D-Link DSL-1500G - Manuals

TABLE OF CONTENTS Limited Warranty ........................................................................................................................................... iii ABOUT THIS GUIDE................................................................................................ VII Guid...

DSL-1500G SHDSL Ethernet Router User’s Guide vii About This Guide Thank you for choosing the DSL-1500G Wireless SHDSL Router. The DSL-1500G delivers affordable T1 equivalent Internet access characterized by very high rate upload and downloads data transmission speeds. The standardized SHDSL technolo...

DSL-1500G SHDSL Ethernet Router User’s Guide viii Installation Overview The procedure to install the Router can be described in general terms in the following steps: 1. Gather information and equipment needed to install the device. Before you begin the actual installation make sure you have all the ...

DSL-1500G SHDSL Ethernet Router User’s Guide ix Account Information (User Name and Password) Most users will need to supply a user name and password used to access the service provider’s network (and ultimately, the Internet). This information is stored either in the Router’s memory or on your compu...

DSL-1500G SHDSL Ethernet Router User’s Guide 1 1 Introduction This chapter describes the Router and it features and includes brief introduction to SHDSL. Front and rear panel diagrams are used to illustrate the LED indicators and cable connections. Router Description and Operation The DSL-1500G SHDS...

DSL-1500G SHDSL Ethernet Router User’s Guide 2 Product Features The DSL-1500G SHDSL Router utilizes the latest DSL enhancements and router technologies to provide a robust Internet gateway suitable for most small to medium sized networks. VPN Support The DSL-1500G SHDSL supports VPN Pass Through for...

DSL-1500G SHDSL Ethernet Router User’s Guide 3 Standards Compatibility and Compliance The DSL-1500G complies with or is compatible with the following standards as recognized by their respective agencies. • ITU G.991.2 SHDSL compliant • RFC 1483 Multi-protocol over ATM “Bridged Ethernet” compliant • ...

DSL-1500G SHDSL Ethernet Router User’s Guide 4 Front Panel LED Display Place the Router in a location that permits an easy view of the LED indicators on the front panel. The LED indicators on the front panel include the Power, Status, SHDSL Link/Activity, and WLAN indicators. Each Ethernet LAN port ...

DSL-1500G SHDSL Ethernet Router User’s Guide 5 Rear Panel Cable Connections Connect the AC power adapter cord and network cables on the rear panel. The power switch and reset button are also located on the back of the device. Plug in power adapter here. Plug the other end into a power strip or wall ...

DSL-1500G SHDSL Ethernet Router User’s Guide 6 2 Hardware Installation Follow the instructions here to connect the Router and power it on. Instructions for performing a factory reset are provided at the end of this section. Select Location Place the Router in a location where the LED indicators can ...

DSL-1500G SHDSL Ethernet Router User’s Guide 7 3 Configuring the Router for the First Time The first time you setup the Router it is recommended that you configure the WAN connection using a single computer making sure that both the computer and the Router are not connected to the LAN. Once the WAN ...

DSL-1500G SHDSL Ethernet Router User’s Guide 8 Configure DHCP for Windows 95/98/Me Use the following steps to configure the administrator’s computer to be a DHCP client for computers running Windows 95, 98 or Me. 1. In Windows 95/98, click on the Start button, go to Settings and choose Control Panel...

DSL-1500G SHDSL Ethernet Router User’s Guide 9 Step 2 - Access the Configuration Manager Now that your computer’s IP settings allow it to communicate with the Router, you can access the configuration software. NOTE: Be sure that the web browser on your computer is not configured to use a proxy serve...

DSL-1500G SHDSL Ethernet Router User’s Guide 10 A new window will appear and you will be prompted for a user name and password to access the web-based manager. Use the default user name admin and password admin for first time set up. You should change the web-based manager access user name and passw...

DSL-1500G SHDSL Ethernet Router User’s Guide 11 Step 3 - Configure the Router The first page that appears after you successfully login displays the menu you need to configure the Router so it can connect to the Internet. The Router/Bridge Configuration menu is used to configure the Router’s WAN conn...

DSL-1500G SHDSL Ethernet Router User’s Guide 12 2. The remaining settings that must be configured are different for the different Connection Profile types. • If you have a Router with PPoA or Router with PPoE Connection Profile, you must supply a User Name and Password used to verify the identity of...

DSL-1500G SHDSL Ethernet Router User’s Guide 13 4 Web-based Management Guide The DSL-1500G uses an HTML-based graphical user interface (GUI) allowing users to manage the Router from anywhere on the LAN using a standard browser, software such as Netscape Navigator or Microsoft Internet Explorer. The ...

