Costway BXD1967 - Manuals

8 temperature; And if the number flashes, it will display the left time in minute of each process, likeeach ice-making cycle, self-cleaning program, etc.H ．“ ON/OFF ” button ： When the unit is off, press this button to turn on the unit; And during the Self-cleaning program, or normal ice-making stat...

10 40 Water drainage cap Rubber 1 41 Water drainage port ABS 1 42 Door for ice taking ABS 2 43 Water inlet port PP 1 44 Power cord Electrical parts 1 45 Clipper of the power cord PP, fire-retardant 1 46 Wiring Electrical parts 1 UNPACKING YOUR ICE MAKER 1. Remove the exterior and interior packaging....

11 Electrical Shock Hazard Plug into a grounding wall outlet. Never remove the ground prong. Use separate power supply or receptacle. Never use an adapter. Never use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. To ensure proper ventilation f...

12 CLEANING CLEANING YOUR YOUR ICE ICE MAKER MAKER BEFROE BEFROE FIRST FIRST USING USING Before using your ice maker, it is strongly recommended to clean it thoroughly. 1. Open the ice getting door. 2. Clean with diluted detergent, warm water and a soft cloth. 3. Repeatedly clean the water contactin...

13 3. Connect the water hose to the water faucet of the water main supply system First, install the supplied water quick-connector to the water faucet by screw thread; Second, remove the clipper from the water quick-connector, insert the another end of the water hose into this quick-connector port c...

14 will start to make the ice cube again. But it will restart only after 3 minutes interval of compressor running. 5. During the ice-making process, press the “+” or “-” button to adjust the ice-making process duration period length, then to change the thickness of the ice cube. Press the “+” or “-”...

15 Normal Sounds Your new ice maker may make sounds that are not familiar to you. Most of the new sounds are normal. Hard surfaces like the floor, walls and cabinets can make the sounds seem louder than they actually are. The following describes the kinds of sounds that might be new to you and what ...

16 Preparing the Ice Maker for Long Storage If the ice maker will not be used for a long time, or is to be moved to another place, it will be necessary to drain out all of the water in the system. 1. Allow all of the ice cubes have been ejected from the evaporator of ice maker. 2. Turn off the unit,...

17 Exterior Cleaning The door and cabinet may be cleaned with a mild detergent and warm water solution such as 28g ofdish washing liquid mixed with 7.5L of warm water. Do not use solvent-based or abrasive cleaners. Usea soft sponge and rinse with clean water. Wipe with a soft clean towel to prevent ...

20 The ice machine cleaner contains acids.DO NOT use or mix with any other solvent-based cleanerproducts.Use rubber gloves to protect hands. Carefully read the materialsafety instructions on the container of the ice machine cleaner. the water tank, drain the cleaning solution down to the lower ice s...

21 Problem Possible Cause Solution “ADD WATER” indicator is on. No water supply Check the main water supply pressure or check the water supply hose is blocked or not, adding the water pressure or cleaning the hose necessary. Floating ball of the water level detecting switch is blocked, can’t be rais...

22 ERROR INDICATOR a) Ambient temp sensor breakdown----- Display E1 in digital window. b) Suction tube temp sensor----Display E2 in digital window c) Both Ambient temp sensor and Suction tube temp sensor breakdown----- Display E3 in digital window. d) -Magnetic control switch cutoff----”Full” light ...