Craftsman 82170- Manuals

5 SAFETY SYMBOLS This symbol adjacent to another symbol, terminal or operating device indicates that the operator must refer to an explanation in the Operating Instructions to avoid personal injury or damage to the meter. This WARNING symbol indicates a potentially hazardous situation, which if not ...

7 SPECIFICATIONS Function Range Resolution Accuracy 2nF 1pF 20nF 10pF 200nF 0.1nF 2µF 1nF Capacitance 20 # F 10nF " (4.0% reading + 3 digits) 20kHz 10Hz " (1.5% reading + 10 digits) Frequency Sensitivity: 200mVac RMS to 10Vac RMS 0 to 32 % F " (5.0% reading + 5 digits) 32 to 750 % F "...

9 OPERATING INSTRUCTIONS WARNING : Risk of electrocution. High-voltage circuits, both AC and DC, are very dangerous and should be measured with great care. 1. ALWAYS press the POWER switch to the OFF position when the meter is not in use. 2. If “1” appears in the display during a measurement, the va...

15 MAINTENANCE WARNING : To avoid electric shock, disconnect the test leads from any source of voltage before removing the back cover or the battery or fuse doors. WARNING: To avoid electric shock, do not operate your meter until the battery and fuse doors are in place and fastened securely. This Mu...

17 TROUBLESHOOTING There may be times when your meter does not operate properly. Here are some common problems that you may have and some easy solutions to them. Meter Does Not Operate: 1. Always read all the instructions in this manual before use. 2. Check to be sure the battery is properly install...