D-Link DCS-6620G - Manuals

5 DCS-6620G User’s Manual D-Link Systems, Inc. Features & Benefits A/V Output The SECURICAM Network DCS-6620G comes with an A/V output allowing you to connect to your TV for local viewing. The DCS-6620G can also be connected directly to your VCR to record activities. Powerful Surveillance and Rem...

6 DCS-6620G User’s Manual D-Link Systems, Inc. Connections Connections Ethernet 10/100 RJ-45 socket The DCS-6620G back panel features an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling. This network port supports the NWay protocol , allowing the 802.1...

7 DCS-6620G User’s Manual D-Link Systems, Inc. Connections Located on the bottom panel of the DCS-6620G , the socket is used to connect the camera stand to the 802.11g PTZ Internet Camera by attaching the screw head on the camera stand to the 802.11g PTZ Internet Camera. Bottom Panel Attachment sock...

8 DCS-6620G User’s Manual D-Link Systems, Inc. Connections Included with the DCS-6620G is an infrared remote control. You have the option of controlling the camera via the Pan/Tilt/Zoom Controls using the IP surveillance software, Internet Explorer, or via the infrared remote. To use the remote, mak...

9 DCS-6620G User’s Manual D-Link Systems, Inc. Hardware Installation Attaching the Internet Camera to the Camera Stand Hardware Installation The Internet Camera comes with a camera stand with a swivel ball screw head that can be attached to the Internet Camera bottom socket cavity. Attach the camera...

10 DCS-6620G User’s Manual D-Link Systems, Inc. Installation Wizard Installation Wizard After you have successfully completed the hardware installation of the DCS-6620G 802.11g PTZ Internet Camera, it is necessary to install software to configure and operate the camera. The first step is to install th...

13 DCS-6620G User’s Manual D-Link Systems, Inc. Installation Wizard Installation is now complete. IMPORTANT: A hardware reset of the 802.11g PTZ Internet Camera may be required if the Installation Wizard cannot find the camera. To accomplish this reset, lightly insert a paper clip (or a similar sized...

14 DCS-6620G User’s Manual D-Link Systems, Inc. Installation Wizard The Installation Wizard will now show a MAC address for the DCS-6620G and an IP address. This IP address may not be correct at this step in the installation until you see “Yes” under the assigned column. The camera is now automatica...

15 DCS-6620G User’s Manual D-Link Systems, Inc. Installation Wizard Screen Installation Wizard Screen The following options are available on the Installation Wizard screen by clicking on the corresponding tab: Search: Click to search for any available cameras to connect to the network. Add: Click to...

16 DCS-6620G User’s Manual D-Link Systems, Inc. Installation Wizard Screen Network Settings: Here users can configure the Network Settings for the camera. Enter the IP address, Subnet mask, Default router IP, Primary DNS, and Secondary DNS. Automatically, the option to reset IP address at boot is sel...

17 DCS-6620G User’s Manual D-Link Systems, Inc. Installation Wizard Screen Reset to Default Click the Reset to Default tab to reset the camera’s settings to factory defaults. About Click About to display the current version and date of the Installation Wizard. Exit Click the Exit tab to exit the Ins...

18 DCS-6620G User’s Manual D-Link Systems, Inc. Enabling UPnP TM for Windows ® XP Enabling UPnP for Windows ® XP UPnP TM is short for Universal Plug and Play, which is a networking architecture that provides compatibility among networking equipment, software, and peripherals. The DCS-6620G is a UPnP...

19 DCS-6620G User’s Manual D-Link Systems, Inc. Enabling UPnP TM for Windows ® XP Click Add/Remove Windows Components The following screen will appear: Select Networking Services Click Details Select Universal Plug and Play Click Ok

21 DCS-6620G User’s Manual D-Link Systems, Inc. Enabling UPnP TM for Windows ® XP Click My Network Places To view your DCS-6620G 802.11g PTZ Internet Camera in an Internet browser, go to your Desktop and click My Network Places . Click DCS-6620G-146 The last three digits (146), represent the fourth ...

