Casio WK-3200 - Manuals - manualsarea.com

Page 5 - Part VIII Setting Values and Send/Receive Values

5 40.25 Algorithm 24 (18H) : Reverse Gate Reverb ........................................................................................ 69 40.26 Algorithm 25 (19H) : Reflection .......................................................................................................... 69 40.27 Algor...

Page 7 - Part I; MIDI Message Overview; Product Configuration as a MIDI Device; Controller Block

7 Part I MIDI Message Overview 1 Product Configuration as a MIDI Device This Model consists of a controller block and a sound source block as described below. • Controller Block – Keyboard – Pedals, wheels, and other real-time controllers – Auto accompaniment – Song Memory – SMF Player – Parameter e...

Page 8 - Sound Source Common Sub-blocks; Sound Source Instrument Part Sub-block; Conditions that Disable Message Send and Receive

8 1.3 Sound Source Common Sub-blocks The Sound Source Common Sub-blocks include sound source settings that are not dependent on sound source parts; namely effectors, a mixer, and a drawbar organ waveform synthesizer. Basically, common sub-block parameters can be controlled using System Exclusive mes...

Page 9 - Different Operations Depending on Part Mode; Part II; Channel Message; Receive Channel

9 4 Different Operations Depending on Part Mode Each Part Mode (see 12.1 "About the Part Mode"), which is the sound source operational mode, has different messages for performing operations upon receipt. Each message is explained in the applicable message sections of this document. Part II C...

Page 10 - Note On; Polyphonic Key Pressure; Control Change

10 8 Note On Format Send Sent when something is played on the keyboard. Receive Received over MIDI Channels that correspond to each part. Any part whose mixer channel is turned off is not received. 9 Polyphonic Key Pressure Format Send Operation This message is not sent. Receive Operation This messa...

Page 23 - Mode Message

23 11 Mode Message 11.1 All Notes Off (7BH) Format 11.2 Omni Off (7CH) Format 11.3 Omni On (7DH) Format 11.4 Mono (7EH) Format 11.5 Poly (7FH) Format Send These messages are never sent. Receive Receipt of any of these messages releases (same as releasing the keyboard key) the currently sounding voic...

Page 24 - Program Change; About the Part Mode; Channel Aftertouch; Pitch Bend

24 12 Program Change Format Send Sent when a tone is selected. See the "Tone List" of this Model's User's Guide for details about program numbers. Receive Receipt changes the tone of the part corresponding to the MIDI Channel. The selected tone is determined by the program value of this mess...

Page 25 - Part III; System Message; Active Sensing; System Exclusive Message; Universal Realtime System Exclusive Message

25 Part III System Message 15 Active Sensing Format Send This message is never sent. Receive When this message is received once, the Active Sensing mode is entered. If no MIDI Message is received for a particular amount of time, voices being sounded by this Model's sound source are released, control...

Page 31 - Part IV; This Model's System Exclusive Messages; Message Classifications

31 Part IV This Model's System Exclusive Messages 17 Format 17.1 Message Classifications This Model's SysEx operations are classified as Parameter type for send and receive of an individual Parameter, and Parameter Set type for Bulk send and receive of a set of parameters. These SysEx types can be f...

Page 32 - Message Structures

32 17.2 Message Structures This Model's System Exclusive Messages is formed of the 13 fields shown below. Whether or not a particular field is included in a message and the length of each field depends on the message. The minimum unit for the length of each field is bytes. If two values are containe...

Page 38 - Communication Protocols

38 18 Parameter Operations There are two parameter operations: Individual Parameter Transfer and Individual Parameter Request. A single session is concluded when this Model sends an IPC (Individual Parameter Change) in response to an IPR (Individual Parameter Request) from an external device, or whe...

Page 39 - One-way Protocol Communication Flow

39 19.1.2 Session and Subsession Subsession One Parameter Set can be transferred per subsession. Subsession transfers one Parameter Set or data that is broken down into multiple packets for transfer, with EOD (End of data) sent at the end to terminate the send.Data is broken down into multiple packe...

