Page 2 - Start by Reading These Important Safety Instructions; Before You Begin; Contents; Page; Door Types; One-Piece Door with Horizontal Track Only.
1-GB The Protector System must be installed when theforce at the edge of the closing door force exceeds400N (40kg). Excessive force will interfere with theproper operation of the Safety Reverse System ordamage the garage door. Permanently fasten the caution label adjacent to the wall-mounted door co...
Page 4 - at the top inside face of door as shown. Mark holes.
3-GB 3 Connect Electric Power TO AVOID INSTALLATION DIFFICULTIES, DO NOT RUN THEGARAGE DOOR OPENER UNTIL INSTRUCTED TO DO SO. Connect the door opener only to an outlet controlled by a doublepole switch. Install Light Gently pull lens (2) downward until the lens hinge is in the fully openposition. Do...
Page 5 - Install Door Control; Operation of the Door Control; Install the Protector System; D. Mounting and Wiring the Safety Sensors; • Run wires from both sensors to opener. Use insulated staples to
4-GB 4 Install Door Control Locate door control where the garage door is visible, away fromdoor and door hardware and out of the reach of children. Mountat least 1,5 m (5 feet) above the floor Serious personal injury from a moving garage door may resultfrom misuse of opener. Do not allow children to...
Page 7 - To program the travel limits:; ADJUSTMENT SECTION; Setting the Force
6-GB 6 114A2804E-GB Test the Safety Reverse System The safety reverse system test is important. Garage door mustreverse on contact with a 40mm obstacle laid flat on the floor.Failure to properly adjust opener may result in serious personalinjury from a closing garage door. Repeat test once a month a...
Page 10 - Opening the Door Manually:
9-GB 9 Once a Month: • Repeat safety reverse test. Make any necessary adjustments. • Manually operate door. If it is unbalanced or binding, call for professional garage door service. • Check to be sure door opens and closes fully. Set Limits and/or Force if necessary. Once a Year: Oil door rollers, ...
Page 11 - voltage push button wiring.; Dimensions; SPECIFICATIONS
10-GB 10 Input Voltage...................230-240 VAC, 50HzMax. Pull Force ..............700N (ML700-GB, ML750-GB) ........................................800N (ML850-GB) Power .............................115W (ML700-GB, ML750-GB) ........................................125 (ML850-GB) Standby-by pow...
Page 12 - GARAGE DOOR OPENER WARRANTY
11-GB GARAGE DOOR OPENER WARRANTY Chamberlain GmbH warrants to the first retail purchaser of this product that the product shallbe free from any defect in materials and/or workmanship for a period of 24 full months (2years) from the date of purchase. The motor is warrantied to be free from defects i...
Page 13 - Illustrations
Illustrations – Garage Door Operator Model ML700-GB, ML750-GB and ML850-GB GB 114A2884D
Page 27 - Pb
15 114A2884D 41B4491-1 NOTICE 41A2828 12B374 178B34 178B35 178B69 41B4616 4A1008 83A11 41A5643-1 12VD C Pb Cd Hg 12B380 12C778 41A5800 12C788 183D177 183D178 41A5887 41A5060-10 10A20 216A206 31D536