Compaq EP7150 - Manuals - manualsarea.com

Page 2 - Usage Notice; Precautions; Follow all warnings, precautions and maintenance as recom-

2 English Usage Notice Precautions Follow all warnings, precautions and maintenance as recom- mended in this user’s guide to maximize the life of your unit. Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. Warning- To reduce the risk of ﬁ re or...

Page 4 - Introduction; Product Features; Congratulations and Thank You for choosing an EP7150 pro-; projector. Outstanding features include:

4 English Introduction Product Features Congratulations and Thank You for choosing an EP7150 pro- jector, an Optoma Product. This product is a XGA single chip 0.55” DLP TM projector. Outstanding features include:  True XGA, 1024 x 768 addressable pixels  Texas Instruments Single chip DLP TM Techno...

Page 5 - Package Overview; This projector comes with all the items shown below. Check to

5 English Introduction Power Cord 1.8m VGA Cable 1.8m Wireless Remote Controller Composite Video Cable 1.8m Projector with lens cap Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immedi- ately if anything is missing...

Page 6 - Main Unit; Product Overview

6 English Introduction 1. Control Panel 2. Zoom Lever 3. Power Socket 4. Speaker 5. Elevator Button 6. Zoom Lens 7. Focus Ring 8. IR Receivers 9. Connection Ports Main Unit Product Overview 1 2 5 6 1 9 8 3 7 2 4

Page 7 - Control Panel

7 English Introduction Control Panel 1. Enter 2. Menu (On/Off) 3. Power 4. Four Directional Select Keys 1 2 3 8 9 7 6 5 4 Connection Ports 1. VGA-In SCART Connector (PC Analog signal/SCART RGB/HDTV/Component Video Input) 2. Composite Video Input Connector 3. S-Video Input Connector 4. Audio Input Co...

Page 8 - Remote Control with Laser Pointer

8 English Introduction Remote Control with Laser Pointer 1. Laser Button 2. Four Directional Select Keys 3. Keystone +/- 4. Page Up 5. Page Down 6. Source Select 7. Freeze 8. Power 9. Menu 10. Enter 11. Mute 12. Resync 13. Hide 8 10 11 4 5 1 12 13 6 7 9 2 3

Page 9 - Installation; Connecting the Projector

9 English Installation Connecting the Projector  Due to the differ- ence in applications for each country, some regions may have different acces- sories. S-Video Output Video Output DVD Player, Settop Box, HDTV receiver RGB 1. ...........................................................................

Page 10 - Powering On the Projector; fl ash green; Powering On/Off the Projector

10 English Installation Powering On the Projector 1. Remove the lens cap.  2. Ensure that the power cord and signal cable are securely connected. The Power LED will ﬂ ash green . 3. Turn on the lamp by pressing “Power” button on the control panel.  And the Power LED will turn green . 4. Turn on yo...

Page 11 - Warning Indicator; turn green

11 English Installation Warning Indicator  When the “LAMP” indicator lights solid red, the projector will automatically shut itself down. Please contact your local reseller or service center. See page 34.  When the “TEMP” indicator lights solid red for about 60 seconds, it indicates the projector ...

Page 12 - Adjusting the Projected Image; Adjusting the Projector Image Height; The projector is equipped with elevator foot for adjusting the

12 English Installation Adjusting the Projected Image Adjusting the Projector Image Height Tilt Adjusting Foot Elevator Foot Elevator Button The projector is equipped with elevator foot for adjusting the image height. To raise the image: 1. Press the elevator button  . 2. Raise the image to the des...

Page 13 - Adjusting the Projector Zoom / Focus; Adjusting Projection Image Size

13 English Installation 69.3" (176.1cm) 115.6" (293.5cm) 161.8" (410.9cm) 208.0" (528.3cm) 277.3" (704.4cm) 38.1" (96.8cm) 76.2" (193.6cm) 127.1" (322.7cm) 177.9" (451.8cm) 228.7" (580.9cm) 304.9" (774.5cm) 4.9'(1.5m) 39.4'(12.0m) 29.5'(9.0m) 23.0'(7.0m) 1...

Page 14 - User Controls; Using the Control Panel; Control Panel & Remote Control; There are two ways for you to control the functions: Remote

14 English User Controls Using the Control Panel Power Refer to the “Power On/Off the Projector” section on pages 10-11. Source 1 Press “Source” to select an input signal. Menu Turns the menu On or Off. Four Direc- tional Select Keys Use to navigate through the menus. Enter Conﬁ rm your item selecti...

Page 15 - Using the Remote Control

15 English User Controls Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 10-11. Resync Automatically synchronizes the projector to the input source. Laser Button Aim the remote at the viewing screen, press and hold this button to activate the laser pointer. ...

