Page 2 - Welcome & Congratulations; may not; Product Registration; Crosley Corporation; PLEASE CAREFULLY READ AND SAVE THESE INSTRUCTIONS; Important Safety Instructions
2 Read all instructions before using this appliance. Save these instructions for future reference. This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given. This symbol will help alert you to situations that may cause ser...
Page 4 - Oven Vent Location; Before Setting Oven Controls; Element ON & Hot Surface Indicator Lights
4 Arranging Oven Racks ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TOOPERATING THE OVEN). Always use oven mitts when using the oven. Removing & Replacing Oven Racks To remove , pull the rack forward until it stops. Lift up front of rack and slide out. To replace , fit the rack onto th...
Page 5 - To Set the Clock; or; To Set the Minute Timer:; Oven Control Functions; To Change the Minute Timer while it is in use:; Arranging Oven Racks
5 Before Setting Oven Controls To Set the Clock When the range is first plugged in, or when the power supplyto the range has been interrupted, the display will flash "12:00". 1. Press . 2. Within 5 seconds, press and hold the or until the correct time of day appears in the display. To Set th...
Page 6 - Setting Surface Controls; o Operate Radiant Surface Elements; Suggested Surface Control Settings; FFFFF
6 Setting Surface Controls Fig. 1 1. Place correctly sized cookware on the radiant surface element. 2. Push in & turn the surface control knob in either direction to the desired setting (SeeFig.1). Start most cooking operations on a higher setting & then turn to a lowersetting to finish cook...
Page 7 - Setting Oven Controls; Broiling
7 Setting Oven Controls The broiler pan & the insert (somemodels) allows grease to drain and bekept away from the high heat of thebroiler. DO NOT use the pan without the insert. DO NOT cover the insert with foil; the exposed grease could ignite. Broiling 1. Arrange oven rack while oven is still ...
Page 9 - How to Clean; General Care & Cleaning
9 Oven Racks Oven Door Remove racks. See "Removing & Replacing Oven Racks" under Before Setting Oven Controls . Use a mild, abrasive cleaner, following the cleaner’s recommendations. Rinse with clean water &let dry. After cleaning the racks, rub the sides of the racks with wax paper ...
Page 11 - Changing the Interior Oven Light; To replace the oven light:; Care & Cleaning of Stainless Steel; Special Caution for Aluminum Use on the Ceramic Cooktop; • Aluminum utensils -
11 Changing the Interior Oven Light (some models) On some models, the oven light automatically turns on when the door is opened. Somemodels have a switch located on the control panel to turn on the light. The oven light islocated at the rear of the oven. To replace the oven light: 1. Turn electrical...
Page 12 - Removing & Replacing the Oven Door; To Replace Oven Door:
12 Fig. 3 Removing & Replacing the Oven Door The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down. To Remove Oven Door: 1. Open oven door completely (horizontal with floor - See Fig. 1). 2. Remove 2 screws located on the inside of the oven doo...
Page 13 - Before You Call
13 Metal marks (Ceramic Cooktop models) - Sliding or scraping of metal utensils on cooktop surface. Do not slide metalutensils on cooktop surface. Use a ceramic-glass cooktopcleaning creme to remove the marks. See "Cooktop Cleaningand Maintenance" in the Care & Cleaning section. Scratche...
Page 14 - Notes
Page 16 - Major Appliance Warranty Information
This warranty does not cover the following: 1. Products with original serial numbers that have been removed, altered or cannot be readily determined. 2. Product that has been transferred from its original owner to another party or removed outside the USA orCanada. 3. Rust on the interior or exterior...