D-Link DI-704UP - Manuals

6 LEDs LED LED Activity Power A solid light indicates a proper connection tothe power supply. Status WAN A Solid light indicates connection on theWAN port. This LED blinks during datatransmission. Flashes consistently to indicate that theDI-704UP is working properly. A solid lightindicates that the ...

7 Connections WARNING! Using a power supply with a different voltage rating than the one in- cluded with the DI-704UP will cause damage and void the warranty for this product. Receptor for Power Adapter Reset button is to reset the device to its factorydefault settings. Reset Button Printer Port WAN...

8 Introduction to Broadband Router Technology A router is a device that forwards data packets from a source to a destination. Routers can work on Open System Interconnection (OSI) layer 3, which for- wards data packets using an IP address and not a MAC address. A router will forward data from the In...

9 Introduction to Local Area Networking A Local Area Network (LAN) is typically an Ethernet-based network that con- nects several computers together over a small area such as a building or group of buildings. LAN’s can also be connected over large areas. A collection of LANs connected over a large a...

10 Sample Scenario You will need broadband Internet access (a Cable or DSL subscription line intoyour home or office) Consult with your Cable or DSL provider for proper installation of the modem Connect the Cable or DSL modem to the DI-704UP wireless broadband router ( see the Quick Installation Gui...

11 Note: Please see the Manual included with your modem for an explanation of the modem’s LEDs. Network Setup Turn everything off.A. Power OFF your Cable or DSL modem. If your modem does not have an on/off switch, disconnect the power cable. B. Turn OFF your computer. C. Do NOT connect the power ada...

12 Using the Setup Wizard The logon pop-up screen will appear. Once you have logged in, the Home screen will appear. Click Run Wizard Open your Web browser and type “http://192.168.0.1” into the URL address box. Then press the Enter or Return key. Type “admin” for the username and leave the password...

13 You will see the following screens Using the Setup Wizard (continued) Set up your new password . You have the option toestablish a password. Click Next Click Next

14 Select your InternetConnection. You will be prompted to select thetype of Internet connectionfor your router. Using the Setup Wizard (continued) Set up your Time Zone . You have the option to the setstandard time for your router.To change the defaultselection, select the dropdown arrow and choose...

15 Using the Setup Wizard (continued) If you selected Dynamic IP Address , this screen will appear: (Used mainly forCable Internet service.) If your ISP requires a Static IP Address , and this option is selected, then thisscreen will appear: Enter the IP Address informa-tion originally provided to y...

16 If your ISP uses PPPoE (Point-to-Point Protocol overEthernet), and this option isselected, then this screen willappear: (Used mainly for DSLInternet service.) Enter in the username andpassword provided to you byyour ISP. Using the Setup Wizard (continued) Please be sure to remove anyexisting PPPo...

17 Using the Configuration Menu Whenever you want to configure your network or the DI-704UP, you can access the Configuration Menu by opening the web-browser and typing in the IP Address of the DI-704UP. The DI-704UP default IP Address is shown below: Open the web browser.Type in the IP Address of t...

18 The Home>Wizard screen will appear upon log in. Please refer to the Quick Instal- lation Guide for more information regarding the Setup Wizard. Using the Configuration Menu (continued) Clicking Apply will save changes made to the page Clicking Cancel will clear changes made to the page Clickin...

19 Using the Configuration Menu (continued) Home > WAN (continued) WAN is short for Wide Area Network. The WAN settings can be referred to as thePublic settings. All IP information in the WAN settings are public IP addresses whichare accessible on the Internet. The WAN settings consist of four op...

23 Using the Configuration Menu (continued) Home > WAN > PPPoE (continued) Retype Password: Re-enter PPPoE password. Service Name: Enter the service name provided by your ISP. (optional) IP Address: This option is only available for Static PPPoE. Enter in the static IP address for the PPPoE co...

27 Using the Configuration Menu (continued) Home > LAN LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DI-704UP. These settings may be referred to as Private settings. You may change the LAN IP address if needed...

28 DHCP stands for Dynamic Host Control Protocol. The DI-704UP has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address A...

30 Using the Configuration Menu (continued) Advanced > Virtual Server The DI-704UP can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DI-704UP fire...

31 Using the Configuration Menu (continued) Advanced > Virtual Server The DI-704UP is also capable of port-redirection meaning incoming traffic to a particular port can be redirected to a different port on the server computer. Each of the virtual services that are created will be listed at the bo...

33 Using the Configuration Menu (continued) Advanced > Application Some applications require multiple connections, such as Internet gaming, video conferencing, and Internet telephony. These applications have difficulty working through NAT (Network Address Translation). Special Applications makes ...

