Cobra CXR725C - Manuals

Customer Assistance Warranty Introduction 5 Operation 4 Using Your Radio Channels • With the radio on , select any of the 22 channels by pressing the Channel Up or Channel Down button. Both radios must be tuned to the same channel to communicate. Channels 1 through 7 are shared by FRS and GMRS. Chan...

7 Customer Assistance Warranty Introduction Operation Speaker/Microphone/Charge Jack • Your microTALK radio can be fitted with an external Speaker/Microphone , freeing your hands for other tasks. This same jack also serves as the connecting point for the wall charger/adapter. To attach a speaker/mic...

Customer Assistance Warranty Introduction 9 Operation 8 Mode Functions Scrolling through Mode Functions • By scrolling through the Mode Functions , you will be able to select or turn on/off preferred features of your microTALK radio. When scrolling through the Mode Functions , your radio features wi...

Customer Assistance Warranty Introduction Operation 10 Mode Functions Operation 11 Set DCS Privacy Codes • To select a DCS privacy code:1. After selecting a channel, press the Mode button until the DCS icon appears and the small numbers flash on the display (01 through 104). NOTE If CTCSS is turned ...

Voice Activated Transmit (VOX) • In VOX mode, your microTALK radio can be used “hands-free,” automatically transmitting when you speak. You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise. To turn VOX mode on or off: 1. Press th...

Customer Assistance Warranty Introduction 17 Operation 16 Mode Functions Operation Channel Scan • Your microTALK radio can automatically scan channels. To scan channels:1. Press the Mode button until the Scan icon and the channel numbers flash on the display. 2. Press the Channel Up or Channel Down ...

Customer Assistance Warranty Introduction 19 Operation 18 Mode Functions Operation Privacy Code Scan • Your microTALK radio can automatically scan the Privacy Codes (either CTCSS 01 through 38 or DCS 01 through 104) within one channel. Only one set of privacy codes (CTCSS or DCS) can be scanned at a...

Customer Assistance Warranty Introduction 21 Operation 20 Operation Memory Location Scan • Your microTALK radio can automatically scan up to 10 programmed Memory Locations . If there are one or fewer memory locations programmed in your radio, the scan memory locations option will not be available. T...

23 Mode Functions 22 VibrAlert and Call Alert • Your microTALK radio can alert you to incoming signals by sounding an audible call tone, by vibrating silently or both. To change call settings:1. Press the Mode button until the Call Setting icon flashes on the display. The current setting (“01” vibra...

Customer Assistance Warranty Introduction 25 Operation 24 10 Call Tone Settings • You can choose from 10 different call tone settings to transmit a unique call alert. To change a call tone setting:1. Press the Mode button until the letter “C” and the current call tone number (01 through 10) is displ...

Operation Customer Assistance Warranty Introduction 27 26 General Specifications and FCC License LICENSING • For Products Used in Canada Industry Canada Notice Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interfer...

29 Introduction Safety Information for microTALK ® Radios • Your wireless handheld portable transceiver contains a low power transmitter. When the talk button is pushed, it sends out radio frequency (RF) signals. The device is authorized to operate at a duty factor not to exceed 50%. In August 1996,...