the web-based configuration utility, open a web browser such as Internet Explorer and enter the IP address of the DVG-G5402SP. Open your Web browser and type http://192.168.8.254 into the URL address box. Press the E...

Page 11 - Select DHCP WAN Setup.

DVG-G5402SP User’s Manual SETUP D-Link Systems, Inc. 11 3. VoIP Router Web Configuration (continued) During configuration, please follow the Setup Hint for some specific procedure in case the VoIP Router fails to make the changes active. Situation 1: (example: Internet Setup) Setup Hint: 1. Select D...

Page 12 - Click “Apply” after settings.

DVG-G5402SP User’s Manual SETUP D-Link Systems, Inc. 12 2. Click “Apply” after settings. 3. Go to “MAINTAINACE”-> “Backup and Restore” save settings and reboot the system.

Page 13 - Click “Enable IP Filtering” check box to open the main screen.

DVG-G5402SP User’s Manual SETUP D-Link Systems, Inc. 13 Situation 3: (example: Enable IP Filtering) Setup Hint: 1. Click “Enable IP Filtering” check box to open the main screen. 2. Click “Add” to enter an entry. 3. After Adding an entry, you have to click “Apply”. 4. Don’t forget to click “Apply” wh...

Page 20 - Each line registers to Proxy independently:; Check the box to register with SIP proxy server.

DVG-G5402SP User’s Manual SETUP D-Link Systems, Inc. 20 SETUP → VoIP Setup Each line registers to Proxy independently: Number: Enter the number, text or number and text in this field. It is the Caller ID for the called party when you make a VoIP call. If you register the VoIP Router to a SIP proxy s...

Page 23 - Digit Map

DVG-G5402SP User’s Manual SETUP D-Link Systems, Inc. 23 SETUP → VoIP Setup The rule of dialing of inviting to VoIP Service Providers may vary. That is, you have to configure different Digit Map for different ITSP. In this filed, you can configure individual Digit Map for each Proxy Server. The follo...

Page 24 - If Server 1 is local ITSP, you can refer to; page for general settings.; If Server 3 is ITSP in UK, you can set individual Digit Map in; Number Translation

DVG-G5402SP User’s Manual SETUP D-Link Systems, Inc. 24 For example (Example in Taiwan) , If Server 1 is local ITSP, you can refer to Digit Map page for general settings. If Server 2 is global ITSP (VoIP STUN, free to dial to some cities free charge) you can set individual Digit Map in Number Transl...

Page 25 - Every device in the same wireless network must use the same SSID.; Enable Wireless LAN Interface:; Enable wireless basic settings on LAN interface.

DVG-G5402SP User’s Manual SETUP D-Link Systems, Inc. 25 3-1-3 Wireless Setup This section instructs you how to setup your wireless network on the VoIP Router device. Setup Hint: 1. Every device in the same wireless network must use the same SSID. 2. To avoid wireless network overlap, a specific and ...

Page 27 - You can select one of the keys as active key at a time.

DVG-G5402SP User’s Manual SETUP D-Link Systems, Inc. 27 SETUP -> Wireless Setup -> Wireless Security (WEP) WEP Key Length: Select 64-bit or 128-bit data encryption. Default Tx Key: You can select one of the keys as active key at a time. WEP Key Format: Select the preferred WEP Key Format accor...

Page 28 - Select

DVG-G5402SP User’s Manual SETUP D-Link Systems, Inc. 28 WPA Authentication Mode The wireless network can use WPA Authentication to verify whether a wireless device is allowed to access your Access Point or not. You can choose to use Enterprise (RADIUS) method or Personal (Pre-Shared Key). The encryp...

Page 33 - ADVANCED

DVG-G5402SP User’s Manual ADVANCED D-Link Systems, Inc. 33 3-2 ADVANCED 3-2-1 VoIP 3-2-1-1 Caller Filter This function allows you to accept or reject any incoming call from the IP address listed in the filter rule. The call from the IP address of SIP proxy server is always accepted, despite Deny is ...