34 Using the Configuration Menu (continued) Advanced > Application At the bottom of the screen, there are defined special applications. To use them, selectone from the drop down list and select an ID number you want to use. Then click the“Copy to” button and the router will fill in the appropriat...

37 Using the Configuration Menu (continued) Advanced > MAC Filters MAC (Media Access Control) Filters are used to allow or deny LAN (Local Area Network) computers from accessing the Internet and network by their MAC address. At the bottom of the screen, there is a list of MAC addresses from the D...

38 Using the Configuration Menu (continued) Advanced > MAC Filters MAC Address: Enter the MAC Address of the client that will be filtered. DHCP Client: Select from the DHCP Client list and click the Clone button to automatically clone that computer’s MAC address to the MAC address field. Name: En...

39 Using the Configuration Menu (continued) Advanced > URL Blocking Use URL Blocking filters to disallow computer(s) to access Internet with the followingURL keywords entered into the list. The URL Blocking filters are useful features that aresimilar to parental control. Users can enter keywords ...

40 Using the Configuration Menu (continued) Advanced > Domain Filter Use Domain filters to allow or deny computers access to specific Internet domainswhether it is through www, ftp, snmp, etc. Domain filters apply to wired computersconnected to one of the four Ethernet LAN ports to the DI-704UP.

41 Using the Configuration Menu (continued) Advanced > Domain Filter Delete: Select this option to remove the domain suffix from the Permitted Domains or BlockedDomains list. Permitted Domains: Enter in the domain suffix of the Internet domain you want to use. (Example: shopping.com, sports.net.)...

42 Firewall Rules is an advanced feature used to allow or deny traffic from passing through the Broadband Router. It works in the same way as IP Filters with additional settings. You can create more detailed access rules for the DI-704UP. When virtual services are created and enabled, it will also d...

43 Using the Configuration Menu (continued) Advanced > SNMP SNMP (Simple Network Management Protocol) is a widely used network monitoring andcontrol protocol that reports activity on each network device to the administrator of thenetwork. SNMP can be used to monitor traffic and statistics of the ...

47 Using the Configuration Menu (continued) Tools > Admin Administrator Settings At this page, the DI-704UP administrator can change the system password. There are two accounts that can access the Broadband Router’s Web-Management interface. They are admin and user . Admin has read/write access w...

48 Using the Configuration Menu (continued) Tools > Admin Remote Management: Remote Management allows the DI-704UP to be configured from the Internet by a web browser. A username and password is still required to access the Web-Management interface. In general, only a member of your network can b...

49 Using the Configuration Menu (continued) Tools > System Save Settings to Local Hard Drive: Click Save to save the current settings to the local Hard Drive Load Settings from Local Hard Drive: Click Browse to find the settings file, then click Load Restore to Factory Default Settings: Click Res...

50 Using the Configuration Menu (continued) Tools > Firmware You can upgrade the firmware by using this tool. First, check the D-Link support site forfirmware updates at http://support.dlink.com . Make sure that the firmware you want to use is saved on the local hard drive of your computer. Click...

52 Using the Configuration Menu (continued) Tools > Misc Block WAN Ping: Click Enable to block the WAN ping. Computers on the Internet will not get a reply back from the DI-704UP when it is being “ping”ed. This may help to increase security. Reboot: Click Reboot to restart the unit. SPI Mode: Sta...

54 Using the Configuration Menu (continued) Status > Device Info LAN LAN MAC Address: Displays the LAN port MAC/hardware address. IP Address: LAN/Private IP Address of the DI-704UP. Subnet Mask: LAN/Private Subnet Mask of the DI-704UP. WAN WAN MAC Address: Displays the WAN port MAC/hardware addre...

55 Using the Configuration Menu (continued) Status > Log The Broadband Router keeps a running log of events and activities occurring on the router. If the device is rebooted, the logs are automatically cleared. You may save the log files under Log Settings . First Page: The first page of the log....

56 Using the Configuration Menu (continued) Status > Log Settings Send E-Mail alert to: Enter in the email address of the recipient who will receive the email log. Log Settings Displays the logs of activities and events, and can be setup to send these logs to another location. E-Mail Alert: The D...

57 Using the Configuration Menu (continued) Help Help This menu displays the complete Help menu. For help at anytime, click on the Help tab in the configuration menu.

58 Installing the Print Server Software Insert the installation CD-ROM into the CD-ROM drive. The following window will beshown automatically. If it is not, please run “install.exe” on the CD-ROM. Click Next Click Install Print Server Software Click to Install Print Server Software foreither Windows...

