Craftsman 8-Drawer- Manuals

1/4 - 20 Nut (Qty: 16) 1/4 - 20 x 5/8-in (Qty: 16) Caster pack Release • Empty the drawer. • Fully extend the drawer. removiNG DraWers Lever style - Lift or lower (depending on the slide) the release lever on both sides, (this allows the slides to ride over the stops.) Pull out to remove. cartoN coN...

process: • Remove bottom drawers. • Lay the cabinet on its back. Use packaging material to protect the finish. • Mount both swivel casters on the same side of the unit. • Attach the casters using four screws and nuts per caster. • wrench tighten all screws. it is recommended not to exceed 80 inch po...

cabinets: • For units with a lock, insert the locking bar into the slot in the center of the base. Move the locking bar toward the unit until the other end fits into the slot in the top next to the lock. Lock with the key. • To unlock, reverse the procedure. • Remove key. LocKiNG tHe uNit • To remov...