D-Link DGS-1100-05/08/08P/16/24 - Manuals

Page 2 - D-Link EasySmart Switch User Manual; Table of Contents; Step 3

D-Link EasySmart Switch User Manual i i Table of Contents Table of Contents ............................................................................................................................................. i About This Guide ..................................................................

Page 4 - D-Link Web Smart Switch User Manual; iii

D-Link Web Smart Switch User Manual iii L2 Features .............................................................................................................................................. 41 VLAN ....................................................................................................

Page 5 - About This Guide; The model you have purchased may; NOTE; indicates important information that; CAUTION; indicates potential property damage; Copyright and Trademarks

D-Link EasySmart Switch User Manual 1 About This Guide This guide provides instructions to install the D-Link Gigabit Ethernet EasySmart Switch DGS-1100-05/08/08P/16/24, how to use the W eb Utility, and to configure Web-based Management step-by-step. Note: The model you have purchased may appear sli...

Page 6 - Product Introduction; Front Panel; Green: Indicates that the port is running at 1000M.; Rear Panel; The port is where to connect the 5V/1A AC adapter.

D-Link EasySmart Switch User Manual 2 1 Product Introduction Thank you and congratulations on your purchase of D-Link EasySmart Switch Products. D-Link's next generation EasySmart Ethernet switch series blends plug-and-play simplicity with exceptional value and reliability for small and medium-sized...

Page 8 - Figure 7

D-Link EasySmart Switch User Manual 4 Blinking: Indicates that the Switch is either sending or receiving data to the port. Green: Indicates that the port is running at 1000M. Amber: Indicates that the port is running at 10/100M. Light off: No link. PoE LED (Ports 1-8): Green: Indicates the PoE power...

Page 9 - The power port is where to connect the AC power cord.; Connect the supplied AC power cable to this port.

D-Link EasySmart Switch User Manual 5 5 Rear Panel Figure 8– DGS-1100-16 Rear Panel Power: The power port is where to connect the AC power cord. DGS-1100-24 24-Port 10/100/1000Mpbs EasySmart Switch Front Panel Figure 9 – DGS-1100-24 Front Panel Power LED: The Power LED lights up when the Switch is c...

Page 10 - Hardware Installation; Step 2: Switch Installation; Desktop or Shelf Installation

D-Link EasySmart Switch User Manual 6 2 Hardware Installation This chapter provides unpacking and installation information for the D-Link EasySmart Switch. Step 1: Unpacking Open the shipping carton and carefully unpack its contents. Please consult the packing list located in the User Manual to make...

Page 11 - Figure 11 – Attach the adhesive rubber pads to the bottom; Rack Installation; Figure 12 – Attach the mounting brackets to the Switch

D-Link EasySmart Switch User Manual 7 7 Figure 11 – Attach the adhesive rubber pads to the bottom Rack Installation The switch can be mounted in an EIA standard size 11-inch rack, which can be placed in a wiring closet with other equipment. To install, attach the mounting brackets to the switch’s si...

Page 12 - Mounting on a cement wall; Figure 14 –Wall mount installation; Step 3 – Plugging in the AC Power Cord

D-Link EasySmart Switch User Manual 8 B) Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised. C) Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardou...

Page 13 - Figure 15 –Plugging the switch into an outlet; Power Failure; A screwdriver (not included in the accessory kit); Figure 16 –Ground cable, screw and #8 terminal lug rings

D-Link EasySmart Switch User Manual 9 9 Figure 15 –Plugging the switch into an outlet Power Failure As a precaution, the switch should be unplugged in case of power failure. W hen power is resumed, plug the switch back in. Grounding the Switch This section describes how to connect the EasySmart Swit...

Page 14 - Getting Started; Management Options; Supported Web Browsers

D-Link EasySmart Switch User Manual 10 3 Getting Started This chapter introduces the management interface of D-Link EasySmart Switch. Management Options The D-Link EasySmart Switch can be managed through any port on the device by using the W eb-based Management or through any PC using the SmartConso...