59 Installing the Print Server Software (continued) Select the destination folder. After rebooting your computer, the software installation procedure is finished. Click Next Click Browse to select a destinationfolder Click Finish Click OK Select the option for restarting thecomputer .

60 Configuring on Windows 98SE/ME Platforms After you finish the software installation proce-dure, your computer will be capable of networkprinting provided by the DI-704UP. On a Win-dows 95/98 platform, open the Printers win- dow in the My Computer menu. Now, you can configure the print server ofth...

61 Configuring on Windows XP/2000/NT Platforms The configuration procedure for a Windows2000/XP platform is similar to that of Win-dows 95/98 except the screen of printer Prop- erties : Click Port Click Configure Port Type in the IP address of theDI-704UP. Click OK (Note: Screen shots are taken in W...

62 In this section you will learn how to establish a network at home or work,using Microsoft Windows XP. Note: Please refer to websites such as http://www.homenethelp.com and http://www.microsoft.com/windows2000 for information about networking computers using Windows 2000, ME or 98SE. Go to Start&g...

63 Please follow all the instructions in this window: Networking Basics (continued) Click Next In the following window, select the best description of your computer. If yourcomputer connects to the Internet through a gateway/router, select thesecond option as shown. Click Next Using the Network Setu...

66 Networking Basics (continued) Insert a disk into the Floppy Disk Drive, in this case, drive A. Format the disk if you wish, and click Next. In the window below, select the option that fits your needs. In this example, Create a Network Setup Disk has been selected. You will run this disk on each o...

68 Networking Basics (Continued) The new settings will take effect when you restart the computer. Click Yes to restart the computer. You have completed configuring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network. After run- ning the Network...

69 „ Networking Basics (Continued) „ „ „ „ „ Select the Computer Name Tab in the System Properties window. Enter a Computer De- scription ; this field is optional. To rename the computer or join a domain, Click Change . To name your computer, please follow these directions: In Windows XP : Click Sta...

70 Assigning a Static IP Address in Windows XP/2000 Note: Residential Gateways/Broadband Routers will automatically assign IP Ad- dresses to the computers on the network, using DHCP (Dynamic Host Configura- tion Protocol) technology. If you are using a DHCP-capable Gateway/Router you will not need t...

71 Networking Basics (Continued) Assigning a Static IP Address in Windows XP/2000 „ Double-click on Network Connections „ „ Double-click on Properties Right-click on Local Area Connections

72 Networking Basics Assigning a Static IP Address in Windows XP/2000 You have successfully assigned a Static IP Address. „ „ IP address: e.g ., 192.168.0.2 Subnet mask: 255.255.255.0 Default gateway: Enter the LAN IP address of the wireless router. (D-Linkwireless routers have a LAN IPaddress of 19...

73 Networking Basics (Continued) Go to the Apple Menu and select System Preferences Double-click on Network Select Built-in Ethernet in the Show pull-down menu Select Using DHCP in the Configure pull-down menu Click Apply Now The IP Address, Subnet mask , and the Router’s IP Address will appear in a...

74 Networking Basics Checking the Connection by Pinging in Windows XP and 2000 Checking the Connection by Pinging in Windows Me and 98 Go to Start > Run > type cmd . A window similar to this one will appear. Type ping xxx.xxx.xxx.xxx , where xxx is the IP Address of the Router or Access Point....

75 Resetting the DI-704UP to the Factory Default Settings After you have tried other methods for troubleshooting your network, you may To hard-reset the D-Link DI-704UP to the Factory Default Settings, please dothe following: „ „ Use a paper clip to press the Reset button and power on. Locate the Re...

76 Standard IEEE 802.3 10Base-T EthernetIEEE 802.3u 100Base-TX Fast EthernetIEEE 802.3 NWay Auto-NegotiationUSB 1.1 VPN Pass Through PPTPL2TPIPSec Ports One WANFour LAN LEDs PowerWANPrinterLocal Network - 10/100 Operating Temperature 32 o F to 131 o F (0 o C to 55 o C) Humidity 95% maximum (non-cond...

77 Frequently Asked Questions When entering the IP Address of the DI-704UP (192.168.0.1), you are not connecting to the Internet or have to be connected to the Internet. The device has the utility built- in to a ROM chip in the device itself. Your computer must be on the same IP subnetto connect to ...

80 Frequently Asked Questions (continued) Step 4 Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to configure. Most D-Link devices use the192.168.0.X range. How can I find my IP Address in Windows 95, 98, orME? Step 1 Click on Start , t...

