Cobra CJS 50 - Manuals - manualsarea.com

Page 2 - Customer Assistance

14 Introduction Introduction A3 A2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Buttons, Switches &Indicatiors 1. USB power port 2. USB power indicator 3. USB/LED power switch 4. Charging indicator 5. Charging completeindicator 6. Charging jack 7. Battery level indicators 8. Battery level button 9. Ba...

Page 3 - How to Use Your

How to Use Your Cobra CJS 50 Contents Introduction ...........................................................................................A1 Our thanks to you What’s included Buttons, Switches & Indicators ..................................................A2 Customer Assistance.................

Page 4 - The following conventions are used in this manual:; WARNING: Shock hazard

Introduction Introduction 3 2 Important: Please be sure to read and save the entire manual before using your mobile power pack. Any misoperation or misusing may damage the equipmentor create hazardous conditions for the user. Please keep this manual for futurereference. The following conventions are...

Page 5 - WARNING: Risk of explosion, fire or burns; Precautions when working with batteries; WARNING: Explosion and fire hazard; manufacturer of the equipment in which the battery is installed.

Introduction Introduction 5 4 WARNING: Fire hazard The jump start feature is designed for short term operation only- less than 5seconds. Operating the jump start feature for more than 5 seconds maycause damage to the unit. Allow the power pack to cool down for at least 3minutes after each jump start...

Page 6 - Controls and Indicators:; Battery Value

Introduction Introduction 7 6 Controls and Indicators: 1. USB power port Provides 5 volt output voltage for consumer electronics devices. 2. USB power indicator Illuminates when USB port is in use. 3. USB/LED power switch If the switch is flipped left, the USB port can provide power. Flipped right, ...

Page 7 - 2V DC appliances; started. Ensure that the unit’s jump start power switch is “OFF”.

Operation Operation 9 8 12V DC appliances The power pack can operate one 12V DC auto, RV, marine, or other portable DCappliance that draws 10 amps or less from its DC socket. The combined loadmust not exceed 120 W, The less combined wattage used, the longer the powerpack will operate before rechargi...

Page 8 - Recharging the power pack battery; Problem

Troubleshooting 11 Operation 10 Recharging the power pack battery CAUTION: Do not operate DC appliance while the power pack is being charged. Charging with the AC charging adapter Using the AC charging adapter is the simplest method for recharging thebattery. While charging from an AC source, the ch...

Page 9 - Internal battery charging controller system:; ...do not return this product to the store.

Product Service Specifications 13 12 12 DC Power: Internal battery (Capacity/Type) 7Ah/12V sealed lead-acid battery DC power socket (maximum continuous load) 8A with automatic reset DC fuse 15A Battery: No load current draw <0.5A Operating temperature range 14°F~104°F (-10°C~40°C) Storage tempera...