Page 2 - TABLE OF CONTENTS; – PPP
2 TABLE OF CONTENTS 1.0 INTRODUCTION............................................................................................................. 4 2.0 PACKAGE CONTENT .................................................................................................... 4 3.0 LIST OF FIGURES ............
Page 4 - CD
4 1.0 INTRODUCTION Voice over IP (also known as Internet Phone) is a technology that allows anyone to make a telephone call over the Internet. This is a quick user guide for the DPH-120S SIP Phone. It is intended to help you configure the telephone and have it ready to run within a few minutes. Plea...
Page 5 - LIST OF FIGURES; Keypad
5 3.0 LIST OF FIGURES Diagram for D-Link IP Phone ( Model: DPH-120S ) (6) Redial/Call History (7) Hold (5) Transfer (4) Mute/Function (16) Numeric Keypad (1) 2 x 16 Characters LCD Display (14) 3-Way Conference (13) Voice Message (2) OK / Right (12) Cancel / Left (15) Phone Book (3) Menu (8) Speaker ...
Page 6 - SUMMARY OF KEY FUNCTIONS; Keys; Menu
6 4.0 SUMMARY OF KEY FUNCTIONS Keys Functions (1) LCD Display Displays menu, time, clock, name, phone number, call status (2) OK/Right Confirm setting change, exit menu, dial, save changes (3) Menu Access the phone menu (4) Mute/Function Disable user’s microphone so that the person on the other line...
Page 7 - CONNECTING THE IP PHONE; Wide Area Network / Internet; Power Adapter
7 5.0 CONNECTING THE IP PHONE Connect the IP Phone as the following diagram: Wide Area Network / Internet Cable/xDSL Modem Power Adapter Router/HUB Ethernet Cable Ethernet Cable
Page 8 - Summary
8 6.0 IP PHONE SETUP 6.1 Menu Summary Enable Disable Disable Enable Press the MENU key Display Name: kevin ADSL DIALUP: ENABLE/DISABLE ADSL DIALUP: ENABLE ADSL DIALUP: DISABLE ADSL ID: mike_2004 ADSL Password: ******** DHCP: ENABLE/DISABLE IP Address: AUTO IP Address: 061.063.083.254 Subnet Mask: AU...
Page 10 - ENABLE ADSL Dialup; ENABLE
10 NOTE 1: If you made any modifications, you may quit setup at any time by pressing MENU + OK to save and exit or MENU + CANCEL to quit without saving. The phone will automatically exit from the menu screen if there are no inputs from the user. NOTE 2: Use or to select ENABLE or DISABLE . NOTE 3 : ...
Page 11 - DISABLE ADSL Dialup; DHCP (Dynamic Host Configuration Protocol)
11 3 DISABLE ADSL Dialup 6.4 DHCP (Dynamic Host Configuration Protocol) DHCP allows the network administrator to distribute IP addresses when a computer is plugged into a different place in the network. If your ISP provides static IP address, you must disable DHCP and enter the IP address provided. ...
Page 12 - DISABLE
12 3 4 DISABLE DHCP 1 2 • Press • Subnet mask automatically acquired Subnet Mask: 255.255.254. 0 • Press • Use or to set DHCP to DISABLE • Press • Enter the IP address • Press • Router IP automatically acquired Router IP: 61. 63. 83.254 DHCP: DISABLE IP Address: 061.063.083.019
Page 14 - Do Not Disturb
14 6.7 Do Not Disturb This setting allows the user to reject all incoming phone calls. 6.8 CF (call forward) Unconditional Enable CF Unconditional to forward all the incoming calls to another number. Otherwise set to disable. You will need to use a web-browser to input the forwarded phone number. Re...
Page 15 - SAVE
15 6.11 Anonymous Call Enables the caller (user) to hide the name and phone number from the receiver. 6.12 Anony Call Rej (Anonymous Call Rejection) Reject any anonymous incoming calls. 6.13 Ringing Type Select the ring tone. There are four ring tones in total. NOTE: At this point, you may save the ...
Page 17 - Adjustment; Press to increase the ringer volume and to decrease the
17 6.18 Volume Adjustment 6.18.1 Ringer Volume While the handset is in place, • Press to increase the ringer volume and to decrease the ringer volume 6.18.2 Speaker Volume While the handset is in place, • Press • Press to increase the speaker volume and to decrease the speaker volume 6.18.3 Handset ...
Page 18 - Type in the
18 7.0 USING THE CONFIGURATION MENU The configuration menu can be accessed using a web browser. Some advanced features such as CF Unconditional, CF User Busy and CF No Answer must be setup from the web browser. 7.1 Accessing Configuration Menu • Open the web browser (ie. Internet Explorer, Netscape…...
Page 19 - Remote password to access the configuration menu from; VoIP software; (You may download this software from; Management Setting – Restore Factory Setting; Restores all the settings back to factory default settings.