81 Frequently Asked Questions (continued) Step 4 (continued) Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to configure. Most D-Link devicesuse the 192.168.0.X range. How can I find my IP Address in Windows 2000/XP? Step 1 Click on St...

85 Frequently Asked Questions (continued) How can I setup my router to work with a Cable modem connection? Dynamic Cable connection ( i.e. Cox, Adelphia, Rogers, Roadrunner, Charter, and Comcast). Note: Please configure the router with the computer that was last connected directly to the cable modem...

86 Frequently Asked Questions (continued) How can I setup my router to work with a Cable modem connection?(continued) Step 3 Power cycle the cable modem and router: First turn the cable modem off. Next, turn the router off Leave them off for 2 minutes**. After 2 minutes**, turn the cable modem on. W...

88 Step 8 Click Apply . When prompted, click Continue . Once the screen refreshes, unplug the power to the D-Link router. Step 9 Turn off your DSL modem for 2-3 minutes. Turn back on. Once the modem has established a link to your ISP, plug the power back into the D-Link router. Wait about 30 seconds...

89 Frequently Asked Questions (continued) How do I open ports on my router? To allow traffic from the Internet to enter your local network, you will need to open up ports or the router will block the request. Step 1 Log into the web based configuration by typing in the IP Address of the router (defa...

90 Frequently Asked Questions (continued) What is DMZ? Demilitarized Zone: In computer networks, a DMZ (Demilitarized Zone) is a computer host or small network inserted as a neutral zone between a company´s private network and the outside public network. It prevents outside users from getting direct...

92 Frequently Asked Questions (continued) How do I open a range of ports on my DI-704UP using Firewall rules? Step 1 Log into the web based configuration by typing in the IP Address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is bla...

93 Frequently Asked Questions (continued) What are virtual servers? A Virtual Server is defined as a service port, and all requests to this port will be redirected to the computer specified by the server IP. For example, if you have an FTP server (port 21) at 192.168.0.5, a Web server (port 80) at 1...

94 Frequently Asked Questions (continued) Step 6 Create a second entry as shown. Step 7 Click Apply and then click Continue . Step 8 Create a third and final entry as shown here: Step 10 Run PCAnywhere from the remote site and use the WAN IP Address of the router, not your computer´s IP Address. Ste...

95 How can I use eDonkey behind my D-Link Router? Frequently Asked Questions (continued) You must open ports on your router to allow incoming traffic while using eDonkey. eDonkey uses three ports (4 if using CLI): 4661 (TCP) To connect with a server 4662 (TCP) To connect with other clients 4665 (UDP...

96 Frequently Asked Questions (continued) To play SOCOM and hear audio, you must download the latest firmware for the router(if needed), enable Game Mode, and open port 6869 to the IP Address of yourPlaystation. Step 1 Upgrade the firmware. Step 2 Log into the web based configuration by typing in th...

97 NAME - Gamespy1 PRIVATE IP - The IP Address of your computer that you are running Gamespy from. PROTOCOL TYPE - Both PRIVATE PORT - 3783 PUBLIC PORT - 3783 SCHEDULE - Always. NAME - Gamespy2 PRIVATE IP - The IP Address of your computer that you are running Gamespy from. PROTOCOL TYPE - Both PRIVA...

98 Note: Make sure that you did not enable proxy/firewall in the KaZaA software. Frequently Asked Questions (continued) How do I configure my router for KaZaA and Grokster? The following is for KaZaA, Grokster, and others using the FastTrack P2P file sharingsystem. In most cases, you do not have to ...

99 Frequently Asked Questions (continued) How do I configure my router to play Warcraft 3? To host a Warcraft 3 game, you must open ports on your router to allow incomingtraffic. To play a game, you do not have to configure your router. Warcraft 3 (Battlenet) uses port 6112. For the DI-704UP: Step 4...

102 Frequently Asked Questions (continued) If using Mac OS X Firewall, you may need to temporarily turn off the firewall in the Sharing preference pane on both computers. To use the Mac OS X Firewall, you must open the same ports as in the router: Step 1 Choose Apple menu > System Preferences . S...

104 What is NAT? NAT stands for Network Address Translator . It is proposed and described in RFC- 1631 and is used for solving the IP Address depletion problem. Each NAT box has atable consisting of pairs of local IP Addresses and globally unique addresses, bywhich the box can “translate” the local ...

105 Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States andwithin Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link tec...

106 Warranty and Registration (USA only) Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product from: • D-Link or its authorized reseller or distributor an...