DSL-1500G SHDSL Ethernet Router User’s Guide 14 Web Manager Layout The web manager GUI displays two fields that can be scrolled with your mouse to view areas of the field that may be hidden from view. The field located on the left side of the GUI contains three folders that can be opened with a doub...

DSL-1500G SHDSL Ethernet Router User’s Guide 15 Router Configuration All the settings that define Router operations on both the LAN and WAN can be configured with the menus located in the Configuration folder. These menus are described in the first part of this chapter presented in the same order th...

DSL-1500G SHDSL Ethernet Router User’s Guide 17 Connect / Disconnect Buttons If you have enabled the Connect on Demand feature, the Router will begin to negotiate the WAN connection upon restarting. If the Connect on Demand feature has been disabled, click the Connect button to initiate the connecti...

DSL-1500G SHDSL Ethernet Router User’s Guide 18 IPoA Configuration To use IPoA it is first necessary to add this option to the Connection Profile list in the Configuration menu. Use the Connection Profile menu page (described below) to add an IPoA connection profile to the list. Router with IPoA Rou...

DSL-1500G SHDSL Ethernet Router User’s Guide 19 Adding and Changing Connection Profiles Use the Connection Profile menu to add new profiles or change existing profiles. Creating a new connection profile is necessary if your DSL service uses protocols that are not offered through the default Router/B...

DSL-1500G SHDSL Ethernet Router User’s Guide 20 Clicking the index number of an existing profile or the index number of an undefined profile brings up the Connection Profile Configuration menu: Add/Change Connection Profile NOTE: The VPI and VCI numbers are assigned by the network service provider. ...

DSL-1500G SHDSL Ethernet Router User’s Guide 21 Save the changes and reboot the system so the newly created or changed Connection Profile can be used in the Router/Bridge Configuration menu. It will then be necessary to make any other necessary changes in the Router/Bridge Configuration menu and aga...

DSL-1500G SHDSL Ethernet Router User’s Guide 22 Configuring LAN IP Settings Use this menu to change the Ethernet LAN IP address of the Router. You can also find the MAC address for the Router listed here. Ethernet IP Address Menu The Ethernet IP Address displays the current LAN IP settings of the Ro...

DSL-1500G SHDSL Ethernet Router User’s Guide 23 Proxy DNS Settings You may use the Router to provide DNS services for work stations on your LAN. To configure on-board DNS, click on the Proxy DNS button. Proxy DNS Menu The Proxy DNS Menu presents the following user defined parameters: Proxy DNS Choos...

DSL-1500G SHDSL Ethernet Router User’s Guide 24 DHCP Configuration Us e the DHCP Configuration on LAN menu to configure the Router to act as a DHCP server for the LAN. DHCP Configuration Menu Configure LAN DHCP services by defining the following parameters: Start IP Address Type in the base address ...

DSL-1500G SHDSL Ethernet Router User’s Guide 25 NAT Configuration Network Address Translation (NAT) is a routing protocol that allows your network to become a private network that is isolated from, yet connected to the Internet. It does this by changing the IP address of packets from a global IP add...

DSL-1500G SHDSL Ethernet Router User’s Guide 26 DMZ IP Address NAT may conflict with certain interactive applications such as video conferencing or playing Internet video games. For these applications, a NAT bypass can be set up using a DMZ IP address. The DMZ IP address is a “visible” address and d...

DSL-1500G SHDSL Ethernet Router User’s Guide 27 IP Masquerade Timer The IP Masquerade Timer is used to control how frequently the IP Masquerade table is updated. The IP Masquerade table is used to map the internal LAN IP addresses to the external WAN global IP address used for your account. If you a...

DSL-1500G SHDSL Ethernet Router User’s Guide 28 Port Redirection Port Redirection Menu The Port Redirection feature of the Router is used in conjunction with NAT or IP Masquerading to improve security and efficiency. Port redirection can be used to direct potentially hazardous packets to a proxy ser...

DSL-1500G SHDSL Ethernet Router User’s Guide 29 Port redirection is universally enabled or disabled for the Router with the Port Redirection State drop-down menu. The Existing Entry number tells you how many sets currently are configured. The Valid Entry number tells you the number of sets that are ...

DSL-1500G SHDSL Ethernet Router User’s Guide 30 Static Route Configuration Use Static Routing to specify a route used for data traffic within your Ethernet LAN or to route data on the WAN. This is used to specify that all packets destined for a particular network or subnet use a predetermined gatewa...

DSL-1500G SHDSL Ethernet Router User’s Guide 31 Advanced Filter & Firewall One of the most important elements of any network security implementation is the firewall. Packet filtering is a basic firewall security measure and should be used on any network that is exposed to security risk. A packet...