Page 15 - Figure 17 –Connected Ethernet cable; Login Web-based Management; , the PC should have; OK; . The default password is; admin; Figure 19 – Logon Dialog Box; SmartConsole Utility

D-Link EasySmart Switch User Manual 1 1 1 1 Figure 17 –Connected Ethernet cable Login Web-based Management In order to login and configure the switch via an Ethernet connection, the PC must have an IP address in the same subnet as the switch. For example, if the switch has an IP address of 10.90.90....

Page 16 - Please be sure to uninstall any existing

D-Link EasySmart Switch User Manual 12 NOTE: Please be sure to uninstall any existing SmartConsole Utility from your PC before installing the latest SmartConsole Utility. Option 1: Follow these steps to install the SmartConsole Utility via the autorun program on the installation CD. 1. Insert the Ut...

Page 17 - Figure 20– SmartConsole Utility; SmartConsole Settings; Figure 21– SmartConsole Utility Settings

D-Link EasySmart Switch User Manual 1 1 3 3 4 SmartConsole Utility The D-Link SmartConsole Utility allows the administrator to quickly discover all D-Link Smart Switches and EasySmart Switches which are in the same domain of the PC, collect traps and log messages, and quick access to basic configura...

Page 18 - Figure 22– SmartConsole Log

D-Link EasySmart Switch User Manual 14 NOTE: If the Group Interval is set to 0, IGMP Snooping must be disabled in the Switch or the switches will not be discovered. Log Click this icon to launch the Log window. Click View Log to show the events of the SmartConsole Utility and the device. Date/Time i...

Page 19 - Monitor List; Figure 24– SmartConsole Monitor List; About; Figure 25– SmartConsole About; Device Configuration; Device Settings

D-Link EasySmart Switch User Manual 1 1 5 5 Monitor List By clicking on this icon you will see below options: Figure 24– SmartConsole Monitor List Monitor Save: Records the setting of the Device List as default for the next time the SmartConsole Utility is used. Monitor Save As: Records the setting ...

Page 20 - Figure 26 – SmartConsole Device Settings; The EasySmart Switch automatically; Group Interval; Figure 27– SmartConsole Password Manager; Firmware Upgrade; is firmware upgrade fails or cannot be completed for any reason.

D-Link EasySmart Switch User Manual 16 To apply the configuration, insert the correct device password in the Confirm Password box and then click OK Figure 26 – SmartConsole Device Settings NOTE: The EasySmart Switch automatically sends out discovery packets to maintain the connection between the dev...

Page 21 - Figure 28 –Firmware Upgrade; Web Access; Figure 30 – SmartConsole Add device

D-Link EasySmart Switch User Manual 1 1 7 7 Figure 28 –Firmware Upgrade DHCP Refresh: If a DHCP-client enabled switch in the Device List shows the default IP is still used, it means the device did not receive an IP address from the DHCP server successfully. Select that switch and click the DHCP refr...

Page 22 - Figure 6– SmartConsole Delete device; Device List; Figure 32– SmartConsole Device List; SNMP

D-Link EasySmart Switch User Manual 18 Figure 6– SmartConsole Delete device Device List This list displays all discovered W eb Smart and EasySmart switches on the network. Figure 32– SmartConsole Device List Definitions of the Device List features: Monitor: The in the monitor means the device was di...

Page 23 - Configuration; Web-based Management; Figure 33 – Web-based Management; Tool bar

D-Link EasySmart Switch User Manual 1 1 9 9 5 Configuration The features and functions of the D-Link EasySmart Switch can be configured for optimum use through the Web-based Management Utility. Web-based Management After a successful login you will see the screen below: Figure 33 – Web-based Managem...

Page 24 - Tool Bar > Save Menu; The Save Menu provides Save Configuration.; Figure 34 – Save Menu; Tool Bar > Tool Menu; Figure 36 – Tool Menu; Provide a safe way to reboot the system. Click; Figure 37– Tool Menu > Reboot Device; Click

D-Link EasySmart Switch User Manual 20 Finally, by clicking on the D-Link logo at the upper-left corner of the screen you will be redirected to the local D-Link website. Tool Bar > Save Menu The Save Menu provides Save Configuration. Figure 34 – Save Menu Save Configuration Select to save the ent...