22 DCS-6620G User’s Manual D-Link Systems, Inc. Installing IP surveillance Software Click Next Real-time Monitoring Video and Audio Recording to hard disk High quality video High compression ratio Maximum of 16 cameras with different monitor layouts Smart playback Triggered event browsing Fast datab...

23 DCS-6620G User’s Manual D-Link Systems, Inc. Installing IP surveillance Software Please read the Software Licensing Agreement and click yes if you wish to accept the agreement. Click “No” to exit the installation. Enter your name and company information and then click “Next”. Click Next Click Yes

25 DCS-6620G User’s Manual D-Link Systems, Inc. Installing IP surveillance Software The installation is complete. Click Finish Click Next

26 DCS-6620G User’s Manual D-Link Systems, Inc. Testing the DCS-6620G The window in the center of your browser is the camera image window. You should now see a video image and hear the audio over your computer speakers from the DCS-6620G . If you are having problems please consult the FAQ section of...

27 DCS-6620G User’s Manual D-Link Systems, Inc. Security When the 802.11g PTZ Internet Camera is used for the first time, it is highly recommended that the Administrator set the Administrator Password to constrain user access to the 802.11g PTZ Internet Camera since the Default settings are Null Stri...

28 DCS-6620G User’s Manual D-Link Systems, Inc. Using and Configuring the DCS-6620G with a Router D-Link’s DCS-6620G is a versatile and cost effective 802.11g PTZ Internet Camera offering both video and audio monitoring. It can also serve as a powerful surveillance system in security applications. Th...

29 DCS-6620G User’s Manual D-Link Systems, Inc. Using and Configuring the DCS-6620G with a Router  View the 802.11g PTZ Internet Camera using your Internet Explorer Web browser Viewing the Video on the browser to test the connection Click on the Configuration button on the left side of the display. S...

30 DCS-6620G User’s Manual D-Link Systems, Inc. Using and Configuring the DCS-6620G with a Router Router Set-Up and Installation The following steps generally apply to any router that you have on your network. The D-Link DI-624 is used as an example to clarify the configuration process. Configure the i...

31 DCS-6620G User’s Manual D-Link Systems, Inc. Using and Configuring the DCS-6620G with a Router Determine Your Router’s IP Address (WAN) Note: Because a dynamic WAN IP can change from time to time depending on your ISP, you may want to obtain a Static IP address from your ISP. A Static IP address i...

33 DCS-6620G User’s Manual D-Link Systems, Inc. Using and Configuring the DCS-6620G with a Router Viewing Your Camera After all settings have been entered correctly, a PC user inside or outside your network will have access to the camera through the Internet Explorer Web browser. To access the camera...

34 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Open your Internet Explorer Web browser and enter the IP address for your 802.11g PTZ Internet Camera.In the example, this address is 192.168.0.120. Your address may differ. If you are following this manual ...

35 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Home Page Screen The image from the DCS-6620G should be visible from the Home page on your computer monitor. To the right of the image are controls that allow you to pan and tilt the camera. Pan and tilt can...

36 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Home Page Screen (continued) The image from the DCS-6620G should be visible from the Home page on your computer monitor. Click on the Client Settings button to change settings related to the connection. Ther...

37 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Home > Client Settings Click the Home tab to return to the DCS-6620G Home page. Protocol Options The UDP Protocol should be chosen for most users. Generally the client computer will automatically try thes...

39 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Configuration > Advanced > Network (continued) Reset IP Address at next boot Once the DCS-6620G is configured, this box should be unchecked at all times. If the box has been checked and the connection is...

40 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser WLAN Configuration Settings (continued) (Service Set Identifier) is a name that identifies your wireless network. Access Points and wireless clients attempting to connect to a specific WLAN (Wireless Local Area ...

41 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Configuration > Advanced > Network (continued) Configuration > Advanced > Mail & FTP Click the Mail & FTP button from the Configuration screen to access video settings that control sending i...

