Cobra CIR 1000 A - Manuals

3 Internet Radio Quick start Guide What you need before you can use your Internet Radio Before you use your Internet Radio, you need the following : LAN Setting: • Make sure the internet environment is ready and the network setting is available for LAN (ADSL or Cable Modem is highly recommended). • ...

4 Controls Overview (a) Unit Front view Control Internet radio FM mode Music Player AUN IN mode Press to turn on/off Radio Press to scroll through Internet Radio, Music Player, FM Mode and Auxiliary Input. Previous Track Play/Pause Next Track Press and hold to save Preset station P1, P2, P3 or P4; P...

6 Connecting to wired network Step 1 - Power up Radio First, connect to your Internet Radio adaptor and ensure the Power LED is lighting up. The Radio can be switched on or off with the STANDBY/ON button. Later, it will say:  Note : Make sure LAN cable is connected to the LAN socket. Step 2 – Choos...

7 Step 3 – Enter Internet Radio mode 1. Press BACK repeatedly to access this mode. Or alternatively, simply press MODE until < Internet Radio Mod e> shows in the display. or  Note : By pressing MODE , you can view Internet Radio, Music player, FM, and Auxiliary Input mode. Step 4 – Enter Netw...

8 Connecting to wireless network Step 1 – Choose Wlan Setting  Note : a. Unless you set your internet to LAN connection, it will automatically choose WLAN connection, and then skip to step 2 below. b. If you have set it to LAN, you may need to do a small operation as follows: 1. Refer to page 6 “ch...

9 Step 3 – Entering A Network  In some cases the Radio may find more than one network. Rotate the Scroll knob to cycle through the name list, and press this knob when the name of your network is displayed  If your network is not configured to request a password (WEP/WPA), the Radio will connect to...

10 It should now successfully connect to your network.  Note : a. WEP/WPA pass codes are case-sensitive. b. The Radio will automatically save the WEP/WPA code. Therefore , it is not necessary to re-enter it unless you perform a < Factory reset >. Or, if it says: or If this happens, please fol...

11 How to add stations to ‘My favourites’  1. visit website: http://www.wifiradio-frontier.com  2. Click on the register link.  3. To create account login, you need to input your radio’s Access Code (refer to page 10).  Note : When visiting this website as a member, please remember your register...

12 How to add stations to ‘My Added Stations’  1. visit website: http://www.wifiradio-frontier.com  2. Login as a member(see previous page to register).  3. You will now be able take advatage of various additional features and services offered by the Frontier Internet Radio Portal.  4. Two steps...

13 Choosing a station After your radio has successfully connected to the network, you are now ready to select a station. 1. Rotate the Scroll knob to < Stations >, and press to confirm.  Note : There are five options available to select a station. 2. Rotate the Scroll knob to your desired opt...

14 Music Player Operation Mode  Note : To operate this function, please first read the appendix on page 27. 1. Switch your radio on and press MODE repeatedly until < Music Player Mode > appears. Or enter <MAIN MENU>, and rotate the Scroll knob to < Music Player >, and then press t...

15 FM Operation Mode 1. Press the MODE button repeatedly until < FM Mode > appears. Or enter < Main menu >, rotate the Scroll knob to < FM >, and then press to confirm. 2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise, the last FM s...

16 Setting Station Presets Your radio can store 4 Internet station presets and 4 FM station presets respectively. To store the current station: Press and hold any one of the 1-4 button for 2 sec., and it will display ‘Preset stored’: Selecting a Preset station To select a stored station: 1. Enter co...

17 AUX IN Operation Mode 1. To listen to an external audio source, press the MODE button repeatedly until < Auxiliary Input Mode > appears in the display. Or enter < Main Menu >, and then rotate the Scroll knob to < Auxiliary Input >, and press to confirm. 2. Connect one end of the...

18 General Operations Setting the Clock 1. At < Main menu > subdirectory, rotate the Scroll knob to < System setup >, and press to confirm. 2. Rotate the Scroll knob to < Time setup >, and press to confirm. 3. With the cursor pointing to < Set clock >, press to confirm. It wi...

20 Sleep Function 1. At < Main menu > subdirectory, r otate the Scroll knob to < Sleep >, and press to confirm. 2. Rotate the Scroll knob to define the sleep period between 0 – 90 minutes, and press to confirm.  Note : a. The time interval is 15 minutes per step. b. The program will tur...

21 Setting Alarm  Note : Before setting the alarm, please set the time first. 1. At < Main menu > subdirectory, r otate Scroll knob to < Alarms >, and press to confirm. 2. Rotate Scroll knob to choose an alarm, and press to confirm. 3. With the cursor pointing to ‘ Time: 12:00 AM ’, pre...

23 Snooze Function  Note : The snooze function is an option related to the Alarm function. 1. At < Main menu > subdirectory, rotate the Scroll knob to < Snooze >, and press to confirm. 2. Rotate the Scroll knob to define the snooze period which is between 5 – 30 minutes, and press to co...

24 SW Version and Radio ID  Note : This information may be required when dealing with technical issues. 1. It can be activated from < Main menu >  < Info >, press to confirm. 2. With the cursor pointing to < SW version >, press to confirm. 3. To obtain the radio ID, rotate the Sc...

25 System Setup Operations Network setup  The purpose of doing is: a. To enable you to scan again for connection to another wireless network, b. To let you manually configure the network parameters. c. To let you take your radio to another location where you want to use it. 1. It can be activated f...

26 Factory reset  Note : doing this will completely erase WEP/WPA codes and all user settings, and return the Radio to its default factory settings. 1. From < Main menu >  < System setup >  < Factory reset >, press to confirm. 2. Press the INFO button to reset.  Note : If you w...

27 Appendix Step 1: Setting Up Media Sharing in WMP 11 After you download and install Windows Media Player 11 for Windows XP and connect your Radio to the network, you need to set up media sharing so that you can share music with your Radio. The following steps describe how to set up media sharing i...

28 Check the “ share my media to ” box. In the list, click your Radio * , click Allow , the selected device will show a green tick and then click OK . * If your device does not appear in the list of devices, perform the following steps ; From the "Media Player" menu of your internet Radio se...

29 Set Up Media Sharing in MAC OS Using the Radio with a MAC will require Windows File Sharing. MAC OS 9 and earlier versions of the OS will need extra software to use Windows File Sharing, but MAC OS X 10.2 and later versions have Windows File Sharing built into the OS. Set up Windows File Sharing ...

30 Troubleshooting If you experience any trouble with your wireless Internet Radio, then you may find it useful to visit the help section on our webpage: http://www.wifiRadio-frontier.com If you have trouble connecting the Radio to your wireless network, these steps may help to resolve the problem: ...

31 Specification ITEMS DESCRIPTION Specifications: Internet Radio with FM Power Requirements: US version: AC Power Input: 120VAC, 60HZ EU version: AC Power Input: 230VAC, 50HZ In use, please refer rear panel silk-screen Frequency Range: 87.5-108MHz Rated Output Power: 5Wrms Speaker: 8 ohm Headphone ...

32 y p o C d e r i u q e R r e d i v o r P P I y g o l o n h c e T mp3 format Thomson Licensing "MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson" MPEG-4 HE-AAC Fraunhofer "MPEG-4 HE-AAC audio coding technology licensed by Fraunhofer IIS. http://www.iis.fraun...