Craftsman 172.10723- Manuals

Page 2 - TABLE OF CONTENTS; SAVE THESE INSTRUCTIONS!; ONE YEAR FULL WARRANTY ON CRAFTSMAN; within one year from the date of purchase,; RETURN IT TO THE NEAREST; SAFETY SYMBOLS; SYMBOL MEANING; WARNING; The safety symbols, and the explanations with them, deserve your; careful; for proper accident prevention measures.; Some dust created by using power tools contains

2 TABLE OF CONTENTS SAVE THESE INSTRUCTIONS! READ ALL INSTRUCTIONS! Warranty.........................................................................Page 2 Safety Symbols...............…………......................... ........Page 3Safety Instructions...............…………............................Pages...

Page 3 - SAFETY INSTRUCTIONS; WORK AREA SAFETY; SAFETY INSTRUCTIONS cont.; ELECTRICAL SAFETY

SAFETY INSTRUCTIONS 4 WARNING: BE SURE to read and understand all instructions in this manual before using this power tool. Failure to follow all instructions may result in electric shock, fire and / or serious personal injury. ! WORK AREA SAFETY 1. Keep your work area clean and well lit. Cluttered ...

Page 4 - ELECTRICAL SAFETY cont.; SERVICE SAFETY; missing, damaged or failed parts replaced; SAFETY RULES FOR BUFFER / POLISHERS; and all directions and warnings on polishes and waxes; SAFETY SYMBOLS FOR YOUR TOOL; It means attention! Your safety is involved.; The label on your tool may include the following symbols.

SAFETY INSTRUCTIONS cont. 6 7 WARNING: Check extension cords before each use. If damaged replace immediately. Never use tool with a damaged cord since touching the damaged area could cause electrical shock, resulting in serious injury. ! 4. AVOID body contact with grounded surfaces , such as pipes, ...

Page 5 - SAFETY RULES FOR BUFFER / POLISHERS cont.; ALWAYS start and stop the buffer / polisher on or against; ADDITIONAL RULES FOR SAFE OPERATION; • Work with approved safety equipment, such as those dust

SAFETY INSTRUCTIONS cont. SAFETY INSTRUCTIONS cont. SAFETY RULES FOR BUFFER / POLISHERS cont. 6. To avoid splashing wax, ALWAYS start and stop the buffer / polisher on or against the surface to be polished. 7. After plugging in extension cord, loop extension cord over tool’s stub length plug. Then w...

Page 6 - KNOW YOUR BUFFER / POLISHER; DESCRIPTION

10 11 Your Craftsman buffer / polisher has a precision-built electric motor and it should be connected to a 120-volt, 60-Hz AC ONLY power supply (normal household current). DO NOT operate on direct current (DC). The large voltage drop will cause a loss of power and the motor will overheat. If the to...

Page 7 - When changing; Place wax applicator bonnet on foam pad; OPERATION; PRODUCT SPECIFICATIONS

12 13 OPERATION cont. Fig. 3 BEFORE YOU BEGIN TO WAX, BUFF AND POLISH YOUR CAR: 1. Remove all road tar, excess grease spots and bug stains with a general-purpose cleaner. 2. Wash, clean and dry your vehicle. Your buffer polisher comes in a 5-gallon bucket, which can be used for washing the vehicle. ...

Page 8 - BE SURE that the switch is; in the; OFF position and the cord is

14 15 OPERATION cont. RUNNING YOUR BUFFER / POLISHER AND WAXING VEHICLE cont. 12. You can use the hand applicator pad included with the buffer / polisher to hand wax all the hard-to-reach surfaces (under bumpers, around door handles, etc.), or remove the wax applicator bonnet and use it to hand poli...

Page 9 - ACCESSORIES; The use of attachments or accessories that are not; the finish or strip the wax.; MAINTENANCE; bonnet to become saturated and it will not last as long.

16 ACCESSORIES Sears and other Craftsman ® outlets offer a large selection of Craftsman buffer / polisher accessories designed for all your buffing and polishing applications. Look for these Craftsman accessories. They are specially designed to make your 10-in. Buffer / Polisher more efficient to us...