D-Link DI-LB604 - Manuals - manualsarea.com

Page 2 - Table of Contents

2 DI-LB604 User’s Manual D-Link Systems, Inc. Table of Contents Table of Contents Package Contents ............................................................................... 4Minimum System Requirements .............................................................. 4Introduction ..................

Page 4 - Package Contents; Minimum System Requirements

4 DI-LB604 User’s Manual D-Link Systems, Inc. Package Contents Package Contents  CAT-5 Ethernet Cable (All the DI-LB604’s Ethernet ports are Auto-MDIX)  Power Adapter (5.0V, 2A)  CD-ROM with Software and Manual  Quick Installation Guide Note: Using a power supply with a different voltage than th...

Page 5 - Introduction

5 DI-LB604 User’s Manual D-Link Systems, Inc. Introduction Introduction The D-Link Express EtherNetwork DI-LB604 is a 4-port Ethernet Broadband Router. The D-Link DI-LB604 enables users to quickly and easily share a high speed Internet connection. The D-Link DI-LB604 also incorporates many advanced ...

Page 6 - Features and Benefits

6 DI-LB604 User’s Manual D-Link Systems, Inc. Features and Beneﬁts Features and Beneﬁts  Connects multiple computers to a Broadband (Cable or DSL) modem to share the Internet connection.  Allows you to quickly and easily share an Internet connection with multiple computers and devices.  Supports ...

Page 7 - Hardware Overview; Connections; WAN Ports

7 DI-LB604 User’s Manual D-Link Systems, Inc. Hardware Overview Hardware Overview Connections WAN Ports This is for the connection of an Ethernet cable to your Cable or DSL modem. LAN Ports These are the connections for Ethernet cables to Ethernet enabled computers. Reset Button Pressing this button...

Page 8 - LEDs

8 DI-LB604 User’s Manual D-Link Systems, Inc. Hardware Overview LEDs Power LED A solid light indicates a proper connection to the proper power supply. Status LED This LED will be off to indicate proper operation and it will blink during data transmission. WAN LEDs A solid light indicates a connectio...

Page 9 - Getting Started

9 DI-LB604 User’s Manual D-Link Systems, Inc. Getting Started Getting Started

Page 10 - Using the Configuration Menu

10 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu Using the Conﬁguration Menu Whenever you want to conﬁgure your DI-LB604, you can access the Conﬁguration Menu by opening the Web-browser and typing in the IP Address of the DI-LB604. The DI-LB604’s default IP Address is shown...

Page 11 - Wizard; Home

11 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu Wizard The Home>Wizard screen will appear. Please refer to the Quick Installation Guide for more information regarding the Setup Wizard. These buttons appear on most of the conﬁguration screens in this section. Please clic...

Page 12 - WAN

12 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu Home > WAN WAN Dynamic IP: Select this if you want the WAN port to get its IP address from a DHCP server. PPPoE: Select this if you want the WAN port to get its IP address from a PPPoE server. Connection Mode: There are th...

Page 14 - Port Options

14 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu Port Options Home > WAN > Port Options WAN Port: Select the WAN port that you would like these port options to apply to. MTU: The largest amount of data that can be transferred across a given physical network. Connectio...

Page 16 - LAN; DHCP

16 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu LAN Home > LAN IP Address: This is the LAN IP address for this broadband router unit. Other computers on this LAN will see it as their gateway. Subnet Mask: The subnet mask address must be the same as PCs onyour LAN. The d...

Page 17 - DHCP Client List

17 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu View DHCP List: This button is linked to the page DHCP client List. Setting Static DHCP: Click here to conﬁgure static DHCP. Lease Time: The amount of time for a DHCP server leased a IP address to a client. DNS Server 1 IP fo...

Page 18 - Setting Static DHCP

18 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu Setting Static DHCP Home > DHCP > Setting Static DHCP Host Name: This should be your computer name. Static DHCP MAC Address: This is your computer’s network adapter address. You can ﬁnd this address by typing ipconﬁg /a...

Page 19 - Load Balance

19 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu Load Balance: To determine how the trafﬁc is shared among the WAN ports. Load Balance Conﬁguration Enable: This will allow you enable or disable the load balance feature. Load Balance Base on: Select the desired option to mea...

