Compaq uSign 200 - Manuals - manualsarea.com

Page 2 - uSign User Manual

uSign User Manual FCC WARNING STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a comme...

Page 4 - Table of Contents

uSign User Manual Table of Contents 1.0 Introduction .................................................................................................6 2.0 Features .....................................................................................................6 3.0 Model Designations ............

Page 5 - Table of Figures

uSign User Manual 7.4.6 Get data 0x00 0x01 .......................................................................15 7.4.7 Calibrate the device .......................................................................15 7.4.8 Set offset position ...........................................................

Page 8 - Interfaces; USB; } for the system to communicate with the uSign.

uSign User Manual 5.1 Communication Interfaces RS232 The uSign has a communication cable with a DB25 (100 Model) or DB-9 (200 Model) connector that fits the computer serial (RS232) COM port connection. See the Specifications, Interface Section for COM port settings. Connect the RS232 connector to th...

Page 9 - Figure 1 New Hardware Wizard opening window; uSignUsbCD; Figure 2 Browse for File

uSign User Manual Figure 1 New Hardware Wizard opening window Browse and select the folder where the uSignUsbCD C.inf and companion usbser.sys files are located. Click Next > to continue. Figure 2 Browse for File Copyright © 2006, International Technologies & Systems Corp. All rights reserved...

Page 10 - Figure 3 Installation Warning Message; requirement

uSign User Manual There is a warning window that the INF file is not registered; Click “Continue Anyway”. Click Finish to complete the INF installation. Figure 3 Installation Warning Message 5.2 USB-CDC Setup The following steps provide a check on the USB-CDC COM port selected by the operating syste...

Page 11 - Physical housing uSign 200

uSign User Manual 6.3 Physical housing uSign 200 Overall size 129mm wide (5.1 in) 146mm length (5.75 in) 40mm thick including back plate (1.57 in) Display 3.3-inch diagonal signature area 6.4 LCD screen & Resistive touch pad Touchpad Resistive, transparent, pressure-sensitive screen Display STN ...

Page 13 - Host to device: STX LenL LenH CommandData Lrc1 Lrc2 ETX; Commands

uSign User Manual 7.0 uSign commands description (Version: 0.02 Date: 2007-03-19) Note: digits are given in little-endian format. 7.1 Command protocol: Host to device: STX LenL LenH CommandData Lrc1 Lrc2 ETX STX: 0x02. 1 byte. LenL+LenH: sizeof(CommandData). 2 bytes. CommandData: main command string...

Page 14 - One byte commands

uSign User Manual 7.3 One byte commands 7.3.1 Stop Capturing Command string: C0 Response string: C0 7.3.2 Start Capturing use FBP format 1 Command string: C1 Response string: C1 7.3.3 Start Capturing use FBP format 2 Command string: C2 Response string: C2 7.3.4 Turn red led on Command string: C3 Res...

Page 15 - commands

uSign User Manual 7.3.12 Start Capturing use FBP format 0 Command string: D6 Response string: D6 7.4 Multi-byte commands 7.4.1 Initialize device Command string: 28 10 00 00 Response string: DC 05 7.4.2 Get PW120 Version Command string: 2A 10 00 00 Response string: 01 00 7.4.3 Test device Command str...

Page 17 - uSignTM 100 SIGNATURE CAPTURE PAD

Page 18 - uSignTM 200 SIGNATURE CAPTURE PAD