CyberPower CPS1500AVR - Manuals

Page 2 - TABLE OF CONTENTS; Power; Cyber

TABLE OF CONTENTS Thank you for purchasing a Power Systems product. To enjoy all the features and benefits of this Uninterruptible Power System (UPS), please read and follow all installation and operation instructions completely. This UPS is designed to provide guaranteed power protection for connec...

Page 3 - Guaranteed Uninterruptible Power System; DESCRIPTION; Using Battery Indicator

CPS1500AVR Guaranteed Uninterruptible Power System DESCRIPTION 1. Power Switch Can be used as a master on/off switch for equipment connected to the UPS. 2. Test Switch Press this switch to run a self-test. 3. Battery Capacity/ Load Indicator These indicators show a visual indication of the battery c...

Page 4 - INSPECTION; The box should contain the following:; HOW TO DETERMINE THE POWER REQUIREMENTS OF YOUR EQUIPMENT; recharging the battery for at least four hours; is recommended; Items; . The power demands of these devices will overload

2 INSPECTION The box should contain the following: TM TM (1) PowerPanel Plus Software Disk;(1) PowerPanel Software Disk; (2) Serial Interface Cable (DB-9); (1) Telephone Cable; (1) User Manual;(1) Warranty Registration Card; (1) UPS Unit; (2) Rack mount Brackets; (2) Stands. HOW TO DETERMINE THE POW...

Page 6 - POWERPANEL PLUS SOFTWARE INSTALLATION GUIDE; primary; and then click on; Power Options; then click on the; UPS tab

TM POWERPANEL PLUS SOFTWARE INSTALLATION GUIDE (Note: Use of the software is optional. The unit will provide surge suppression and battery TM backup without using the software. PowerPanel Plus should be used on the primary computer) FOR WINDOWS 95/98/Me 1. Turn the UPS off and unplug it.2. Connect t...

Page 7 - point to

8. Windows will find new hardware. TM 9. Insert the PowerPanel Plus (Primary) disk into the floppy drive.10. Follow the on-screen instructions.11. Once the software has finished installing, remove the floppy disk and restart your computer. TM When your computer restarts, the PowerPanel Plus software...

Page 8 - POWERPANEL PLUS SOFTWARE USER MANUAL; - Click to open the

9. Connect the serial interface cable to the UPS and an open serial port on the back of the computer. You must use the serial cable that was provided with the unit.10. Plug the UPS into and AC outlet, turn the UPS on and start your computer.11. Click on Start , point to Settings , and then click Con...

Page 11 - POWERPANEL INSTALLATION GUIDE

5. Clear - Clears the selected item from the schedule. 6. Add - Adds an item to the schedule. 7. OK - Exits the window. Please note: You must click Add to add the item to the schedule. 8. Turn Off - Select the day/date/time that you want the system to shutdown. This is optional and has no effect on ...

Page 12 - then click on; then click

FOR WINDOWS NT 1. Click on Start , point to Settings , then click Control Panel . 2. Double-click the UPS Icon . 3. Remove the checkmark from the box labeled UPS is installed on . Click OK 4. Acknowledge the message that the UPS is in an unknown state and exit to the desktop.5. Shutdown your compute...

Page 15 - DEFINITIONS FOR LED INDICATORS

Power On Wiring AVR Using Circuit Alarm Condition Fault Battery Breaker On Off Off Off Set Off Normal On Off Flash Off Set Off AVR - Max. boost 15% of input voltage for output regulation while input voltage is from 8% to 30% under nominal. On Off On Off Set Off AVR - Max. buck 15% of input voltage f...

Page 20 - Avenue East

FCC Notice This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and c...