2 - Table of contents - General Safety Warnings ............................................................................................................. Care/Maintenance………………………………………………………………………………………. Before use …….................................................................................
Page 3 - General Safety Warnings; Working area safety
3 1. General Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Keep this manual readily accessible for reference. ■ Working area safety - Keep working area clean and well l...
4 4. Product Information ■ Outline ■ Packing List - Electric screwdriver - Power cord - Bits (2) - Replacement carbon brush (2) - Torque cover - Instruction manual ■ Specifications Model AT-3681 AT-3682 AT-5681 AT-5682 AT-6681 AT-6682 Power source VAC 115 60HZ 230 50HZ 115 60HZ 230 50HZ 115 60HZ 230...
Page 5 - Figure 1
5 5. Operation - Connect the power cord to the driver as shown below, twist the knob on the power cord to secure it onto the driver. Do not force the connection as this can cause damage to the driver and power cord. - To avoid accident and injury, check driver’s torque setting, and make sure that th...
Page 6 - Fastening and removing screw; REV position. Press down the screwdriver vertically.; screwdriver has completely stopped.; Unplug the driver before changing the carbon brush.
6 Fastening and removing screw : To drive a screw, set the forward/reverse switch to the FWD position. To remove a screw, set the switch to the REV position. Press down the screwdriver vertically. Note: Do not change the running direction during operation. Always switch the direction after the screw...
Page 7 - the unit. Contact our customer service as soon as possible.; If the screwdriver does not run; Check the outputting power.; If the screwdriver is not rotating normally
7 6. Troubleshooting If the screwdriver does not work properly, check the list below. If you cannot solve the problem do not open the unit. Contact our customer service as soon as possible. If the screwdriver does not run - Check the outputting power. - Check whether the plug is inserted properly an...