Page 36 - will play a hold music (provided by your ITSP or VSP) to the remote end.; Examples of establishing a Three-Way call:; Or; Phone1 dials to Phone2, Phone2 answers the call.

DVG-G5402SP User’s Manual ADVANCED D-Link Systems, Inc. 36 Calling Feature Instructions: Call Hold: The call will be held after the FLASH button is pressed on the phone set. The VoIP Router will play a hold music (provided by your ITSP or VSP) to the remote end. Call Transfer: The call will be held ...

Page 37 - VoIP; Preferred Codec Type:; Enter the jitter of receiving packets.; Approximate Bandwidth Required:; It shows the bandwidth required from different codec and packet

DVG-G5402SP User’s Manual ADVANCED D-Link Systems, Inc. 37 3-2-1-4 Codec ADVANCED → VoIP → Codec Preferred Codec Type: Select a preferred codec type for all calls. Since different voice codecs have different compression ratios, the sound quality and occupied bandwidths are also different. The factua...

Page 38 - FXS Ring Cadence Settings:

DVG-G5402SP User’s Manual ADVANCED D-Link Systems, Inc. 38 ADVANCED → VoIP → CPT / Cadence CPT # 1 Enable Setting 1: The CPT has a set of parameter table. Please adjust the CPT based on the local PSTN or PBX settings and requirements. ADVANCED → VoIP → CPT / Cadence FXS Ring Cadence Settings: Specif...

Page 42 - User Dial Length: Disable; Scan Code; column and enter the desired name into the

DVG-G5402SP User’s Manual ADVANCED D-Link Systems, Inc. 42 For example , Scan Code: 0% VoIP Dial-out: 1805% User Dial Length: Disable Route: VoIP VoIP Route Profile: Route # 3 Pick up the handset and dial 0423456789. The VoIP Router will dial 1805423456789 and go through Internet first and follow Ro...

Page 46 - VoIP Call Allow PSTN In:; to allow a waiting call from PSTN.; Call Hold; Feature

DVG-G5402SP User’s Manual ADVANCED D-Link Systems, Inc. 46 3-2-1-9 Hot Line ADVANCED → VoIP → Hot Line Hot Line: Check to direct the call automatically to a pre-configured destination without any action when the FXS is off-hook. (ie. as the user picks up the phone). When the FXS is under Hot Line mo...

Page 47 - Enable Polarity Reversal:

DVG-G5402SP User’s Manual ADVANCED D-Link Systems, Inc. 47 3-2-1-10 Line ADVANCED → VoIP → Line Enable: Tick the check box to enable a line. If some lines are not used, disable them (Pause Function) to avoid unnecessary waiting when an incoming call is diverting to the line. Listening Volume: Use th...

Page 56 - Enable MAC Filtering:; Check the box to deny from accessing Internet.

DVG-G5402SP User’s Manual ADVANCED D-Link Systems, Inc. 56 3-2-2 Access Control 3-2-2-1 MAC Filtering Use MAC Filters to deny computers within the local area network from accessing the Internet. You can either manually add a MAC address that are connected to the VoIP Router. ADVANCED → Access Contro...

Page 57 - Firewall and DMZ

DVG-G5402SP User’s Manual ADVANCED D-Link Systems, Inc. 57 3-2-3 Firewall and DMZ 3-2-3-1 DMZ DMZ (Demilitarized Zone) allows the server on the LAN site to be directly exposed to the Internet for accessing data and to forward all incoming ports to the DMZ Host. Adding a client to the DMZ may expose ...

Page 63 - Select the type of authentication.

DVG-G5402SP User’s Manual ADVANCED D-Link Systems, Inc. 63 This section introduces advanced configuration for the wireless access point. If you are not familiar with the following functions, keep the default parameters. In some cases, incorrect settings may reduce wireless performance. ADVANCED ->...

Page 64 - The default value is; Long Preamble

DVG-G5402SP User’s Manual ADVANCED D-Link Systems, Inc. 64 RTS Threshold: RTS Threshold is a mechanism to implement in collision avoidance. In a large wireless network, two stations do not hear each other but can hear wireless access point. When the two send data to Access Point at the same time, it...

