Congratulations on your purchase of a Cli~Mate Bladeless Fan with Air Filtration Delivers a refreshing stream of cool air whilst the built-in Air Filtration helps to improve the quality of the air in your home. Note: Please read through the instructions carefully before using or installing the produ...
Page 3 - SAFETY PRECAUTIONS
INSTALLATION AND OPERATING INSTRUCTIONS 1 SAFETY PRECAUTIONS Read all instructions carefully. • All components need to be installed in accordance with the user manual instructions for correct per formance of unit • This appliance should be used in conjunction with a safety switch • This appliance is...
Page 4 - PRODUCT SPECIFICATIONS
2 INSTALLATION AND OPERATING INSTRUCTIONS PRODUCT SPECIFICATIONS System Specifi cations CLI-AP-BF Bladeless Fan with Air Filtration Model Code CLI-AP-BF Power Output DC 24V 1.5A 36W Power Input Australia / New Zealand 100-240V 50/60Hz Air Flow 516m 3 /h Replacement Filter Code CLI-APBF-RF N.W 2 kgs ...
Page 5 - UNIT COMPONENT IDENTIFICATION
INSTALLATION AND OPERATING INSTRUCTIONS 3 1. Power button ON/OFF 2. Fan speed knob (7 Speeds - Turn knob clockwise to increase speed. Turn anti-clockwise to decrease speed. ) 3. Power indicator light4. Oscillation button 5. Air inlet and fi lters (left side not shown)6. Air outlets 7. LED illuminati...
Page 6 - Oscillation; Switch unit On or Of f.; LED Colour Selection; (LED will star t at the last set program); LED light mode settings; Press to turn on default light.; REMOTE CONTROL COMPONENT IDENTIFICATION
4 INSTALLATION AND OPERATING INSTRUCTIONS 1. Oscillation 110° oscillation range. Press button again to lock current position. 2. Power On/Off Switch unit On or Of f. 3. LED Brightness (12 levels) a. Increases brightness b. Decreases brightness 4. LED Colour Selection Select the colour of the LED lig...
Page 7 - TILT FUNCTION; Before carr ying out any maintenance or cleaning of the; External cleaning of unit:; • Wipe the body of the unit with a dr y or damp cloth only
INSTALLATION AND OPERATING INSTRUCTIONS 5 TILT FUNCTION To adjust the air fl ow angle, hold the base and tilt the fan backwards or for wards (up to 15°) CLEANING AND MAINTENANCE WARNING: Before carr ying out any maintenance or cleaning of the unit, make sure that the power to the unit is turned of f...
Page 8 - CLEANING AND REPLACEMENT OF FILTERS; Cleaning Filters
6 INSTALLATION AND OPERATING INSTRUCTIONS CLEANING AND REPLACEMENT OF FILTERS Cleaning Filters It is recommended that the fi lters are cleaned monthly. 1. Remove the fi lters. See ‘Removing Filters’ section. 2. Run a vacuum cleaner with a nozzle or brush attachment on low power setting along the blu...
Page 9 - TROUBLE SHOOTING; Problem
INSTALLATION AND OPERATING INSTRUCTIONS 7 TROUBLE SHOOTING BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLE SHOOTING TIPS FIRST. Problem Possible Causes What To Do No power 1. Unit is not plugged into wall socket. 1. Check connection to wall socket. Reduced air fl ow 1. Air inlet or air outlet ...
Page 10 - Conditions Of This Warranty:; This product has been fully installed in accordance with the; Please keep purchase receipt in a safe place.
8 INSTALLATION AND OPERATING INSTRUCTIONS Your Aquaport Australian 12 Month Repair or Replacement Warranty Aquapor t warrants this appliance to the fi rst purchaser and subject to the stated conditions:Warranty covers any defects in material or workmanship in the manufactured product within the fi r...
