CyberPower CP-H420MP - Manuals

Page 3 - Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . 2Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Specifications - USB Battery Powered Hub . . . . . . . . . 3Specifications ...

Page 4 - Introduction

USB (Universal Serial Bus) is currently the standard for most computers, notebooks and peripherals. The USB connections allow the user to easily connect multiple devices. Cyber Power's USB 2.0 4-Port Mobile Battery Powered Hub (Model CP-H420MP) provides additional ports to connect up to 4 USB device...

Page 5 - This package includes:

Any PC or Macintosh computer with an available USB port and USB-compliant operating system (Windows 98SE/ 2000/ ME/ XP, MacOS 8.6 or above, etc.) NOTE: To use this USB hub with Windows 98 operating system, please visit http://www.cyberpowersystems.com and download the appropriate software driver bef...

Page 6 - Battery Powered Hub

Page 7 - Specifications; Rechargeable Battery

Specifications Specifications - Rechargeable Battery 4 Note: Please charge before use. The batteries are delivered in an uncharged state.

Page 8 - Product Overview

Product Overview Model CP-H420MP 1 2 3 5 5 6 7 4 5 4

Page 9 - Product Overview - continued

Product Overview - continued 1) Power Indicator - Blue LED will illuminate when USB Hub is receiving power. 2) Battery Power Switch - Switch on battery power switch when extra power is needed for connected USB devices. This switch activates self-power mode. 3) Battery Discharge Indicator - Red LED w...

Page 11 - First Use - Charge Batteries

When using this Hub the first time, charge the Ni-MH batteries at least 6 hours . 1) Insert the included batteries (4) into the Hub. 2) Plug the USB connector into an unused USB port on your computer. 3) Make sure that the Battery Power Switch is in the OFF position and your computer is ON. Batterie...

Page 12 - Installation

Installation This USB Hub is a plug-and-play device. Your computer will display the Add New Hardware Wizard after connecting the hub. The Add New Hardware Wizard will install the Cyber Power USB Hub automatically. It is not necessary to restart your computer after installation. To use this USB hub w...

Page 13 - Installation - continued

Installation - continued Self-Powering the Hub: Using Battery Power: If the connected devices work properly, keep the Battery Power SwitchOFF in order to conserve battery power! If the connected devices function erratically or require additional power, turn the Battery Power Switch ON to activate Se...

Page 14 - Appendix A; Troubleshooting

Appendix A Troubleshooting Problem Possible Cause Action Unit operateserratically. Static electricity may causethe Hub to behaveerratically. Reset the Hub by disconnecting it fromyour computer. Wait five seconds, thenreconnect. USB devices operateerratically or can't bepowered on. Connected USB devi...

Page 15 - Appendix B

Radio & TV Interference Statement This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This e...

Page 16 - Appendix C

Appendix C Lifetime Limited Warranty Cyber Power warrants this USB Hub (the Hub ) (excluding rechargeable Ni-MH battery) to be free from defect in material or manufacture for its lifetime. If a defect results in product failure during its normal use, Cyber Power's sole responsibility is to repair or...

Page 17 - Appendix C - continued

14 Appendix C - continued Cyber Power will inspect and examine the Hub. If the Hub is defective in material or workmanship, Cyber Power will repair or replace it and return it to you at Cyber Power's expense at the place you have indicated. Contact Information: Cyber Power Systems (USA), Inc. 5555 1...