42 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Configuration > Advanced > Mail & FTP (continued) FTP Settings SMTP The domain name or IP address of external mail server. The user name used to log into your e-mail account (e.g. jdoe or jdoe@youri...

44 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Click the DDNS & UPnP button from the Configuration screen to access DDNS & UPnP settings. Configuration > Advanced > DDNS & UPnP Dynamic DNS (DDNS) Dynamic DNS (Domain Name Service) is a met...

45 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Configuration > Advanced > DDNS & UPnP (continued) UPnP UPnP is short for Universal Plug and Play, which is a networking architecture that provides compatibility among networking equipment, software...

46 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Click the Video button from the Configuration screen to access video settings that affect how the video image appears. Configuration > Advanced > Video Select either for color or monochrome video display...

48 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Click the Audio/Video button from the Configuration screen to access video settings that affect how the video image appears. Configuration > Advanced > Audio Click Audio There are five options to select. ...

49 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Recommendations for setting video for the best performance: “Best performance” means the image refresh rate should be the fastest possible and the video quality should be the best possible at the lowest netw...

50 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Recording settings to compromise between real-time and clear images If you have a broadband network, set Fix quality to Good image quality, or higher, instead of setting the Bit rate . Otherwise, fix the bit ...

51 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser You may press to fine-tune the image and see what effect the setting will have on the image. When the image is acceptable, press to store the image settings, or to recall the original settings. If settings ar...

52 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Configuration > Advanced > Motion Detection Click the Motion Detection button from the Configuration screen to access settings that effect how the DCS-6620G PTZ Internet Camera can serve as a security de...

53 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Configuration > Advanced > Motion Detection (continued) Click to add a new window. A maximum of three motion windows can be opened simultaneously. Use your mouse to drag the window frame to resize or th...

54 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Configuration > Advanced > Camera Control Click the Camera Control button from the Configuration screen to access settings that affect how the DCS-6620G 802.11g PTZ Internet Camera can pan and move to pr...

55 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Configuration > Advanced > Camera Control (continued) Current Position: Enter a name for the position at which you would like to preset the DCS-6620G . Click Add to add the new preset position to the Pr...

56 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Configuration > Tools > Admin Click on the Tools tab to access 4 utility screens for controlling and administering the DCS-6620G . The default screen in Tools is the Admin screen. The DCS-6620G is manuf...

57 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser This option allows a user to connect to a camera with view -only privileges. User name is “ demo ”. No password is required. This is useful for demonstrations and keeps guests separate from users with accoun...

58 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Configuration > Tools > System (continued) Adjust the date and time according to what is entered by the administrator. Notice the format in the related field while typing. Synchronize with the NTP server...

59 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Configuration > Tools > Applications Click on the Applications button to access the Applications settings from the Tools menu.

60 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Configuration > Tools > Applications (continued) Select the weekdays that should perform the following operations: Sets the time to stop the operations. Set the time to start operations. Setting the beg...

61 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Any upload action specified in the options above will use the method chosen here. The captured snapshot named “video.jpg” will be attached in the e-mail with subject “Periodic snapshots.” The captured snapsho...

64 DCS-6620G User’s Manual D-Link Systems, Inc. Using the DCS-6620G with an Internet Browser Click on the Help tab to access descriptions of the particular function you need help with. The help screen is organized in the order of the tabs and then each menu item under that tab. Configuration > Hel...

65 DCS-6620G User’s Manual D-Link Systems, Inc. Record Snapshots to your FTP server with Motion Detection Administrators can combine options on the application page to perform many useful security tasks. There are two trigger sources available: from an external sensor or with built-in motion detecti...

66 DCS-6620G User’s Manual D-Link Systems, Inc. Record Snapshots to your FTP server with Motion Detection 1 5 2 4 3 6 John Smith 123.123.123.1 Snapshot Next, click the Mail & FTP button under the Advanced tab to set the FTP server settings for the DCS-6620G . In this window, enter the settings f...