Page 65 - configuration changes on this page.; Allow Listed; Access Control List have rights to connect to your Access Point.; Deny Listed; The space is reserved for comment or notation.

DVG-G5402SP User’s Manual ADVANCED D-Link Systems, Inc. 65 3-2-4-2 Access Control The Access Control setting provides a service that you can control different access rights for different wireless clients connected to your VoIP Router. The local and remote stations are limited to access Internet thro...

Page 66 - WAN QoS; Advanced Network; Downstream Bandwidth -; for priority marking.

DVG-G5402SP User’s Manual ADVANCED D-Link Systems, Inc. 66 3-2-5 Advanced Network 3-2-5-1 QOS WAN QoS ADVANCED → Advanced Network → QoS Enable WAN QoS: Check the box to guaranty the voice quality. Voice packets have the highest priority in IP networks, and the data transmission is distributed to les...

Page 67 - LAN QoS; Low

DVG-G5402SP User’s Manual ADVANCED D-Link Systems, Inc. 67 LAN QoS ADVANCED → Advanced Network → QoS Enable LAN QoS: Check the box to enable LAN QoS by Hardware. Priority: Use the drop-down menu to select Low or High for the VoIP Router to deliver the packets from LAN interface when the packets arri...

Page 72 - MAINTENANCE; Save and Reboot; Save All Settings; Backup Configurations File; Backup Configurations Template File; Backup Settings; Update Settings

DVG-G5402SP User’s Manual MAINTENANCE D-Link Systems, Inc. 72 3-3-2 Backup and Restore Save and Reboot MAINTENANCE → Backup and Restore Save All Settings: Click the Save All Settings check box and reboot the system after completing changes. The new settings will take effect after the VoIP Router is ...

Page 73 - Restore Default Settings

DVG-G5402SP User’s Manual MAINTENANCE D-Link Systems, Inc. 73 To restore a system settings file, click on Browse to search the local hard drive for the file to be used. Once you locate the file, click Upload Settings to overwrite the current settings with the settings saved to the file. Restore Defa...

Page 75 - Dynamic DNS

DVG-G5402SP User’s Manual MAINTENANCE D-Link Systems, Inc. 75 3-3-4 Dynamic DNS ADVANCED → Dynamic DNS Enable Dynamic DNS: Check the box to enable DDNS function. It is only necessary when the VoIP Router is set up behind an Internet sharing device that uses a dynamic IP address and does not support ...

Page 76 - Log Settings

DVG-G5402SP User’s Manual MAINTENANCE D-Link Systems, Inc. 76 3-3-5 Log Settings MAINTENANCE → Log Settings Enable: Check the box to send event notification messages across IP networks to the Server. Server Address: Enter the System Log Server’s IP address. Port: Enter the System Log Server’s listen...

Page 77 - Table

DVG-G5402SP User’s Manual MAINTENANCE D-Link Systems, Inc. 77 3-3-6 Diagnostics Use “Ping” to verify if a remote peer is reachable. Enter a remote IP address and click “Test” to ping the remote host. The result would be shown on Result Table MAINTENANCE → Diagnostics

Page 80 - Send record to CDR Server:; Tick the check box to enable the call detail recording.

DVG-G5402SP User’s Manual MAINTENANCE D-Link Systems, Inc. 80 3-3-8 CDR The user can set up a CDR Server to record call details for every phone call with TCP protocol. The present CDR provides the call event such as HOOK ON, HOOK OFF, DIALED NUMBER, DATE…recording in a text file and which can be imp...

Page 81 - STATUS; Device Info

DVG-G5402SP User’s Manual STATUS D-Link Systems, Inc. 81 3-4 STATUS 3-4-1 Device Info STATUS → Device Info For WAN Port Information, it shows IP address, subnet mask, default gateway and DNS server. If you use PPPoE to obtain IP, you will know if the IP is obtained through this method. If IP address...