Page 40 - Handshake Protocol Communication Flow

40 19.3 Handshake Protocol Communication Flow A session starts with the receiving device sending a request using an HDR or with the sending device sending HDS data. The sending device does not send the next packet until it receives an ACK from the receiving device. The maximum wait time of at least ...

Page 43 - Part V; Parameter Lists; Command Parameters; System Parameter List

43 Part V Parameter Lists These lists show the parameters that can be transferred individually using System Exclusive Messages. • Note 1: Any parameter that has "r" to the right of its Parameter ID number is a read-only parameter that can be used for obtaining status information only. A para...

Page 44 - Data Management Command Parameter List

44 System Parameter List Note 1: This is the version number of models with the same System Exclusive Model ID = 11-02. This value is used to specify the model for a parameter send request from an external source. Note 2: This is a request to look up and cancel the tone status of parts whose bits are...

Page 46 - Command Parameter List

46 20.3 Command Parameter List System Exclusive Format Setup Parameter List MIDI Parameter List Field Value 01 SYSEX F0 02 MAN 44 03 MOD 11,02 04 dev Either 00 to 1F, or 7F 05 act 00(IPC), 01(IPR) 06 cat Command = 0 07 prm 00-7F 08 ilen/dlen 0 / bit size - 1 09 ps LSB,MSB = 00,00 10 index Part 11 da...

Page 47 - Patch Parameter; Patch Common Parameter List

47 21 Patch Parameter The patch parameter is a temporary area that controls the sound source operation mode. Mixer settings, synthesizer function, DSP function and other editable parameters are also included in these areas. The content of this area is rewritten whenever preset data or user data is s...

Page 51 - Patch Part Parameter List

51 21.2 Patch Part Parameter List This list shows setting parameters that are specific for each part. System Exclusive Format ParamID Parameter bit Value Default Setting Value (Decimal) 38 DSP User Parameter0 07 00-7F - 0-127 39 DSP User Parameter1 07 00-7F - 0-127 3A DSP User Parameter2 07 00-7F - ...

Page 54 - Wave Data Parameters; Wave Data Information

54 22 Wave Data Parameters Wave Data Parameters contain address and size information about expanded waveform data. 22.1 Wave Data Information System Exclusive Format Parameter List Field Value 01 SYSEX F0 02 MAN 44 03 MOD 11,02 04 dev Either 00 to 1F, or 7F 05 act 00(IPC), 01(IPR) 06 cat Wave Data =...

Page 55 - Song Data Parameter; Song Data Information

55 23 Song Data Parameter Song Data Parameters contain address, size, and name information about song sequencer data. 23.1 Song Data Information System Exclusive Format Parameter List Field Value 01 SYSEX F0 02 MAN 44 03 MOD 11,02 04 dev Either 00 to 1F, or 7F 05 act 00(IPC), 01(IPR) 06 cat Song = 0...

Page 56 - Rhythm Data Parameters; Rhythm Data Information

56 24 Rhythm Data Parameters Rhythm Data Parameters contain address, size, and name information about expanded rhythm data. 24.1 Rhythm Data Information System Exclusive Format Parameter List Field Value 01 SYSEX F0 02 MAN 44 03 MOD 11,02 04 dev Either 00 to 1F, or 7F 05 act 00(IPC), 01(IPR) 06 cat ...

Page 57 - SMF Data Parameters; SMF Data Information

57 25 SMF Data Parameters SMF Data Parameters contain address, size, and name information about SMF data. 25.1 SMF Data Information System Exclusive Format Parameter List Field Value 01 SYSEX F0 02 MAN 44 03 MOD 11,02 04 dev Either 00 to 1F, or 7F 05 act 00(IPC), 01(IPR) 06 cat SMF = 10 07 prm 00-7F...

Page 58 - Part VI; Parameter Set List; User Tone Parameter Set; User Timbre Parameter Set

58 Part VI Parameter Set List This list shows the parameter sets that can be transferred using System Exclusive Message Bulk Dump. 26 User Tone Parameter Set System Exclusive Format 27 User Timbre Parameter Set This is the parameter set that is associated with and sent with Tone. System Exclusive Fo...

