Page 2 - WARNING; GASOLINE CHAIN SAW
TABLE OF CONTENTS Warranty Page 2 Safety Rules Pages 3 - 8 Oil and Fuel Information Page 9 Starting/Stopping Instructions Pages 10-12 Operation Pages 13 - 14 ONE YEAR LIMITED WARRANTY ON CRAFTSMAN GAS CHAIN SAW For one year from the date of purchase, when this Chain Saw is used and maintained accord...
Page 3 - KICKBACK SAFETY PRECAUTIONS; RULES FOR SAFE OPERATION; • IMPORTANT SAFETY INSTRUCTIONS •
RULES FOR SAFE OPERATION • Avoid accidental starting. Be in the starting position whenever pulling the starter rope. The operator and unitmust be in a stable position while starting. SeeStarting/Stopping Instructions. • Before you start the engine, make sure the area around the saw is clear. Never t...
Page 5 - SAFETY AND INTERNATIONAL SYMBOLS; OTHER SAFETY PRECAUTIONS; TIONS
RULES FOR SAFE OPERATION SAFETY AND INTERNATIONAL SYMBOLS This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating and maintenance and repair information. SYMBOL MEANING • SA...
Page 7 - and back toward the operator.; KICKBACK SPECIFICS; SAFETY FEATURES
A B B C B A A A RULES FOR SAFE OPERATION KICKBACK SPECIFICS KICKBACK may occur when the NOSE or TIP of theguide bar touches an object, or when wood closes in andpinches the saw chain in the cut. Tip contact in some cases may cause a lightning-fastreverse reaction, kicking the guide bar up and backto...
Page 9 - STARTING/STOPPING INSTRUCTIONS; BEFORE STARTING ENGINE; OIL AND FUEL INFORMATION; OIL AND FUEL MIXING INSTRUCTIONS; Definition of Blended Fuels
STARTING/STOPPING INSTRUCTIONS Operate this unit onlyin a well-ventilatedoutdoor area. Carbon monoxide exhaust fumes can be lethal in aconfined area. WARNING: Never operate the sawwithout the bar andchain properly installed. WARNING: WARNING: Be sure to read the Oil and Fuel Information Section of t...
Page 11 - CHAIN BRAKE TEST; Chain Lubrication; STOPPING INSTRUCTIONS; STARTING A COLD ENGINE
Fig. 8 Fig. 9 Activate the CHAINBRAKE® slowly and deliberately. Keep the chain from touchinganything; don’t let the saw tip forward. WARNING: If chain does notstop, turn engine off and take your unit to the nearest AuthorizedService Center for service. WARNING: Fig. 10 Fig. 11 A C B D CHAIN BRAKE TE...
Page 13 - LIMBING; OPERATING INSTRUCTIONS; FELLING
OPERATING INSTRUCTIONS Fig. 15 A LIMBING Limbing a tree is the process of removing the branchesfrom a fallen tree. Do not remove supporting limbs (A) untilafter the log is bucked (cut) into lengths (Fig. 16).Branches under tension should be cut from the bottom upto avoid binding the chain saw. BUCKI...
Page 15 - REPLACING; MAINTENANCE AND REPAIR INSTRUCTIONS; CUSTOMER RESPONSIBILITY
REMOVING GUIDE BAR AND CHAIN NOTE: Always wear heavy gloves when handling the saw chain. 1. Make sure the Chain Brake® lever is pulled back into the DISENGAGED position (Fig. 21). Remove barretaining nuts with supplied multi-purpose tool (Fig.22). 2. Remove chain brake cover (C, Fig. 22) and outer g...
Page 17 - SAW CHAIN TENSION ADJUSTMENT; TOO; CHAIN BRAKE MECHANICAL TEST
AIR FILTER 1. Remove the top cover (A) by loosening the cover retaining screws. Cover will lift off (Fig. 31). 2. Clean air filter. Wash filter in clean, warm, soapy water. Rinse in clear, cool water. Air dry completely. NOTE: It is advisable to have a supply of spare filters. 3. Install air filter....
