Cub Cadet 190-678-100 - Manuals

Page 2 - TABLE OF CONTENTS; FINDING MODEL NUMBER; CALLING CUSTOMER SUPPORT

2 TABLE OF CONTENTS Content Page Important Safe Operation Practices................................................................... 3 Loose Parts ....................................................................................................... 6 Assembly & Operation .......................

Page 3 - SECTION 1: IMPORTANT SAFE OPERATION PRACTICES; General Operation

3 SECTION 1: IMPORTANT SAFE OPERATION PRACTICES General Operation 1. Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts. 2. B...

Page 5 - General Service; Your Responsibility

5 or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling. c. When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable ...

Page 6 - SECTION 2: LOOSE PARTS

6 SECTION 2: LOOSE PARTS The grass catcher kit is shipped with following loose parts in the carton. Please remove all loose parts from the carton before discarding it. Compare with Figure 1 to check that no parts are missingfrom the kit or have been misplaced during unpacking. Figure 1 The loose par...

Page 7 - Mounting Bracket Assembly; Attaching the Grasscatcher Cover and Bags

7 SECTION 3: ASSEMBLY & OPERATION NOTE: References to LEFT, RIGHT , FRONT and REAR of the tractor are from the operator’s position. • Before assembly, place the tractor on a firm and level surface, disengage the PTO, stop the tractor engine and set the parking brake. Mounting Bracket Assembly NO...

Page 8 - Attaching the Discharge Chute

8 • Attach the grass bags using the slots shown in Figure 5. Close the grasscatcher cover. Attaching the Discharge Chute • Raise the deck to its highest position. • On older models: Remove the clip, if already installed on the deck next to the discharge chute opening, by removing the lock nut, sprin...

Page 9 - Attaching Blades; Operation

9 Attaching Blades (Model 190-678 only) Remove the blades from your tractor’s cutting deck as follows. • Remove the cutting deck from beneath the tractor, (refer to Deck Removal in the Maintenance section of your tractor’s operator’s manual for detailed instructions) then gently flip the deck over t...

Page 10 - SECTION 4: PARTS LIST

10 SECTION 4: PARTS LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20* 21* 23 24 25 26 27 11 5 10 * Model 190-678 only

Page 12 - MANUFACTURER’S LIMITED WARRANTY FOR:

MANUFACTURER’S LIMITED WARRANTY FOR: The limited warranty set forth below is given by Cub Cadet LLC with respect to new merchandise purchased and used in the United States, its possessions and territories. Cub Cadet LLC warrants this product against defects for a period of two (2) years commencing o...