Page 25 - Figure 89 – Tool Menu > Firmware backup & upgrade

D-Link EasySmart Switch User Manual 2 2 1 1 Click Browse to browse your inventories for a saved firmware file. Click Upgrade after selecting the firmware file you want to restore. Figure 89 – Tool Menu > Firmware backup & upgrade CAUTION: Do not disconnect the PC or remove the power cord from...

Page 26 - Function Tree; Figure 41–Function Tree

D-Link EasySmart Switch User Manual 22 Function Tree All configuration options on the switch are accessed through the Setup menu on the left side of the screen. Click on the setup item that you want to configure. The following sections provide more detailed description of each feature and function. ...

Page 27 - Figure 92– Device Information

D-Link EasySmart Switch User Manual 2 2 3 3 Figure 92– Device Information System > System Settings The System Setting allows the user to configure the IP address and the basic system information of the Switch. IP Information: There are two ways for the switch to obtain an IP address: Static and D...

Page 28 - Figure 114– System > Port Setting

D-Link EasySmart Switch User Manual 24 System > Port Settings In the Port Setting page, the status of all ports can be monitored and adjusted for optimum configuration. By selecting a range of ports ( From Port and To Port ), the Speed can be set for all selected ports, effective by clicking Appl...

Page 29 - Figure 136 – System > Password Access Control

D-Link EasySmart Switch User Manual 2 2 5 5 Select the event message(s) to be sent out to the managing station. System Event: The system level messages contain: Device Bootup - System boot-up information Illegal Login - Events of incorrect password logins and records the IP of the source PC Twisted ...

Page 30 - Figure 158- L2 Features > Port Trunking Settings; L2 Features > IGMP Snooping; Figure 169 – L2 Features > IGMP Snooping setting; L2 Features > Port Mirroring; Figure 50 –L2 Features > Port Mirroring; Selection; Sniffer Mode; for the Source Ports is as follows:

D-Link EasySmart Switch User Manual 26 Figure 158- L2 Features > Port Trunking Settings L2 Features > IGMP Snooping With Internet Group Management Protocol (IGMP) snooping, the EasySmart Switch can make intelligent multicast forwarding decisions by examining the contents of each frame’s Layer ...

Page 31 - L2 Features > Loopback Detection; Figure 51– L2 Features > Loopback Detection; Enabled; Apply

D-Link EasySmart Switch User Manual 2 2 7 7 TX (transmit) mode: Duplicates the data transmitted from the source port and forwards it to the Target Port. Click “all” to include all ports into port mirroring. RX (receive) mode: Duplicates the data that received from the source port and forwards it to ...

Page 32 - Figure 172– L2 Features > Statistics menu

D-Link EasySmart Switch User Manual 28 Figure 172– L2 Features > Statistics menu Refresh All: Renews the details collected and displayed. Clear All Counters: To reset the details displayed. TxOK: Number of packets transmitted successfully. RxOK: Number of packets received successfully. TxError: N...

Page 34 - Click to rename the VLAN group.

D-Link EasySmart Switch User Manual 30 Figure 205– VLAN > 802.1Q VLAN > Add VID Figure 216– VLAN > 802.1Q VLAN > Assign PVID Rename: Click to rename the VLAN group. Delete VID: Click to delete the VLAN group. Figure 227– VLAN > 802.1Q VLAN > VLAN Table NOTE: When 802.1Q VLAN is ena...

Page 35 - VLAN > Surveillance VLAN

D-Link EasySmart Switch User Manual 3 3 1 1 NOTE: When 802.1Q Management VLAN is enabled, the 802.1Q VLAN should be enabled first. VLAN > Port-Base VLAN Port-Based VLANs are the simplest and most common form of VLAN. It assigns the appliance LAN ports to VLANs, effectively transforming the applia...

Page 36 - Enable Surveillance VLAN; Figure 60 – L2 Features > Surveillance VLAN Settings

D-Link EasySmart Switch User Manual 32 The Surveillance VLAN settings are accomplished in the following steps. 1. Enable Surveillance VLAN 2. Select a VLAN ID to become a surveillance VLAN and set the priority (By default, the priority is high) 3. D-Link Cameras can be recognized and placed into the...