Page 82 - VoIP Status

DVG-G5402SP User’s Manual STATUS D-Link Systems, Inc. 82 3-4-2 VoIP Status STATUS → VoIP Status For Port Status, it includes if each port registers to Proxy successfully, the last dialed number, how many calls each port has made since the VoIP Router is start, etc. For Server Registration Status, it...

Page 83 - LAN Client

DVG-G5402SP User’s Manual STATUS D-Link Systems, Inc. 83 3-4-3 LAN Client The Active Wireless Clients table displayed the identification and transmission status of active wireless clients on wireless LAN interface. The DHCP Clients table displayed LAN device that has already been assigned an address...

Page 84 - Statistics; Refresh; button to get the latest RTP Packet

DVG-G5402SP User’s Manual STATUS D-Link Systems, Inc. 84 3-4-4 Statistics STATUS → Statistics Display the information of the last call made. Press Refresh button to get the latest RTP Packet Summary. 3-4-5 Logout If setting or parameter has been changed, remember to save the changes before you logou...

Page 85 - VoIP Router Configuration-IVR; Configuring the VoIP Router through IVR; Preparation

DVG-G5402SP User’s Manual VoIP Router Configuration-IVR D-Link Systems, Inc. 85 4. Configuring the VoIP Router through IVR VoIP transmits voice data (packets) via the Internet, hence the condition and status of the network environment is relatively important to the telecommunications quality. If any...

Page 86 - enter; Save Settings

DVG-G5402SP User’s Manual VoIP Router Configuration-IVR D-Link Systems, Inc. 86 a new IP address) Æ enter 192*168*1*2 (new IP address). Save Settings When all setting procedures are completed, dial 509 (Save Settings) from phone keypad. Wait for about three seconds, you should hear a voice prompt “1...

Page 87 - Description

DVG-G5402SP User’s Manual VoIP Router Configuration-IVR D-Link Systems, Inc. 87 4-1-1 IVR Functions Table: Function Code Description Example / Notes 111/101 WAN Port IP address Set/Query 112/102 WAN Port Subnet Mask Set/Query 113/103 WAN Port Default Gateway Set/Query 114/104 Current Network IP Acce...

Page 88 - When voice prompt plays “Enter value”, dial 1 (to select static IP)

DVG-G5402SP User’s Manual VoIP Router Configuration-IVR D-Link Systems, Inc. 88 4-2 IP Configuration Settings—Set the IP Configuration of the WAN Port Static IP Settings Note: Complete static IP settings should include a static IP (option 1 under 114), IP address (111), Subnet Mask (112), and Defaul...

Page 89 - To save settings, dial

DVG-G5402SP User’s Manual VoIP Router Configuration-IVR D-Link Systems, Inc. 89 Select a PPPoE After entering IVR mode, dial 114. When voice prompt plays “Enter value,” dial 3 (to select PPPoE). PPPoE Account Settings After entering IVR mode, dial 121. When voice prompt plays “Enter value”, enter th...

Page 91 - Dialing Principles; -2 Dialed Number Processing Flow; A complete flow chart is shown on the next page.

DVG-G5402SP User’s Manual Dialing Principles D-Link Systems, Inc. 91 5. Dialing Principles 5-1 Dialing Options Dial the phone number which you want to call and press # to call out immediately. Note that if the “# (pound)” not dialed, the number will be called out after 4 seconds by default. The peri...

Page 92 - Start

DVG-G5402SP User’s Manual Dialing Principles D-Link Systems, Inc. 92 Start Enter a phone number (D#) Is (D#) defined in Speed Dial table? Does this gateway have an FXO port? End Dial out as defined in the first match case through the gateway Dial the number defined in Speed Dial table Dial (D#) thro...

Page 93 - Appendix; Product Features; WAN

DVG-G5402SP User’s Manual Appendix D-Link Systems, Inc. 93 Appendix Product Features WAN • One 10/100Mbps auto-negotiation, auto-crossover RJ-45 Ethernet port • Support static IP, PPPoE, BigPond Cable and DHCP address assignment and dynamic DNS (DDNS) • QoS: IP TOS (Type of Services) and DiffServ (D...