Page 16 - The Projector has multilingual On Screen Display menus that; How to Operate; On Screen Display Menus

16 English User Controls The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to Operate 1. To open the OSD menu, press “Menu” on the Remote Control or Control Panel. ...

Page 17 - Menu Tree

Page 18 - Language

18 English User Controls Language Language Choose the multilingual OSD menu. Use the or key to select your preferred language. Press “Enter” to ﬁ nalize the selection.

Page 19 - Display Mode

19 English User Controls Display Mode There are many factory presets optimized for various types of im-ages.  PC: For computer or notebook. (brightest image)  Movie: For home theater.  sRGB: For standard PC color. (best color reproduction)  Bright: For bright mode.  User: Memorize user’s settin...

Page 21 - Frequency

21 English User Controls Frequency “Frequency” changes the display data frequency to match the fre- quency of your computer’s graphic card. If you experience a vertical ﬂ ickering bar, use this function to make an adjustment. Tracking “Tracking” synchronizes the signal timing of the display with the...

Page 22 - 6:9 Image Position

22 English User Controls 16:9 Image Position Adjust the image position up or down, when you select the aspect ratio of 16:9.  Press the to move the image down.  Press the to move the image up. Input Signal Display area Picture area Display on Screen  “16:9 Image Posi- tion” function is supported ...

Page 23 - Degamma

23 English User Controls Degamma This allows you to choose a degamma table that has been ﬁ ne-tuned to bring out the best image quality for the input. Saturation Adjusts a video image from black and white to fully saturated color.  Press the to decrease the amount of saturation in the image.  Pres...

Page 25 - Volume; Mute; Audio

25 English User Controls Volume  Press to decrease the volume.  Press to increase the volume. Mute  Choose the left icon to turn mute on.  Choose the right icon to turn mute off. Audio

Page 26 - Menu Location; Management

26 English User Controls Menu Location Choose the menu location on the display screen. Projection  Front-Desktop The factory default setting.  Rear-Desktop When you select this function, the projector reverses the image so you can project from behind a translucent screen. Signal Type Select signal...

Page 27 - Lamp Setting; Lamp Hours

27 English User Controls Lamp Setting Lamp Hours Displays the cumulative lamp operating time. Lamp Reset Resets the lamp life hour counter after replacing the lamp. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will...

Page 28 - Appendices; Problem: No image appears on screen; Troubleshooting; If you experience trouble with the projector, refer to the follow-

28 English Appendices Problem: No image appears on screen  Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section.  Ensure the pins of connectors are not crooked or broken.  Check if the projection lamp has been securely install...

Page 29 - Problem: The screen of the Notebook or PowerBook computer

29 English Appendices 5. Select the “Change” button under the “Monitor” tab.6. Click on “Show all devices.” Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box.  If you are using a Notebook: 1. First, follow the steps above to adjust re...

Page 30 - Problem: The image is stretched when displaying 16:9 DVD

30 English Appendices  Make sure the projection screen is between distance 4.9 to 39.4 feet (1.5 to 12.0 meters) from the projector. See page 13. Problem: The image is stretched when displaying 16:9 DVD The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full ...

Page 31 - Problem: Message Reminders

31 English Appendices Problem: Message Reminders  Fan fail:  Over temperature:  Power Off:  Replace the lamp:

Page 32 - Replacing the Lamp; Lamp Replacement Procedure:

32 English Appendices Replacing the Lamp The projector keeps track of the lamp usage. It will show you a warning message When you see this message, change the lamp as soon as pos- sible. Make sure the projector has cooled down for at least 30 minutes before changing the lamp. Warning: Lamp compartme...

Page 33 - Compatibility Modes

33 English Appendices Remark : “ * ”com- pressed computer image. Compatibility Modes Mode Resolution (ANALOG) V.Frequency (Hz) H.Frequency (kHz) VESA VGA 640 x 350 70 31.5 VESA VGA 640 x 350 85 37.9 VESA VGA 640 x 400 85 37.9 VESA VGA 640 x 480 60 31.5 VESA VGA 640 x 480 72 37.9 VESA VGA 640 x 480 7...

Page 34 - Optoma Global Offi ces; For service or support please contact your local offi ce.

34 English Appendices Optoma Global Ofﬁ ces For service or support please contact your local ofﬁ ce. USA 715 Sycamore Drive Tel : 408-383-3700 Milpitas, CA 95035, USA Fax: 408-383-3702 www.optomausa.com Service : [email protected] [email protected] Canada 5630 Kennedy Road, Mississauga, ON, L4Z 2A...

Page 35 - Regulation & safety notices; FCC notice

35 English Appendices Regulation & safety notices This appendix lists the general notices of your Projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonab...