Craftsman 315.271350- Manuals

Page 2 - STORE IN THE UNITED STATES.; INTRODUCTION

TABLE OF CONTENTS Warranty........................................................................................................................................................... 2 Introduction and Product Specifications................................................................................

Page 3 - RULES FOR SAFE OPERATION; SYMBOL MEANING

RULES FOR SAFE OPERATION The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings t...

Page 5 - IMPORTANT INFORMATION FOR RECHARGING HOT BATTERIES; Do not

RULES FOR SAFE OPERATION (Continued) An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure: That pins on plug of extension cord are the same number, size and shape ...

Page 6 - ACCESSORIES; FEATURES; WRIST STRAP

ACCESSORIES The following recommended accessories are currently available at Sears Retail Stores. ■ 6-Pc. Extra Length Magnite Power Bit Set ■ High Speed Bits (For Wood or Metal)..3/4 in. Max. ■ 30-Pc, Power Screwdriver/Nutdriver Set and Case ■ Keyless Chuck (Item No. 9-20988) ■ 17-Pc, Power Screwdr...

Page 7 - OPERATION; CHARGING YOUR DRILL-DRIVER; ■ Make sure power supply is normal household

OPERATION WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. iV WARNING: Do not allow familiarity with your drill-driver to make you careless. Rememb...

Page 8 - SWITCH

OPERATION SWITCH See Figure 2. To turn your drill ON, depress the switch trigger. To turn it OFF, release the switch trigger. SELECTOR Fig. 2 VARIABLE SPEED This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount ...

Page 9 - SWITCH LOCK; OFF; REVERSIBLE; LOCK; UNLOCK

OPERATION SWITCH LOCK See Figure 5. The switch trigger can be locked in the OFF position. This feature can be used to prevent the possibility of accidental starting when not in use. To lock switch trigger, place the direction of rotation selector in center position. A WARNING: Battery toots are alwa...

Page 10 - INSTALLING BITS; RIGHT; REMOVING BITS; ADJUSTABLE TORQUE CLUTCH; Ail

OPERATION INSTALLING BITS See Figure 8. ■ Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 2. ■ Open or close chuck jaws to a point where the opening is slightly larger than the bit size you intend to use. Also, raise the front of your drill slight...

Page 11 - LO; BIT STORAGE

OPERATION Note: Remember the two-speed feature (HI-LO) when setting torque. The amount of torque will vary depend ing on which speed setting you have your drill-driver. Switching to LO speed will increase torque. Switching to HI speed will decrease torque, BIT STORAGE See Figure 11. When not in use...

Page 12 - CHUCK REMOVAL

OPERATION CHUCK REMOVAL See Figures 14, 15, and 16. The chuck must be removed in order to use some accessories. To remove: ■ Lock the switch trigger by placing the direction of rotation selector in center position. ■ Insert a 5/16 inch or larger hex key wrench into the chuck of your drill and tighte...

Page 13 - MAINTENANCE; BATTERIES; OVERLOAD

MAINTENANCE A WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be dam...

Page 15 - SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS; PARTS LIST; Key

CRAFTSMAN PROFESSIONAL 3/8 in. CORDLESS DRILL-DRIVER MODEL N0.315.271350 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your 3/8 in. CORDLESS DRILL-DRIVER or when ordering repair parts. SEE BACK PAGE FOR PARTS ...

Page 16 - For the repair or replacement parts you need:; Parts Direct; For the location of a Sears Service Center in your area:; Call 24 hours a day, 7 days a week; To purchase or inquire about a Sears Maintenance Agreement:

In U.S.A. or Canada for in-home major brand repair service: Call 24 hours a day, 7 days a week 1 -800-4-MY-H O IVI E ( 1 -800-469-4663) Para pedir servicio de reparaclón a domicilio -1-800-676-5811 Au Canada pour tout le service ou les pièces - 1-800-469 4663 For the repair or replacement parts you ...