67 DCS-6620G User’s Manual D-Link Systems, Inc. Record Snapshots to your FTP server with Motion Detection 1st FTP password: Specify the password to access the external FTP server (ex. 12345). 1st FTP remote folder: Specify the destination folder in the external FTP server (ex. snapshot). Primary FTP...

69 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Using IP surveillance Software Installing the IP surveillance Software Before you begin installing this application software, the hardware system requirements must be checked first. The minimum system requirements recommen...

74 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Launcher Launcher is a controller program that allows users to invoke Monitor or Playback quickly. System Tray Icon The Launcher icon reflects current state of IP surveillance. The icon in the system tray signifies that the...

75 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software When Launcher is locked, the unlock window will appear, prompting for the user password in order to unlock. The input area of the dialog will be grayed (disabled) for 60 seconds after 3 consecutive failures. User Interfac...

77 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Monitor Program Features of the Monitor Tool Traditional Surveillance Features: Real-time monitoring Recording Pan and Tilt control    Special Features: The digital surveillance system supports not only the features li...

78 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Application Layout and Functionalities This section demonstrates a global view of the monitor tool, shown below. The components of the monitor tool will be introduced in detail in the following sections. Misc. Functions C...

79 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Layout area You can change the monitoring layout in this area. There are six kinds of layouts: 1, 4, 6, 9, 13, or 16 video display frames in the video area.  Hard disk status In this area, you can get the status of the h...

80 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software The Admin Privilege In the monitor tool system, the admin privilege has the right to access the DCS-6620G 802.11g PTZ Internet Camera through this application software and change the local settings as well. But the admin ...

81 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software The Layout of the Configuration This section discusses the local settings for the connection and the functional configuration of each camera. If you are interested in the remote settings for each camera, you can refer to th...

82 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Insert – To insert a remote 802.11g PTZ Internet Camera to the camera list. Click the “Insert” button, an “Insert New Channel” dialog will popup, as shown below. Specify the IP address, port, and admin password of the 802...

83 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Delete – Removes the selected 802.11g PTZ Internet Camera from the camera list. Highlight the camera that you want to delete from the list and click on the “Delete” button. The selected camera will be deleted. History – C...

84 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Alert Settings: Specific alert actions can be performed by setting the options in this window. Enable motion detect This will trigger an alert sound that has been specified in the section titled “Global Settings \ Alert Sou...

85 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Changing the Camera Order in the List You can apply “drag and drop” in the grid area of the camera list to change the sequence of the connected Internet Cameras, which is shown below. This will enable you to rearrange the...

86 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Global Settings After completing the connection for each remote 802.11g PTZ Internet Camera, we need to configure some global settings for all the cameras. These include the video database directory, the usage of the Hard ...

88 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software  Display Options: In the video displaying frame of each channel, there are two status bars. The upper bar contains “Camera location” and “time of the remote site.” The lower bar contains “Connection time” and “Recording ...

89 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Monitor Program (continued) Backup Settings: Using Backup Settings in the global settings window, you can backup recorded data from selected cameras to a specified location. Directory This is the directory where backup dat...

90 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software This section depicts, in detail, how to manipulate the monitor tool. Using the Monitor Program Connection of the DCS-6620G Channel: Once you have the privilege to connect to the DCS-6620G , the cameras will automatically ...

91 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Monitor Program (continued) If you do not want to monitor one video, you can drag and drop the video (in the video area) to the trashcan in the common control area of the monitor program. The following section will demons...

93 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Monitor Program (continued) Video shown Empty video box Removing video from a display window Step 1: Move the mouse cursor to the display window that contains the video channel you wish to remove. Step 2: Note that the cu...

94 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Press and hold the left mouse button here. Move the mouse cursor here, and then release the left mouse button. The Layout 4 camera layout 9 camera layout 1 camera layout 6 camera layout 13 camera layout 16 camera layout M...