Page 19 - Sprocket Tip Lubrication
MAINTENANCE AND REPAIR INSTRUCTIONS STORING A CHAIN SAW Storing a chain saw for longer than 30 days requires stor- age maintenance. Unless the storage instructions are fol- lowed, fuel remaining in the carburetor will evaporate, leaving gum-like deposits. This could lead to difficult start- ing and ...
Page 21 - TROUBLESHOOTING; GUIDE BAR MAINTENANCE:; INERTIA CHAIN BRAKE® ACTION
TROUBLESHOOTING NOTE: For repairs beyond the minor adjustments listed above, contact your nearest Sears Parts & Repair center at (1-800-4-MY-HOME ® ) or other qualified service dealer for an adjustment. C A U S E A C T I O N 1. Incorrectly gapped spark plug 1. Clean/gap or replace plug 2. Plugge...
Page 25 - EPA Emission Control Warranty Statement; Your Warranty Rights and Obligations
26 25 California / EPA Emission Control Warranty Statement Your Warranty Rights and Obligations The California Air Resources Board, The Environmental Protection Agency and Sears, Roebuck and Co., are pleased toexplain the emission control system warranty on your 2005 and later small off-road engine....
Page 27 - NOTA SOBRE EL ASPIRADOR DE CHISPAS; AVISO; Con
ÍNDICE Garantía Página 28 Reglas de seguridad Páginas 29 - 34 Información sobre combustible y engrase Página 35 Instrucciones de arranque/parada Páginas 36 -38 Funcionamiento Páginas 39 - 40 UN AÑO DE GARANTÍA LIMITADA SOBRE LA SIERRA MECÁNICA DE GASOLINA CRAFTSMAN Durante un año desde la fecha de c...
Page 29 - MANEJE EL COMBUSTIBLE CON CUIDADO; OPERE SU SIERRA DE FORMA SEGURA; REGLAS DE FUNCIONAMIENTO SEGURO; • INSTRUCCIONES IMPORTANTES DE SEGURIDAD •
REGLAS DE FUNCIONAMIENTO SEGURO • Evite el encendido por accidente. Colóquese en posi- ción de arranque al tirar de la cuerda de inicio. El oper-ador y la unidad deberán estar en posición estable alarrancar. Consulte las instrucciones deArranque/Parada. • Antes de arrancar el motor, asegúrese de que...
Page 31 - GUARDE ESTAS INSTRUC-
REGLAS DE FUNCIONAMIENTO SEGURO SEGURIDAD Y SÍMBOLOS INTERNACIONALES Este manual del usuario describe los símbolos de seguridad internacionales que pueden aparecer en este producto. Lea elmanual del usuario para obtener información sobre seguridad, ensamblaje, funcionamiento y mantenimiento. SÍMBOLO...
Page 33 - ESPECIFICACIONES DE REACCIÓN; CARACTERÍSTICAS DE SEGURIDAD
A B B C B A A A REGLAS DE FUNCIONAMIENTO SEGURO ESPECIFICACIONES DE REACCIÓN Pueden darse REACCIONES cuando la PUNTA o el LADOde la guía toque un objeto, o al acercarse a la Madera y lacadena comience el corte. El contacto lateral puede causar en algunos casos unareacción inversa, golpeando la barra...
Page 35 - INSTRUCCIONES DE MARCHA/PARADA; ANTES DE ARRANCAR EL MOTOR; INFORMACIÓN SOBRE GASOLINA Y ENGRASE; MEZCLA DE GASOLINA Y ENGRASE
INSTRUCCIONES DE MARCHA/PARADA Opere estaunidad enuna zona bien ventilada. Los vapores de monóxido decarbono pueden ser letales en zonasconfinadas. ADVERTENCIA: Nuncaopere lasierra sin la barra y la cadena instaladas correctamente. ADVERTENCIA: ADVERTENCIA: Asegúrese de leer la sección Información s...
Page 37 - Lubricado de la Cadena; INSTRUCCIONES DE PARADA
Fig. 8 Fig. 9 Fig. 10 Fig. 11 A C B D 9. Si la unidad al ralentí vacila, existe un orificio de ajuste de ralentí (L) (Fig. 8). Utilizando un destornilladorPhillips o plano, gire el tornillo 1/4 o 1/2 vuelta hacia laderecha. Así conseguirá ajustar el ralentí de formaadecuada (Fig. 9). NOTA: Si la cad...
