Costway BXD4-A023 - Manuals

Page 2 - ICE MAKER; INSTRUCTION

1 ICE MAKER INSTRUCTION MANUAL Model: (3 Read this manual thoroughly before using and save it for future reference

Page 3 - IMPORTANT SAFETY INSTRUCTIONS

2 IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, explosion, electric shock, or injury when using your ice maker,follow these important safety instructions:1. Before using check that the voltage power corresponds to the one shown on theappliance nameplate.2. Do not remove any safety, warni...

Page 5 - KNOW YOUR ICE MAKER; (Product may be subject to change without prior notice); CONTROL PANEL

4 SAVE THESE INSTRUCTIONS HOUSEHOLD USE ONLY KNOW YOUR ICE MAKER Ice basket Ice spoon Control panel Infrared light-emitting diode Filter Drain plug "MAX" water level Infrared light-receiving diode (Product may be subject to change without prior notice) CONTROL PANEL

Page 6 - Function; BEFORE FIRST USE

5 Key (with indicator) Function ON/OFF Start or stop the appliance POWER Standby mode: “POWER” indicator blinks;Working condition: “POWER” indicatorlights solidly. ICE FULL “ICE FULL” indicator lights up when theice basket is full. ADD WATER “ADD WATER” indicator lights up whenthe water reservoir is...

Page 7 - “CLEANING AND; USING YOUR ICE MAKER; NOTE

6 from heat sources such as ovens, heaters and corrosive gases. Leave about a 6-inchclearance on all sides of the ice maker for proper ventilation.5. Do not fill the water reservoir with hot water. This may damage the ice maker. It isbest to fill the water reservoir with water of room temperature or...

Page 8 - CLEANING AND MAINTENANCE

7 function automatically.10. The “ADD WATER” indicator will light up when the water reservoir is lack of waterand the ice-making cycle will stop automatically. At that time, remove the ice basket andadd water to the water reservoir, and then press “ON/OFF” key again to restart theice-making cycle.11...

Page 9 - Working table; TROUBLESHOOTING; Problem

8 2) Do not clean the evaporator.8. Please empty the water reservoir and dry it for storage if the ice maker is not used for along time. 60 Working table （ Fig.3 ）（ Fig.4 ）（ Fig.5 ） TROUBLESHOOTING Problem Possible causes Solution “ADD WATER”indicator turns on 1.Low water level or lack ofwater2.Th...

Page 11 - TECHNICAL PARAMETERS

10 Refrigerating system leaks Call customer service Refrigerating system blocks Call customer service Poor ice-making result 1.Poor heat dissipation. 1. Leave a 6-inch clearance 2.The water temperature is too on all sides of the ice maker high. for proper ventilation. 3.The ambient temperature is to...