Page 2 - For Charging microTALK; O P E R AT I O N; Product Information; English; Radio Power; To Turn Your Radio On:; Battery Low Indicator; WARNING: Only the supplied
NOTE: Estimated operation time on full charge: 12 hours. These rechargeable batteriesmust be recycled or disposedof properly in compliance withall applicable laws. They mustnot be thrown in the rubbish bin. Some countriesand local authorities require recycling and haveestablished collection programs...
Page 3 - NOTE: Both radios must be tuned to the same; To Temporarily Turn Off Auto Squelch:; NOTE: Both radios must be; To Use the Lock Function:
O P E R AT I O N Listening for a Response Release the TALK button toreceive incoming transmissions.Your microTALK ® is always in LISTENING MODE except whenthe TALK, CALL or MODEbuttons are pressed. To Adjust Volume Press the VOLUME UP or theVOLUME DOWN buttons.A double beep sound is used toindicate ...
Page 4 - Earbud Microphone; To Select a CTCSS Privacy Code:; CTCSS Privacy Codes; NOTE: If you are using a CTCSS privacy code, both; DCS Privacy Codes; NOTE: If you are using a DCS
O P E R AT I O N a n dM O D E F U N C T I O N S External Speaker/Microphone/Charge Jack Your microTALK ® radio can be fitted with an externalspeaker/microphone, freeingyour hands for other tasks. To Attach the ExternalSpeaker/Microphone orCharger: 1. Open the charge tab on top of the radio.2. Insert...
Page 5 - Channel Scan; NOTE: The radio ignores specific CTCSS or DCS; To Set the VOX Sensitivity Level:
M O D E F U N C T I O N SO P E R AT I O N 3. When your desired privacy code is displayed, choose one of the following: a. Press the MODE button to enter the new setting and proceed to other functions. b. Press the LOCK button to enter the new setting and return to LISTENING MODE. c. Do not press any...
Page 6 - CTCSS Privacy Code Scan; To Scan Privacy Codes:; DCS Privacy Code Scan; To Scan DCS Privacy Codes:
M O D E F U N C T I O N SO P E R AT I O N c. Press the LOCK button to return to LISTENING MODE on either the channel orchannel/privacy code that was displayedbefore you entered Mode Functions or thechannel on which, during scanning, you lasttransmitted or received. CTCSS Privacy Code Scan Your micro...
Page 7 - Dual Watch; NOTES: To terminate Dual Watch and proceed
M O D E F U N C T I O N SO P E R AT I O N During Scanning (While Receiving anIncoming Transmission), You Can Choosefrom the Following: a. Press and hold the TALK button to communicate on that channel/privacy code.Your radio will remain on thatchannel/privacy code and return toLISTENING MODE. b. Pres...
Page 8 - To Turn Dual Watch On:; NOTE: Dual Watch Location 2 must be; To Terminate Dual Watch:; Baby Monitor; To Turn Baby Monitor On:; NOTES: Pressing the MODE
M O D E F U N C T I O N SO P E R AT I O N To Turn Dual Watch On: NOTE: Dual Watch Location 2 must be programmed to turn Dual Watch on. 1. Set the first Dual Watch Location (channel/privacycode) you wish to monitor(see “Channels,” “CTCSSPrivacy Codes” and “DCSPrivacy Codes” sections for further detai...
Page 9 - To Terminate Baby Monitor Mode:; 0 Call Tone Settings; To Turn “Roger Beep” On or Off:
Not pressing any buttons for 15 secondswill enter the Baby Monitor Mode settingas Off and return the radio to LISTENINGMODE. NOTE: Both radios must be tuned to the same channel and privacy code to communicate. To Terminate Baby Monitor Mode: Choose one of the following: a. Press the TALK button and ...
Page 10 - Keystroke Tones; To Turn Keystroke Tones On or Off:; Declaration of Conformity; Warranty & Customer Service
English D . O . C . , WA R R A N T Y& C U S T O M E R S E R V I C E Keystroke Tones With Keystroke Tones turned On, your radio willsound beeps each time you press a button orchange a setting. To Turn Keystroke Tones On or Off: When you turn On your microTALK ® radio for the first time, Keystroke...
