Compaq 3134 - Manuals

About This Guide This user guide can be used for reference when installing the Compaq NC3134 Fast Ethernet Server Adapter or one of its upgrade modules. WARNING: To reduce the risk of personal injury from electrical shock and hazardous energy levels, only authorized service technicians should attemp...

vi Compaq NC3134 Fast Ethernet Server Adapter User Guide Compaq Technician Notes WARNING: Only authorized technicians trained by Compaq should attempt to repair this equipment. All troubleshooting and repair procedures are detailed to allow only subassembly/module level repair. Because of the comple...

About This Guide vii Compaq Customer Support You can reach Compaq automated support services 24 hours a day, every day at no charge. The services provide the most up-to-date information about Compaq products. You can access installation instructions, troubleshooting information, and general product ...

viii Compaq NC3134 Fast Ethernet Server Adapter User Guide Calling the Compaq Support Line When you call the Compaq Support line, you must be at your server with your software running and the product documentation at hand. The Compaq technician may ask for the following information: Your address and...

Chapter 1 Introduction Overview The Compaq NC3134 Fast Ethernet Server Adapter is a second-generation, dual-port adapter that offers improved performance over earlier versions of the product. This improvement is due to the 64-bit/66MHz PCI-to-PCI bridge, as well as to the enhanced MAC silicon techno...

Introduction 1-3 Upgrade Modules The NC3134 adapter supports the following upgrade modules: NOTE: See the section titled “LED Indicator Descriptions” for descriptions of LED indicator functions. NC3135 Upgrade Module The NC3135 upgrade module has two RJ-45 dual-speed ports and associated LEDs indica...

1-4 Compaq NC3134 Fast Ethernet Server Adapter User Guide NC3133, NC6132, and NC6133 Fiber Upgrade Modules The NC3133, NC6132, and NC6133 fiber upgrade modules each have one SC fiber port and LEDs indicating link and activity. Figure 1-4. NC3133, NC6132, and NC6133 fiber SC port and LED indicators L...

Introduction 1-5 NC7132 LED Indicators The Compaq NC7132 upgrade module has four diagnostic LED indicators (see Figure 1-3). LED colors change with different link and activity (transmission/reception) speeds. Table 1-3 NC7132 Gigabit Upgrade Module LED Indicators LED Display Description Amber Link i...

Chapter 2 Installing the Upgrade Module and Adapter This chapter describes installation precautions, how to attach upgrade modules to the adapter, and how to install the adapter. It also describes how to attach the network cable and the loopback plugs. WARNING: To avoid the risk of personal injury o...

2-2 Compaq NC3134 Fast Ethernet Server Adapter User Guide Attaching the Upgrade Module The Compaq NC3134 Fast Ethernet Server Adapter design lets you attach an upgrade module. This increases the number of RJ-45 ports to four, in addition to adding one 100 Mb/s FX fiber port, one 1000 Mb/s fiber port...

2-4 Compaq NC3134 Fast Ethernet Server Adapter User Guide Installing the Adapter in a Server Refer to the Compaq ProLiant™ documentation for the specific steps necessary to safely install a PCI card in your server. Figure 2-2. Installing the adapter in a server 1. If you have not already done so, an...

Installing the Upgrade Module and Adapter 2-5 Connecting the Network Cable Network connections for the adapter and upgrade modules use UTP or fiber cable. See the sections “UTP Cable Specifications” and “Fiber Cable Specifications” in Appendix C for a description of each upgrade module and the cable...

2-6 Compaq NC3134 Fast Ethernet Server Adapter User Guide Connecting and Using Loop-Back Plugs RJ-45 loop-back plugs are supplied in the adapter and upgrade module packages. A fiber loop- back plug is available in a spare parts kit. Install these plugs in any unused RJ-45 or fiber port on the adapte...

Appendix A Regulatory Compliance Notices IMPORTANT: All of the following Regulatory Compliance Notices apply to the TX-based adapters and upgrade modules. For fiber adapters and fiber upgrade modules, only the European Union Notice applies. Federal Communications Commission Notice Part 15 of the Fed...

A-2 Compaq NC3134 Fast Ethernet Server Adapter User Guide Class B Equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference i...

Regulatory Compliance Notices A-3 Canadian Notice (Avis Canadien) Class A Equipment This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel broui...

A-4 Compaq NC3134 Fast Ethernet Server Adapter User Guide Japanese Notice

Appendix B Electrostatic Discharge To prevent damage to the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of...

Appendix C Specifications NC3134 Fast Ethernet Server Adapter Specifications Table C-1 NC3134 Fast Ethernet Server Adapter Specifications Specification Description Network Controller Chipset Intel 82559 MAC/PHY Data Transfer Method 64-bit/66MHz PCI, compatible with 64-bit/33MHz or 32-bit/33MHz Bus M...

C-2 Compaq NC3134 Fast Ethernet Server Adapter User Guide Upgrade Module Specifications Environmental and safety specifications for the upgrade modules are the same as those for the NC3134 Server Adapter, as shown in Table C-1. All other specifications are the same except where noted. NC3132 10/100 ...

C-4 Compaq NC3134 Fast Ethernet Server Adapter User Guide NC7132 1000BASE-T (Gigabit over Copper) Upgrade Module Table C-7 NC7132 Gigabit over Copper Upgrade Module Specification Description Network Controller Chipset Intel 82543GC MAC Standards Supported IEEE 802.3ab, 802.1p, 802.3z, 802.3u Connect...

Specifications C-5 RJ-45 Pinouts and Crossover Function 10BASE-T, 100BASE-TX, and 1000BASE-T are keyed systems to differentiate between voice and data transmissions, in order to keep them separate over twisted-pair cable. The Ethernet standard also specifies that each cable segment implement a cross...

C-6 Compaq NC3134 Fast Ethernet Server Adapter User Guide 10/100 Crossover Pinouts When the crossover function is not provided within the hub or switch, you must implement the crossover through the twisted-pair media using the physical pinouts indicated in Table C-10. Table C-10 10/100 Pinouts Using...

Specifications C-7 Table C-11 Gigabit over Copper Pinouts Using Internal Crossover Pin Function Color Match Function Pin 1 BI_DA+ White/Orange BI_DA+ 1 2 BI_DA- Orange/White BI_DA- 2 3 BI_DB+ White/Green BI_DB+ 3 4 BI_DC+ Blue/White BI_DC+ 4 5 BI_DC- White/Blue BI_DC- 5 6 BI_DB- Green/White BI_DB- 6...

C-8 Compaq NC3134 Fast Ethernet Server Adapter User Guide Gigabit over Copper External Crossover Pinouts When a crossover function is not provided by either the adapter or hub or switch, you must implement it through the twisted-pair media using the physical pinouts shown in Table C-12. Table C-12 G...

Specifications C-9 Fiber Cable Specifications To connect to the network, the NC3133, NC6132, and NC6133 upgrade modules use 100 BASE-FX, 1000 BASE-SX, or 1000BASE-LX fiber cable, respectively. Table C-13 and Table C-14 describe the fiber types, mode, cable size, and maximum distance specifications f...