96 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Back Back to previous layout. Monitor Program (continued) Input/Output Control Tools Digital Input/Digital Output Alert Message Pan/Tilt control To view an individual camera from the multi-camera layout, double-click on t...

97 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software IP surveillance includes pan/tilt control, DI/DO (Digital Input / Digital Output) control, and an alert message receiver. Each of these are described in detail below. DI/DO Control Clicking on the “DI/DO” button shown bel...

98 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Monitor Program (continued) Alert Message If you have checked the box for “Enable Motion Detect” or “Enable Digital Input” on “Camera Configurations > Alert Settings“ screen, the alert message will show in the window sh...

99 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software About Miscellaneous Functions Full Screen Quit Minimize Stop Alert Sound Configuration Menu This section will describe some other miscellaneous functions of the icons shown above. These functions are: Quit By clicking this...

100 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Full Screen With this function, you can enlarge the selected video channel to a full-screen display. Press the “ESC” key on the keyboard or double-click the mouse on the screen to return to a regular display. Configuratio...

101 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Record By clicking on this button, you can record video of the selected channel manually. Printer Click on the printer icon to print the current image to your default printer. Trashcan You can drag and drop the video cha...

102 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Scheduling  Friendly graphic user interface for schedule editing  Flexible schedule scheme suitable for all applications  Individual schedule for each video channel  Supports up to 9 preset schedule schemes for each ...

104 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Video channel IP address Location Scheduling (continued) The layout of the scheduler is roughly divided into 4 parts: Part 1 The first part of the scheduler is the video channel selection area. It provides the IP addresse...

105 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Scheduling (continued) In this area you will select the video channel that you want to set a schedule for. Each video channel will display a name, IP address, and location. Please note that when you switch between video ...

106 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Scheduling (continued) Hour Time-Line In the figure below, the Hour time-line is displayed. Marking/Unmarking the Recording Time on the Hour Time-Line You can apply the one-click function by clicking the left mouse button...

107 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Scheduling (continued) Apply and Erase Buttons After you have selected the time period with “Begin time” and “End time” picker, you can apply the period picker, shown in the figure below, to set the periodical types of th...

108 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Scheduling (continued) Digital Input In the figure above, there are four conditions for the digital input. Check the condition that you would like to record while the condition triggers. Schedule modes If you select Conti...

109 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Scheduling (continued) The Schedule Scheme operations There are six related buttons. “Load…”, “Undo”, “Clear”, “Save”, “Save as…” and “Close” for handling the schedule schemes. These operations are shown in the figure bel...

110 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program The playback program is a very powerful, convenient, and easy way to browse the recorded video. It has one display mode (normal display mode) and two playback methods (full range and time period). There ...

112 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Playback method Display adjustment tool When you successfully log in to the playback system, the main window will be shown on the top of the screen and the display resolution will be changed ...

113 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Histogram Area The histogram is an interactive control. Not only can you get the event’s location in time domain and its quantity of the motion percentage, but you can also select a group of ...

114 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Lock Windows Settings Minimize Exit Pull Bar The pull bar is a fast, flexible control for seeking data in the selected time period. It represents the total length of time in that period. You c...

115 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Database location The most important item in the settings dialog is the database location setting. You must set it to the directory that contains the surveillance database to make the program...

117 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Histogram Area Dark Region Inverted region The histogram area in the normal display (single frame) mode only shows the events’ occurred time and the percentage of motion detection with red ba...

118 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Location selector Period selector Playback method selector Alert area selector Location Selector The location selector is a control that lets you select the camera you want to see (refer to t...

119 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Playback Method Selector Full Range If you select this method, the database will be displayed from the beginning to the end of this location. Any change in the period selector will have no ef...

120 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Play The supported “Play” button is an intelligent play user-interface. The functionality of this button can vary to fit different circumstances. In the normal display mode, clicking on the “P...

