Cobra CXT400C - Manuals

To briefly turn off auto squelch: Press the Light/Max Range button for less than five seconds. If you hear two beeps, you have turnedthe maximum range extender on (see below). To turn maximum range extender on: Press and hold the Light/Max Range button for at least five seconds until you heartwo bee...

Customer Assistance Warranty Introduction 9 Nothing Comes Close to a Cobra ® Operation 8 English Mode Functions Scrolling through Mode Functions • By scrolling through the Mode Functions , you will be able to select or turn on/off preferred features of your microTALK radio. When scrolling through th...

3. The All Hazards Radio icon will continue to be displayed when All Hazards Radio is on . Choose one of the following: a. Press the Mode/Lock button to proceed to other functions. b. Press the Enter/Hi-Low button to exit All Hazards Radio channel mode and return to Standby mode. c. Press Talk butto...

Customer Assistance Warranty Introduction Operation 12 English Mode Functions The current sensitivity level is displayedwith letters “LE” and a Number 01through 05, with Number 05 being themost sensitive level and Number 01being the least sensitive level. 2. Press the Channel Up or Channel Down butt...

While de-programming a memory location, if you do not pressany buttons for 15 seconds, your radio will automatically returnto Standby mode on the channel/privacy code displayed before you entered mode functions. Channel Scan • Your microTALK radio can automatically scan channels. To scan channels: 1...

The Scan icon will continue to be displayed when privacy code scan is on . Your radio will continue to scan privacy codes and stop as anincoming transmission is detected. Your radiowill remain on that channel/privacy code for10 seconds. While setting privacy code scan, if you do notpress any buttons...

Customer Assistance Warranty Introduction 19 Nothing Comes Close to a Cobra ® Operation 18 English Mode Functions Memory Location Scan • Your microTALK radio can automatically scan up to10 programmed Memory Locations . If there are one or fewer memory locationsprogrammed in your radio, the scan memo...

Roger Beep Confirmation Tone • Roger Beep is an audible tone that your listener will hear when you release the Talk button. This alerts the other party that you are finished talking and it is OK for them to speak. To turn roger beep on or off:1. Press the Mode button until the Roger Beep icon flashe...

Introduction Operation 23 Nothing Comes Close to a Cobra ® LICENSING • For Products Used in Canada Industry Canada Notice Operation is subject to the following two conditions: 1) this devicemay not cause interference, and 2) this device must accept anyinterference, including interference that may ca...

24 English Safety and TrademarkAcknowledgement Safety Safety Information for microTALK ® Radios • Your wireless handheld portable transceiver contains a low powertransmitter. When the talk button is pushed, it sends out radiofrequency (RF) signals. The device is authorized to operate at a dutyfactor...

NOTES Notes Notes 26 Nothing Comes Close to a Cobra ®