Craftsman 137.212370- Manuals

ELECTRICAL REQUIREMENTS - cofit’d DOUBLE INSULATED B The power tool is double insulated to provide a double thickness of insulation between you and tool’s electrical system. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Replacement parts - ...

ACCESSORIES AND ATTAGH!\/IENTS FORASSE RECOMMENDED ACCESSORIES A WARNING • Use only accessories recommended for this miter saw. Follow instructions that accompany accessories. Use of improper accessories may cause hazards. m The use of any cutting tool except 10 inch saw blades which meet the requir...

CARTON CONTENTS UNPACKING YOUR MITER SAW IA WARNING To avoid injury from unexpected starting or electrical shock, do not plug the power cord Into a source of power during unpacking and assembly. The cord must remain unplugged whenever you are adjusting/assembllng the saw. 1 - Remove the miter saw fr...

GLX)SSARY OF TERMS ARBOR LOCK “Allows the user to keep the blade from rotating while tightening or loosening the arbor lockingbolt during blade replacement or removal. BASE - Supports the table, holds accessories and allows tor workbench or leg set mounting, BEVEL LOCKING HANDLE - Locks the miter sa...

ASSEMBLY Estimated Assembly Time: 5 -10 minutes A WARNING To avoid injury, do not connect this miter saw to the power source until it is completely assembled and adjusted and you have read and understood this Operator’s Manual. INSTALLING THE MITER HANDLE (FIG. A) 1. Thread the miter handle (1) into...

ADJUSTMEm“ BEVEL STOP ADJUSTMENT IA WARNING To avoid injuty from an accidental start, make surethe switch is in the OFF position and the plug is not connected to the power source outlet. 90° (0°) Bevel adjustment (Fig. L) 1. Loosen bevel lock handle (1) and tilt the cutting arm completely to the rig...

OPERATION SAFETY INSTRUCTIONS FOR BASIC SAW OPERATIONS BEFORE USING THE MITER SAW A WARNING To avoid mistakes that could cause serious, permanent injury, do not plug the tool in until the following steps are completed: • Completely assemble and adjust the saw, following the instructions. (SEE ASSEMB...

PLAN YOUR WORK Use the right tool. Do not force a tool or attachment to do a job it was not designed to do. Use a different fool for any workpiece that cannot be held in a solidly braced, fixed position. A WARNING This machine is NOT designed for cutting masonry, masonry products or ferrous metals (...

NOTE; The saw comes with a 33.9° crown molding stop. 33.9” BEVEL STOP FOR CROWN MOLDING (FIG. W) 1. Push the bevel detent stop pin (2) in toward the front of the machine. 2, Loosen the bevel lock handle (1),3. Rotate the cutting head until the bevel detent pin stops the bevel angle at 33.9° on the b...

CROWN MOLDING CHART Compound Miter Saw Miter and Bevel Angle Settings Wall to Crown Molding Angle 52738° Crown Molding 45/45° Crown Molding Angle Beti^een Wails Miter Setting Bevel Setting Miter Setting Bevel Setting 67 42.93 41.08 46 89 36 13 83 42.39 40 79 46 35 36 83 S9 41 85 • 40.50 45 81 35' 64...

MAINTENANCE MAINTENANCE A WARNING A DANGER Never put lubricants on the blade while it is spinning. IA WARNING * To avoid fire or toxic reaction, never use gasoline, naphtha acetone, iacquer thinner or similar highly volatile solvents to clean the miter saw. * To avoid injury from unexpected starting...

TR0UBLESHCX3T1NG GUIDE A WARNING To avoid injury from accidental starting, always turn switch OFF and unplug the tool before moving, replacing the blade or making adjustments. TROUBLESHOOTING GUIDE - MOTOR PROBLEM PROBLEM CAUSE SUGGESTED CORRECTIVE ACTION Brake does not stop blade within 6 seconds. ...

10 IN. SLIDING COMPOUND MiTER SAW MODEL NO. 137.212370 A WARNING When servicing use only CRAFTSMAN replacement parts. Use of any other parts many create a HAZARD or cause product damage. Any attempt to repair or replace electrical parts on this Miter Saw may create a HAZARD unless repair is done by ...

10 IN. SLIDING COMPOUND MITER SAW SCHEiWATlG FOR SAW MODEL NO. 137.212370 ïgJBN 2DXB

Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner’s manuals that you need to do-it-yourself. For Sears professional installatio...