121 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Playback Program (continued) Display Adjustment Tool When you move the mouse cursor to the displaying area, the display adjustment toolbox will appear. Using the display adjustment toolbox, you can change the displaying ...

123 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Zoom Out Playback Program (continued) Lock Window Each time you click on the “Zoom Out” button in the searching range adjustment toolbox, the displayed time period will be double in the center of the original time period...

124 DCS-6620G User’s Manual D-Link Systems, Inc. Using IP surveillance Software Settings Playback Program (continued) The settings dialog will pop up when you click the “Settings” button. For more information about setting this program, please refer to the section titled “Settings.” Minimize Click t...

125 DCS-6620G User’s Manual D-Link Systems, Inc. Schedule Video Recording with Motion Detection Schedule Video Recording with Motion Detection Next, run the IP surveillance program. Click on the Configurations button and select Scheduler .  Check “Enable motion detection.”  Click on “New” to have a...

128 DCS-6620G User’s Manual D-Link Systems, Inc. Frequently Asked Questions 802.11g PTZ Internet Camera Features Q: What is an 802.11g PTZ Internet Camera? A: The 802.11g PTZ Internet Camera is a stand-alone system connecting directly to an Ethernet, Fast Ethernet, or wireless network. It differs fr...

129 DCS-6620G User’s Manual D-Link Systems, Inc. Frequently Asked Questions Q: Can the 802.11g PTZ Internet Camera be setup as a PC-cam on a computer? A: No, the 802.11g PTZ Internet Camera is used only on an Ethernet or Fast Ethernet network. The D-Link DSB-C110, DSB-C310, can be used as a PC Camer...

130 DCS-6620G User’s Manual D-Link Systems, Inc. Frequently Asked Questions Q: Noisy images occur. How can I solve the problem? A: The video images might be noisy if the 802.11g PTZ Internet Camera is used in a very low light environment. To solve this issue you need more lighting. Q: I connected th...

131 DCS-6620G User’s Manual D-Link Systems, Inc. How to Ping Your IP Address How to PING Your IP Address The PING (Packet Internet Groper) command can determine whether a specific IP address is accessible by sending a packet to the specific address and waiting for a reply. It can also provide a very u...

132 DCS-6620G User’s Manual D-Link Systems, Inc. Reset and Restore There is a button hidden in the pinhole beside the Ethernet socket. It is used to reset the system or restore the factory default settings. Sometimes resetting the DCS-6620G will return the system back to a normal state. If the syste...

133 DCS-6620G User’s Manual D-Link Systems, Inc. External I/O Port External I/O Port 1 DI+ INPUT (Max. 50mA, 12VDC) 2 DI- INPUT (Initial state of DI is low) 3 SW_COMMON OUTPUT (open from SW_OPEN at initial state) (close with SW_OPEN when set DO to ON) 4 SW_NOPEN OUTPUT (Max. 1A, 24VDC or 0.5A, 125VA...

134 DCS-6620G User’s Manual D-Link Systems, Inc. External I/O Port The above diagram shows a typical wiring configuration for a normally closed PIR motion sensor. Please refer to your specific motion sensor for the power supply connection to the device since this will be critical to the success of you...

137 DCS-6620G User’s Manual D-Link Systems, Inc. Technical Specifications Remote management Configuration and system log can be accessed via Web browser, using Internet Explorer 5.X and above, and FTP application remotely Networking Protocol TCP/IP, HTTP, SMTP, FTP, Telnet, NTP, DNS, and DHCP Networki...

139 DCS-6620G User’s Manual D-Link Systems, Inc. Contacting Technical Support Contacting Technical Support Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for ...

140 DCS-6620G User’s Manual D-Link Systems, Inc. Time Zone Table Time Zone Table GMT stands for Greenwich Mean Time, which is the global time that all time zones are measured from.

142 DCS-6620G User’s Manual D-Link Systems, Inc. Warranty Warranty

145 DCS-6620G User’s Manual D-Link Systems, Inc. Registration 05/03/05 Registration