Page 2 - Wichtige Sicherheitshinweise
DSL-300G ADSL Ethernet Modem User’s Guide ii Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Vervenden Sie keine Flüssig- oder Aerosolreinige...
Page 3 - Limited Warranty
DSL-300G ADSL Ethernet Modem User’s Guide iii Limited Warranty Hardware: D-LINK WARRANTS EACH OF ITS HARDWARE PRODUCTS TO BE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS UNDER NORMAL USE AND SERVICE FOR A PERIOD COMMENCING ON THE DATE OF PURCHASE FROM D-LINK OR ITS AUTHORIZED RESELLER AND EXTENDIN...
Page 4 - D-Link Offices for Registration and Warranty Service; Trademarks; Copyright; Copyright Statement
DSL-300G ADSL Ethernet Modem User’s Guide iv D-Link Offices for Registration and Warranty Service THE PRODUCT'S REGISTRATION CARD, PROVIDED AT THE BACK OF THIS MANUAL, MUST BE SENT TO A D-LINK OFFICE. TO OBTAIN AN RMA NUMBER FOR WARRANTY SERVICE AS TO A HARDWARE PRODUCT, OR TO OBTAIN WARRANTY SERVIC...
Page 5 - TABLE OF CONTENTS
TABLE OF CONTENTS ABOUT THIS USER’S GUIDE......................................................................................................................... III Before You Start .......................................................................................................................
Page 7 - About This User’s Guide; Terminology
DSL-300G ADSL Ethernet Modem User’s Guide iii About This User’s Guide This user’s guide provides instructions on how to install the DSL-300G ADSL Modem and use it to connect a computer (or two computers) to the Internet. If you are using a computer with a functioning Ethernet port, you can use the Q...
Page 9 - Introduction; Modem Description and Operation
DSL-300G ADSL Ethernet Modem User’s Guide 1 Introduction This section provides a brief description of the Modem, its associated technologies and a list of Modem features. What is ADSL? Asymmetric Digital Subscriber Line (ADSL) is an access technology that utilizes ordinary copper telephone lines to ...
Page 10 - Rear Panel
DSL-300G ADSL Ethernet Modem User’s Guide 2 Front Panel Place the Modem in a location that allows a view of the LED indicators on the front panel. Front Panel Rear Panel All cable connections to the Modem are made at the rear panel. The power switch and factory reset button is located here as well. ...
Page 11 - Packing List
DSL-300G ADSL Ethernet Modem User’s Guide 3 LED Indicators LED Indicators The LED Indicators read as follows: POST: Turn On the device, all Lights will go ON for the duration of the test and then go OFF. Power: Steady green light indicates the unit is powered on. Status: Lights steady green during t...
Page 12 - Hardware Installation; Connect ADSL Line
DSL-300G ADSL Ethernet Modem User’s Guide 4 Hardware Installation In this chapter you will learn about the various connections you will need to make in order to use the Modem. When selecting the location for the Modem be sure to allow room to access the connections on the rear panel. You will want t...
Page 13 - Software Installation; Install the Modem Configuration Utility
DSL-300G ADSL Ethernet Modem User’s Guide 5 Software Installation In order to install the software driver for the Modem, you first need to install the DSL-300G Configuration Utility , D-Link’s GUI based management software. This software can later be used to monitor the device or change its settings...
Page 16 - Configure the Modem
DSL-300G ADSL Ethernet Modem User’s Guide 8 Configure the Modem With the Configuration Utility software installed, you are ready to configure the Modem. You must enter the VPI and VCI values that have been given to you by your ADSL service provider to define the path of connection to the ATM network...
Page 18 - Modem Diagnostics
DSL-300G ADSL Ethernet Modem User’s Guide 10 Modem Diagnostics The Configuration Utility can be used to monitor the activity and performance of the Modem. The four status windows are read-only with the exception of the General ADSL Information. Once you have set the VCI and VPI values there should n...
Page 19 - Advanced Diagnostics
DSL-300G ADSL Ethernet Modem User’s Guide 11 The Ethernet Information menu provides information about packets received and transmitted via the Ethernet interface. The Version Information menu lists the current device driver, firmware version and hardware version. Advanced Diagnostics To view the adv...
Page 20 - Factory Reset
DSL-300G ADSL Ethernet Modem User’s Guide 12 ♦ CRC – Cyclic Redundancy Checking, number of CRC errors since ADSL connection established ♦ FEC – Forward Error Correction, number of FEC errors since ADSL connection established ♦ HEC – Header Error Checking, number of HEC errors since ADSL connection e...
Page 21 - Technical Specifications; General; Physical & Environmental
DSL-300G ADSL Ethernet Modem User’s Guide 13 A Technical Specifications General Standards: ITU G.992.1 (G.dmt) Annex A ITU G.992.2 (G.lite) Annex A ITU G.994.1 (G.Hs) ANSI T1.413 (Issue 2) IEEE 802.3 IEEE 802.3u IEEE 802.1d RFC 2684 (displaces RFC 1483) Supports RFC 1213 (MIB II for IP) Data Transfe...
Page 22 - DSL-300G Firmware Upgrade Utility
DSL-300G ADSL Ethernet Modem User’s Guide 14 B DSL-300G Firmware Upgrade Utility You can update system firmware using the DSL-300G Firmware Upgrade Utility. To upgrade the Modem’s firmware you must have installed this software on the PC you wish to use for this purpose. Install the utility by clicki...
Page 24 - Offices
Offices Australia D-Link Australasia Unit 16, 390 Eastern Valley Way, Roseville, NSW 2069 Australia TEL: 61-2-9417-7100 FAX: 61-2-9417-1077 TOLL FREE (Australia): 1800-177100 TOLL FREE (New Zealand): 0800-900900 URL: www.dlink.com.au E-MAIL: [email protected] & [email protected] Canada D-Link...