Page 20 - Advanced

20 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu Advanced The Advanced tab provides the following conﬁguration options: Host IP, Static Routing, Virtual Server, Applications, Multi DMZ, Filters, QoS and NAT. Host IP Advanced > Host IP Host Network Identity Host Name: Thi...

Page 24 - Applications

24 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu Applications Advanced > Applications Special Application: There are many special network applications that normally do not work behind a ﬁrewall. Due to network security considerations, only a few ports are open. Trafﬁc us...

Page 26 - Filters

26 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu WAN: The WAN port applied for current DMZ entry. Name: To identify current DMZ entry. PPPoE Sess: The PPPoE session that current DMZ entry is bound to. Private IP (LAN): The IP address of the server in DMZ. Access Group: To s...

Page 28 - QoS

28 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu QoS Advanced > QoS QoS Setup Enable QoS: Users can choose to Enable QoS (Quality of Service). If set to “enable” QoS, the QoS will allow higher priority packets to pass through the device. Queuing Method: The methods for m...

Page 29 - QoS Set Policy

29 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu QoS Set Policy Advanced > QoS > Set Policy QoS Policy Policy Name: The friendly name of a policy which is used to classify the received packets based on the following rules. Setting the QoS policy can assign received pa...

Page 30 - NAT

30 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu NAT Advanced > Nat NAT Conﬁguration: NAT Routing: To enable or disable NAT routing by checking or unchecking the checkbox. If you disable NAT routing, this device will act as a Bridge or Static Router. Most features, inclu...

Page 32 - Admin; Tools

32 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu Tools > Admin Admin Tools The Tools tab provides the following options: Admin, Time, System, Firmware, Email Alert, SNMP, DDNS, UPNP and Misc. Administrator Settings New Password / Conﬁrm Password: This administrator passw...

Page 33 - Time; System

33 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu Time Tools > System NTP Conﬁguration Time Zone: To specify one time zone from the time zone list that lists all time differences between GMT and each local time zone. NTP Servers: Up to 3 NTP servers can be used for the de...

Page 34 - Firmware

34 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu Firmware Tools > Firmware System Setting Save Settings To Local Hard Drive: You can save current system conﬁguration as a text ﬁle on a local hard disk, and then use the saved conﬁguration ﬁle to upgrade another device lat...

Page 35 - Email Alert

35 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu Email Alert Tools > Email Alert Global Settings Notiﬁcation on Email Alert Enable: To enable or disable the Email Alert in case that one of the WAN ports is disconnected. Excessive Ping: This function is useful to prevent ...

Page 36 - SNMP

36 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu SNMP Tools >SNMP Recipient Address: The email address of the receiver. SNMP (Simple Network Management Protocol) SNMP: This page only useful if you an SNMP program which you can use to access the Router and receive the tra...

Page 37 - DDNS

37 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu DDNS Tools > DDNS Dynamic DNS Dynamic DNS: This is a technology that people can use to connect to your router using a domain name, instead of an IP address, even if you have a dynamic IP address from your ISP(instead of a ...

Page 38 - UPnP

38 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu UPnP Tools >UPnP Enable Backup MX: Enable Backup to allow the use of Mail Exchanger. Mail Exchanger: Deﬁne mail exchanger for the domain name. If omitted, the mail exchanger will be set to the domain name. UPnP Option UPnP...

Page 41 - Device Info; Status

41 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu Device Information: This page describes the device’s interfaces (WAN ports and LAN port) settings and status.•Connect/Disconnect: Connect or disconnect PPPoE session immediately. •Force Renew: Renew DHCP lease immediately. De...

Page 42 - Log; Log Settings

42 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu Log Status > Log View Log View Log: The device keeps a running log of events and activities occurring on the device. The log will display up to 100 recent logs. Newer log activities will overwrite the older logs. When the ...

Page 44 - Stats

44 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu Stats Status > Statistics Refresh Refresh: Get the newest statistics data. Restart Counters: Clear all the statistics counters to 0. Restart Counters Check NAT Detail: The link to NAT Status page. NAT Statistics Connection...

Page 47 - NAT Connection List

47 DI-LB604 User’s Manual D-Link Systems, Inc. Using the Conﬁguration Menu TCP Property: This displays the MSS (Maximum Segment Size) and Maximum Windows size for TCP packets. NAT Trafﬁc: This section displays statistics for both outgoing (LAN to Internet) and Incoming (Internet to Local) trafﬁc. Co...

