Cub Cadet 190-192-190 - Manuals

6 SECTION 2: LOOSE PARTS The grass catcher kit is shipped with following loose parts in the carton. Please remove all loose parts, including the hardware pack, from the carton before discarding it. Compare with Figure 1 to check that all parts were included. Note that the kit and the hardware pack c...

7 SECTION 3: ASSEMBLY & OPERATION NOTE: References to left, right , front and rear of the tractor are from the operator’s position, unless otherwise stated. • Before assembly, place the tractor on a firm, level surface, disengage the PTO, stop the tractor engine and set the parking brake. • For ...

8 • Remove the cutting deck from beneath the tractor (refer to instructions for Deck Removal in your tractor’s operator’s manual), then gently flip the deck over to expose its underside. • Place a block of wood between the center deck housing baffle and the cutting blade to act as a stabilizer. See ...

9 Figure 8 Figure 9 • Insert the lower end of the chute tube over the discharge chute so that its two notches fit into the two corresponding notches on the discharge chute. See Figure 9. • Secure by placing the ends of the two short retainer straps on the discharge chute over the pins on the chute t...

MANUFACTURER’S LIMITED WARRANTY FOR: The limited warranty set forth below is given by Cub Cadet LLC with respect to new merchandise purchased and used in the United States, its possessions and territories. “Cub Cadet” warrants this product against defects in material and workmanship for a period of ...