Cobra XRS 9960G - Manuals

Windshield Mounting Dashboard Mounting Installation Your Detector Nothing Comes Close to a Cobra ® 3 Overview Introduction 2 English Installation • Where to Mount Your Unit You will get optimum performance from your detector if you mount it at apoint approximately in the center of the vehicle, as lo...

Installation Your Detector Nothing Comes Close to a Cobra ® 5 Installation Your Detector 4 English 1. Attach the rubber cups to the bracket. 2. Make sure the rubber cups and your windshield are clean. 3. Push the bracket firmlyonto the windshield. 4. Attach the detector to the bracket. Check that th...

7 6 English Getting Started Nothing Comes Close to a Cobra ® To Turn On the Unit and Adjust the Audio Volume Rotate the On-Off / Volume control clockwise (away from you). Unit will cycle through Power On / Self Test. Alert Settings will scroll. Check marks indicate which are set. (Factory defaults a...

Nothing Comes Close to a Cobra ® 9 8 English Getting Started Getting Started Standby Screens • Press Mute 6 while the down arrowhead is displayed at the top center of any Standby screen to cycle through and select a different screen. The Standby screens will be displayed in the following order: NOTE...

Getting Started Nothing Comes Close to a Cobra ® 11 Getting Started Display Control • Illumination The display illumination intensity can be adjusted to suit driving conditions: ■ Bright for daytime driving. (Factory default is Bright, then Display Timeout after 30 seconds.) ■ Dim for dusk driving. ...

EasySet Menu Your Detector Nothing Comes Close to a Cobra ® 13 EasySet Menu Your Detector 12 English EasySet Menu gives you quick and easy access to all the settings on your detector. It is used to select both: ■ User Settings (see page 16) ■ Alert Settings (see page 23) Refer also to the Menu Flow ...

Menu Flow Diagrams Your Detector Nothing Comes Close to a Cobra ® 15 Menu Flow Diagrams Your Detector 14 English User Settings Menu • User Menu allows you to adjust the unit’s display and sounds to yourpreferences. The User Settings can be selected using the Dim 3 and City 4 buttons by scrolling thr...

Settings Your Detector Nothing Comes Close to a Cobra ® 17 Settings Your Detector 16 English User Settings • IntelliShield City Mode Default City Mode Default makes three levels of Audio Alert suppression available when you toggle from Highway to City mode. The factory setting is City X. City X soun...

Settings Your Detector Nothing Comes Close to a Cobra ® 19 Settings Your Detector 18 English NOTE If the unit is unable to sense usable pulses within three seconds or ifyou do not set a rev point within 30 seconds of beginning the setup,IntelliMute or IntelliMute Pro will indicate an error. If you d...

The Compass temporarily may not provide accurate readings if you are inside abuilding or enclosure, or are close to a large metal tractor/trailer, truck or train.Once you are away from such a location, the Compass will work correctly again. If the Optional GPS Locator is installed and receiving a si...

Settings Your Detector Nothing Comes Close to a Cobra ® 23 Settings Your Detector 22 English SmartPower Mode Your detector includes the SmartPower feature that, when turned On, will put the unit into Low Power mode 15 minutes after the car’s engine has been turned Off. Before SmartPower enters Low P...

Spectre I & IV+ Alerts Police use radar detector detectors (RDDs) to spot users of radar detectors. Your detector is able to identify signals from Spectre I and Spectre IV+ RDDs and can provide alerts when any of these or similar devices are in use nearyour vehicle. Your detector can be spotted ...

Detection Your Detector Nothing Comes Close to a Cobra ® 27 Detection Your Detector 26 English NOTE Beep rate changes with different laser alerts. Laser Signals and Visual Displays LTI 20-20* LTI Ultra-Lyte* Kustom SignalsProLaser* Kustom SignalsProLaser III* Strobe and Safety Alert Signals and Visu...

Understanding Radar and Laser Your Detector Nothing Comes Close to a Cobra ® 29 Detection Your Detector 28 English Description Interpretation RecommendedResponse Tone repeats slowly at first,then speeds up rapidly. Probably police radar. FULL ALERT Tone sounds one time only. Probably a false alarm, ...

Maintenance Your Detector Nothing Comes Close to a Cobra ® 31 Understanding Radar and Laser Your Detector 30 English Strobe Alert Special strobes mounted on the light bars of authorized emergency vehicles (fire trucks, police cars, ambulances) automatically change trafficsignals as the vehicle appro...

Optional Global Position System Locator Optional GPS Locator Nothing Comes Close to a Cobra ® 33 Specifications Your Detector 32 English Specifications • Band and Frequencies Band Frequencies X Band 10.525 ± 0.050 GHz K Band 24.125 ± 0.125 GHz Safety Alert 24.070 ± 0.010 GHz Traffic Warning 24.110 ±...

GPS Locator Status The GPS icon changes to indicate received signal status: NOTE When GPS signal is lost at the Speed and Lat/Lon screens, the satelliteicon will change and the data lines will be filled with dashes. Initial Satellite Lock • When the Optional GPS Locator is first used or after a prol...

IntelliScope Alert Signal Sequence When You Turn Toward The Location While approaching a Photo Enforcement Location involving a turn onto across street where it is located. IntelliScope • Optional Global Position System Locator Optional GPS Locator Nothing Comes Close to a Cobra ® 37 Optional Global...

Optional Global Position System Locator and Accessories 38 English Product Service Product Service • For any questions about operating or installing this new Cobra product, or ifparts are missing… PLEASE CALL COBRA FIRST… do not return this product to the store. See customer assistance on page A1. I...

Warranty Warranty 40 English Limited 1-Year Warranty • For Products Purchased in the U.S.A. Cobra Electronics Corporation warrants that its Cobra 15 Band Radar/Laser Detectors, and the component parts thereof, will be free of defects inworkmanship and materials for a period of one year from the date...