Page 39 - PELAR; TROCEAR UTILIZANDO UN CABALLETE; INSTRUCCIONES DE FUNCIONAMIENTO; CAÍDA
INSTRUCCIONES DE FUNCIONAMIENTO Fig. 15 A PELAR Pelar un árbol es el proceso de quitar las ramas de un árbolcaído. No quite las ramas de soporte (A) hasta después deque el tronco haya sido cortado en trozos (Fig. 16). Debe cor-tar las ramas en tensión de abajo arriba para evitar que seatasque la sie...
Page 41 - REEMPLAZAR LA BARRA Y LA CADENA; INSTRUCCIONES DE MANTENIMIENTO Y REPARACIÓN; RESPONSABILIDAD DEL CLIENTE
QUITAR LA BARRA DE GUÍA Y LA CADENA NOTA: Use siempre guantes gruesos al manipular la sierra. 1. Asegúrese de que la palanca del Freno de cadena(r) está hacia atrás en la posición DESACTIVADA (Fig. 21). Quitelas tuercas de la barra con la herramienta suministrada(Fig. 22). 2. Quite la funda del fren...
Page 43 - AJUSTE DE TENSIÓN DE LA SIERRA MECÁNICA
FILTRO DE AIRE 1. Quite la tapa superior (A) aflojando los tornillos de sujec- ción. La cubierta se soltará (Fig. 31). 2. Limpie el filtro del aire con agua caliente y jabón. Enjuáguelo con agua limpia. Deje secar al aire. NOTA: Se aconseja tener filtros de repuesto. 3. Instale el filtro del aire. I...
Page 45 - Lubricado del engranaje
INSTRUCCIONES DE MANTENIMIENTO Y REPARACIÓN ALMACENAR LA SIERRA Almacenar una sierra mecánica durante más de 30 díasrequiere que se sigan las instrucciones de almacenamiento. Amenos que se sigan las instrucciones, el combustible rema-nente se evaporará, dejando depósitos gomosos. Esto podríaconducir...
Page 47 - RESOLUCIÓN DE PROBLEMAS
RESOLUCIÓN DE PROBLEMAS NOTA: Para realizar reparaciones más grandes, póngase en contacto con su centro de servicio de Sears más cercano en (1-800-4-MY-HOME®) u otro centro autorizado. A C C I Ó N 1. Cambie el filtro de combustible 2. Muévala a la posición 3 3. Cambie la pantalla 4. Quite, limpie y ...
Page 49 - LISTA DE COMPONENTES; ESPECIFICACIONES
LISTA DE COMPONENTES Ítem 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 N. Componente 9NAB-5/16-24 9228-31B206 9157-310201 9DB-620201 9SREB-10/24-2.75 9WFB-0.2 9072-310201F 9221-310001 9228-310203F 9155-310201 9076-310201 9228-310208 9154-310201 9SKKBY8/16...
Page 51 - Acuerdo de Protección de Reparaciones; Servicio de Instalación de Sears; Declaración de Garantía de Control de Emisiones EPA / California; Sus derechos y obligaciones de garantía
52 Acuerdo de Protección de Reparaciones Le felicitamos por su compra inteligente. Su nuevo produc-to Craftsman® ha sido diseñado y fabricado para duraraños en funcionamiento. Pero como todos los productos,puede necesitar reparaciones de vez en cuando. Es elmomento de que un Acuerdo de Protección de...
Page 53 - En su casa; no importa quien lo haya fabricado o quien se lo haya vendido.; Para componentes de repuesto, accesorios y manuales de usuario; En nuestra casa; Para reparaciones de artículos portátiles como aspiradoras,; Centro de reparacin y Servicio Sears ms cercano.; Para pedir servicio de reparación
Arrglelo, en su casa o en la nuestra! En su casa Para reparaciones -en su domicilio- de electrodomésticos de marcas conocidas y equipamiento de jardín, o sistemas de calefacción o refrigeración, no importa quien lo haya fabricado o quien se lo haya vendido. Para componentes de repuesto, accesorios y...