DSL-1500G SHDSL Ethernet Router User’s Guide 33 RIP Use the RIP menu to enable RIP version 1, version 2 or both for any interface. You can further specify whether to enable RIP packets to be sent or accepted. RIP is disabled by default on all interfaces (sending and accepting RIP packets). RIP Menu ...

DSL-1500G SHDSL Ethernet Router User’s Guide 34 Date & Time Settings The Router can use Network Time Protocol (NTP) to set system time and date accurately using a public or private NTP server. The function may be disabled if highly accurate time recording is not a priority. Date & Time Confi...

DSL-1500G SHDSL Ethernet Router User’s Guide 35 UPnP Universal Plug and Play (UPnP) is a feature that facilitates networking for a variety of devices and systems. UPnP allows enabled systems to be networked more easily. This feature is enabled by default. You can disable it in the UPnP Configuration...

DSL-1500G SHDSL Ethernet Router User’s Guide 36 System Maintenance The Mainatenance folder in the web mananger contains links to menus used for sytem maintenance functions including firmware upgarde and username/password configuration. ATM Loopback Test ATM loopback tests are used to verify connecti...

DSL-1500G SHDSL Ethernet Router User’s Guide 37 System Username and Password Use this screen to change the username and password used to access the Web Manager. The Web Manager can be accessed remotely from outside the LAN when it is functioning in router mode using the Remote Administration Access ...

DSL-1500G SHDSL Ethernet Router User’s Guide 38 Factory Reset The DSL-504 can be reset to the default configuration for all settings using the Factory Reset option. This will also change the both the LAN and WAN IP address of the device, so these will need to be reconfigured accordingly. Factory Res...

DSL-1500G SHDSL Ethernet Router User’s Guide 39 Configuration File Maintenance Use the Configuration File Maintenance store current settings to a file on your computer or to load previously saved configuration files on the device. Configuration Maintenance Screen To save the current settings to a co...

DSL-1500G SHDSL Ethernet Router User’s Guide 40 SHDSL Line Setting If your SHDSL connection is disconnected or the connection is faulty, you can try to reconnect using the SHDSL Line Setting menu. The SHDSL/Link LED Indicator will light green if you have a viable SHDSL link. You can also look at the...

DSL-1500G SHDSL Ethernet Router User’s Guide 41 Summary Use the summary windows to monitor Router performance and troubleshoot the device. System Summary The main summary page displays key information about the WAN connection and various Router functions. System Summary See the Summary description o...

DSL-1500G SHDSL Ethernet Router User’s Guide 43 DHCP Allocation Table The DHCP Allocation Table provides a summary of current IP setting allocation for the network. DHCP Allocation Table Information listed in the DHCP Allocation Table includes the following: Index Index reference number for entry. M...

DSL-1500G SHDSL Ethernet Router User’s Guide 44 Runtime Routing Table The Runtime Routing Table provides a summary of dynamic and static routing information for both the LAN and WAN interface. Runtime Routing Table Information listed in the Runtime Routing Table includes the following: IP Address IP...

DSL-1500G SHDSL Ethernet Router User’s Guide 45 Line Condition Use the Line Condition summary window for troubleshooting problems with the SHDSL connection. Line Condition Use the Clear button to start a fresh session. Check the Auto-Refresh box to automatically refresh the screen. SHDSL State Disco...

DSL-1500G SHDSL Ethernet Router User’s Guide 46 A Technical Specifications GENERAL LINE RATE 1 pair rate: Downstream/ Upstream up to 2.3 Mbps 2 pair rate: Downstream/ Upstream up to 4.6 Mbps MEDIA INTERFACE EXCHANGE One RJ-11 port SHDSL connection - 1 pair (pins 2 and 3) 2 pair (4 wire) One RJ-45 10...

DSL-1500G SHDSL Ethernet Router User’s Guide 47 STANDARDS AND PROTOCOLS ATM/DSL ITU G.991.2 (G.SHDSL) Annex A, Annex B ITU-T Rec. I.361 AAL5 ATM Forum UNI3.1/4.0 Supports F4/F5 Loopback test ATM Traffic Shaping (UBR, CBR, VBR-rt, VBR-nrt) ENCAPSULATION RFC 2684 (Bridged/Routed Ethernet over ATM) RFC...

Offices Australia D-Link Australasia 1 Giffnock Avenue, North Ryde, NSW 2113, Sydney, Australia TEL: 61-2-8899-1800 FAX: 61-2-8899-1868 TOLL FREE (Australia): 1800-177100 TOLL FREE (New Zealand): 0800-900900 URL: www.dlink.com.au E-MAIL: [email protected] & [email protected] Level 1, 434 St. ...

Registration Card Print, type or use block letters. Your name: Mr./Ms__________________________________________________________________________ Organization: ____________________________________________Dept.______________________________ Your title at organization:___________________________________...