Page 37 - Figure 61– L2 Features > Surveillance VLAN Settings > Component type; VLAN > Traffic Segmentation; By default, the Traffic Segmentation is disabled.; Figure 263 –VLAN >Traffic Segmentation; Supports Traffic

D-Link EasySmart Switch User Manual 3 3 3 3 Figure 61– L2 Features > Surveillance VLAN Settings > Component type VLAN > Voice VLAN Voice VLAN is a feature that allows you to automatically place the voice traffic from D-Link IP phones to an assigned VLAN to enhance the IP voice service. W it...

Page 38 - Strict Priority; Figure 285– QoS > Storm Control; User can select the

D-Link EasySmart Switch User Manual 34 QoS > 802.1p Default Priority QoS is an implementation of the IEEE 802.1p standard that allows network administrators to reserve bandwidth for important functions that require a larger bandwidth or that might have a higher priority, such as VoIP (voice-over ...

Page 39 - Figure 296– QoS > Bandwidth Control; RX

D-Link EasySmart Switch User Manual 3 3 5 5 Click Apply for the settings to take effect. QoS > Bandwidth Control The Bandwidth Control page allows network managers to define the bandwidth settings for a specified port’s transmitting and receiving data rates. Figure 296– QoS > Bandwidth Control...

Page 40 - Figure 307 – Security > Static Mac Address

D-Link EasySmart Switch User Manual 36 Figure 307 – Security > Static Mac Address NOTE: DGS-1100-16/24 support 128 Static MAC Address entries, but DGS-1100-05/08/08P only support 32 entries. To initiate the removal of auto-learning for any of the uplink ports, click On to enable this feature, and...

Page 41 - Figure 318 – Security >Dynamic Forwarding Table; Click Apply to make the configurations take effects.

D-Link EasySmart Switch User Manual 3 3 7 7 Figure 318 – Security >Dynamic Forwarding Table PoE > PoE Global Settings (DGS-1100-08P only) This page allows user to configure the global PoE settings of the device and also displays current PoE status including Total PoE Power Budget, Power Used, ...

Page 42 - percentage of PoE power supplied.; Figure 70 – PoE > PoE Port Setting

D-Link EasySmart Switch User Manual 38 • The ratio of system power supply (The percentage of PoE power supplied): Displays the percentage of PoE power supplied. PoE > PoE Port Settings (DGS-1100-08P only) DGS-1100-08P supports Power over Ethernet (PoE) as defined by the IEEE specification. It sup...

Page 43 - For the PoE Port Settings table, if the

D-Link EasySmart Switch User Manual 3 3 9 9 Click Apply to make the configurations take effects or click Refresh to redisplay the table. NOTE: For the PoE Port Settings table, if the classification was shown as “Legacy PD”, it will be classified to non-AF PD or Legacy PD.

Page 44 - Appendix A - Ethernet Technology; Gigabit Ethernet Technology

D-Link EasySmart Switch User Manual 40 Appendix A - Ethernet Technology This chapter will describe the features of the D-Link EasySmart Switch and provide some background information about Ethernet/Fast Ethernet/Gigabit Ethernet switching technology. Gigabit Ethernet Technology Gigabit Ethernet is a...

Page 45 - Appendix B - Technical Specifications; Hardware Specifications

D-Link EasySmart Switch User Manual 41 Appendix B - Technical Specifications Hardware Specifications Key Components / Performance Switching Capacity: - DGS-1100-05 :10Gbps - DGS-1100-08/08P: 16Gbps - DGS-1100-16: 32Gbps - DGS-1100-24: 48Gbps Max. Forwarding Rate: - DGS-1100-05: 7.4 Mbps - DGS-1100-0...

Page 46 - Appendix C – Rack mount Instructions

D-Link EasySmart Switch User Manual 42 Appendix C – Rack mount Instructions Safety Instructions - Rack Mount Instructions - The following or similar rack-mount instructions are included with the installation instructions: A) Elevated Operating Ambient - If installed in a closed or multi-unit rack as...