Page 48 - Troubleshooting

48 DI-LB604 User’s Manual D-Link Systems, Inc. Troubleshooting Troubleshooting This Chapter provides solutions to problems that can occur during the installation and operation of the DI-LB604 QoS Router. We cover various aspects of the network setup, including the network adapters. Please read the f...

Page 50 - Technical Specifications

50 DI-LB604 User’s Manual D-Link Systems, Inc. Technical Speciﬁcations VPN Pass Through/ Multi-Sessions  PPTP  IPSec Device Management  Web-Based- Internet Explorer v6 or later; Netscape Navigator v7 or later; or other Java-enabled browsers  DHCP Server and Client Advanced Firewall Features  NA...

Page 52 - Frequently Asked Questions; Why can’t I access the Web-based configuration?

52 DI-LB604 User’s Manual D-Link Systems, Inc. Frequently Asked Questions Frequently Asked Questions 1 Why can’t I access the Web-based conﬁguration? When entering the IP Address of the DI-LB604 (192.168.0.1), you are not connecting to the Internet or have to be connected to the Internet. The device...

Page 66 - How do I open ports on my router?

66 DI-LB604 User’s Manual D-Link Systems, Inc. Frequently Asked Questions 4 Can I use my D-Link Broadband Router to share my Internet connection provided by AOL DSL Plus? In most cases yes. AOL DSL+ may use PPPoE for authentication bypassing the client software. If this is the case, then our routers...

Page 68 - How do I configure the DMZ Host?

68 DI-LB604 User’s Manual D-Link Systems, Inc. Frequently Asked Questions 6 What is DMZ? Demilitarized Zone: In computer networks, a DMZ (demilitarized zone) is a computer host or small network inserted as a neutral zone between a company´s private network and the outside public network. It prevents...

Page 71 - What are virtual servers?; PC Anywhere

71 DI-LB604 User’s Manual D-Link Systems, Inc. Frequently Asked Questions Because our routers use NAT (Network Address Translation), you can only open a speciﬁc port to one computer at a time. For example: If you have 2 web servers on your network, you cannot open port 80 to both computers. You will...

Page 73 - 1 H ow c a n I u s e; e D o n k ey; b e h i n d my D - L i n k

73 DI-LB604 User’s Manual D-Link Systems, Inc. Frequently Asked Questions 1 1 H ow c a n I u s e e D o n k ey b e h i n d my D - L i n k Router? You must open ports on your router to allow incoming trafﬁc while using eDonkey. eDonkey uses three ports (4 if using CLI): 4661 (TCP) To connect with a se...

Page 76 - 3 How do I configure my router to play Warcraft 3?

76 DI-LB604 User’s Manual D-Link Systems, Inc. Frequently Asked Questions 13 How do I conﬁgure my router to play Warcraft 3? You must open ports on your router to allow incoming trafﬁc while hosting a game in Warcraft 3. To play a game, you do not have to conﬁgure your router. Warcraft 3 (Battlenet)...

Page 77 - 4 How do I use NetMeeting with my D-Link Router?

77 DI-LB604 User’s Manual D-Link Systems, Inc. Frequently Asked Questions You will need to change the port information within the Warcraft 3 software for computers #2 and up. Conﬁgure the Game Port information on each computer: Start Warcraft 3 on each computer, click Options > Gameplay . Scroll ...

Page 78 - Appendix; Securing Your Network

78 DI-LB604 User’s Manual D-Link Systems, Inc. Appendix Appendix Securing Your Network 1. Change Admin Password Changing the password to access your new router is the ﬁrst step in securing your network. This can done through the Wizard or on the Admin Page of the Tools tab. There is no password by d...

Page 79 - Glossary

79 DI-LB604 User’s Manual D-Link Systems, Inc. Appendix Glossary A Access Control List - ACL. Database of network devices that are allowed to access resources on the network. Access Point - AP. Device that allows wireless clients to connect to it and access the network Ad-hoc network - Peer-to-Peer ...

Page 87 - Contacting Technical Support

87 DI-LB604 User’s Manual D-Link Systems, Inc. Contacting Technical Support You can ﬁnd software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this produ...

Page 88 - Warranty

88 DI-LB604 User’s Manual D-Link Systems, Inc. Getting Started Warranty Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product from: · D-Link or its author...

Page 92 - Registration

92 DI-LB604 User’s Manual D-Link Systems, Inc. Registration 10/10/2005 Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.