19 User Name Configuration menu login name. Password Configuration menu login password. NTP Server IP Network Time Protocol (NTP) is a protocol used to help match your system clock with an accurate time source (eg atomic clock, time server). It is good practice to have all your networked computers s...
Page 20 - DNS address provided by your ISP.
20 7.4 Management Setting – Firmware update FTP server, login ID, login password and firmware filename are preset when you purchase the phone. These are required to download and update the firmware. FTP Server FTP Server address. Login ID Login ID provided by your supplier. Login Password Login pass...
Page 21 - Network Setting – PPPoE; Network Setting – Static IP
21 7.6 Network Setting – PPPoE Choose PPPoE if your ISP uses PPPoE. Most DSL users use PPPoE. PPPoE ID PPPoE ID/username provided by your ISP. PPPoE Password PPPoE password. DNS Server DNS address provided by your ISP. 7.7 Network Setting – Static IP Choose Static IP network setting if all Wide Area...
Page 22 - SIP Phone Port Number; Outbound proxy port number.
22 NOTE: RESTART the system for new settings to take effect after you modify the IP address. 7.8 SIP Setting – SIP Phone Setting, Registrar and Outbound Proxy Server Session Initiation Protocol (SIP) is the most popular Voice over IP standard. It enables two or more people to make phone calls, share...
Page 23 - Select SIP request method. Default method is Invite.
23 7.9 SIP Setting – Others This section is for network administrators. Session Timer The time interval in which the phone periodically refresh SIP sessions by sending repeated INVITE requests. These INVITE requests allow the user agent or proxies to determine the status of the SIP session. Media Po...
Page 26 - Select the tone method for IP phone.
26 7.12 Voice Setting and QoS Codec Voice Compression Algorithm priority settings. Select from the most used codec to the least used codec. RTP Packet Length Real-Time Transfer Protocol (RTP) packet length. VAD VAD detects voice activity and adjusts the signal to a target power level. It ensures tha...
Page 27 - Phone Settings – Phone Setting; Select Enable to reject anonymous calls.
27 7.13 Phone Settings – Phone Setting Recall you can only enable or disable call forwarding from the IP phone MENU key. With the web-browser, you can enter the forwarded phone numbers in the Phone Setting menu. Tone Setting Select the tone for particular country Ringer Type Select the type of ring ...
Page 28 - Phone Setting – Timer; NTP
28 Call Forward Click No Answer to enable call forward to another number when no one answers the phone after 180s (default). The timer can be changed from 0-600s. Refer to section 7.14 to change the timer. Click Busy to enable call forward to another number when user is busy on the phone. Click Unco...
Page 30 - Number 0x; Speed dial phone number. 0x is the speed dial number.; Restart System; to update all the modifications and reboot the system.
30 7.17 Speed Dial Speed dial numbers can be accessed from the IP phone. Refer to section 8.2 for speed dial info. Number 0x Speed dial phone number. 0x is the speed dial number. 7.18 Restart System Click Restart to update all the modifications and reboot the system.
Page 31 - Address
31 8.0 OPERATING THE PHONE 8.1 Dialing 8.1.1 IP Address 1. Lift handset or press SPEAKER button 2. Dial IP address. For example: dialing 192.168.0.1 3. Press OK or wait until the timer expires to dial. 8.1.2 SIP Number Note: You have to register with SIP server to use SIP number. 1. Lift handset or ...
Page 34 - You; Person B
34 8.8 On Hold Note: To transfer a call while on hold , press the TRANS key. Dial the extension/phone number and press the TRANS key again to transfer the call. While having a conversation: 1. Press HOLD (Press HOLD again to resume conversation) 8.9 Call Forward Please refer to IP Phone Setup and We...
Page 35 - from the Phonebook
35 9.0 USING THE PHONEBOOK 9.1 Dialing from the Phonebook 1. Press the PHONE BOOK key to access the phone book. 2. Press to scroll down the list until the name is displayed on the screen. 3. Press OK to dial. 9.2 Storing a Number 1. Press and hold the PHONE BOOK key until “ Name: ” is displayed on t...
Page 36 - Delete
36 9.3 Editing a Number 1. Press the PHONE BOOK key to access the phonebook. 2. Press until the name is displayed on the screen. 3. Press the PHONE BOOK key again. 4. Select “ Edit ” and press OK to edit. 5. Enter a new name and press OK 6. Enter the new phone number and press OK 7. Press OK to save...
Page 37 - Troubleshooting; QUESTION RECOMMENDED
37 10.0 Troubleshooting The following troubleshooting information can be used to help solve most common problems. QUESTION RECOMMENDED ACTION There are no DIAL tone 1. Check if there are any loose connections. Nothing is displayed on the LCD screen 1. Check if power cord is connected properly. 2. Ch...