Page 59 - User Drum Parameter Set; User Voice Parameter Set

59 28 User Drum Parameter Set This is the drum set parameter set. System Exclusive Format 29 User Voice Parameter Set This is the parameter set that is associated with and sent with Timbre. Four voices are associated with one timbre. System Exclusive Format Field Value 01 SYSEX F0 02 MAN 44 03 MOD 1...

Page 60 - User Instrument Parameter Set; User Wave Parameter Set

60 30 User Instrument Parameter Set This is the parameter set that is associated with and sent with Drum. All key numbers are supported, so one drum set is associated with 128 instruments. System Exclusive Format 31 User Wave Parameter Set This is the parameter set that is associated with and sent w...

Page 61 - User DSP Parameter Set; Song Data

61 32 User DSP Parameter Set System Exclusive Format 33 Song Data System Exclusive Format Field Value 01 SYSEX F0 02 MAN 44 03 MOD 11,02 04 dev Either 00 to 1F, or 7F 05 act 04(HDS), 05(HDR), 07(Control) 06 cat DSP = 09 07 prm 00-7F 08 ilen/dlen See "IV This Model's System Exclusive Messages"...

Page 62 - User Rhythm Pattern; Registration Data

62 34 User Rhythm Pattern System Exclusive Format 35 Registration Data System Exclusive Format Field Value 01 SYSEX F0 02 MAN 44 03 MOD 11,02 04 dev Either 00 to 1F, or 7F 05 act 04(HDS), 05(HDR), 07(Control) 06 cat User Rhythm = 0B 07 prm 00 08 ilen/dlen See "IV This Model's System Exclusive Me...

Page 63 - User Drawbar Parameter Set

63 Note 1: The relationship between the "Bank", "Number" and "ps (parameter set)" are as shown below. 36 User Drawbar Parameter Set System Exclusive Format Bank Number ps Bank Number ps 1 1 0020H 5 1 0030H 1 2 0021H 5 2 0031H 1 3 0022H 5 3 0032H 1 4 0023H 5 4 0033H 2 1 0024H ...

Page 64 - SMF Parameter Set

64 37 SMF Parameter Set System Exclusive Format Data Format Bulk dumping SMF data transfers the data with a 128-byte header appended as shown below. The header data starts with an 8-byte file name, which is displayed by this Model after receipt. Field Value 01 SYSEX F0 02 MAN 44 03 MOD 11,02 04 dev ...

Page 65 - Flash Memory Image Parameter Set

65 38 Flash Memory Image Parameter Set This Parameter Set is used for dumping flash memory contents. One Parameter Set corresponds to an image block of 2 Mbytes of flash memory. The 4 Mbytes of flash memory of this Model is made up of two blocks, so two Parameter Sets are used. System Exclusive Form...

Page 66 - Part VII; DSP Parameter List

66 Part VII DSP Parameter List This list shows the parameters for each of the DSP algorithms. U0 to U7 indicate User Parameters 0 to 7, while I00 to I15 indicate Internal Parameters 00 to 15. Parameters for which no setting range is indicated, receipt of a value from 0 to 127 is assigned as-is to th...

Page 76 - Part VIII; Setting Value Table

76 Part VIII Setting Values and Send/Receive Values 42 Setting Value Table 42.1 Off/On Setting Value Table 42.2 Slow/Fast Setting Value Table 42.3 Rotate/Break Setting Value Table 42.4 -24 to 0 to 24 Setting Value Table 42.5 -64 to 0 to 63 Setting Value Table 42.6 Pan Setting Value Table 42.7 -99 to...

Page 78 - DSP Algorithm ID Table

78 42.15 Equalizer Gain Setting Value Table The parameter value is not equivalent to dB (decibels). 42.16 DSP Algorithm ID Table 42.17 Drawbar Position Setting Value Table 42.18 Drawbar Percussion Setting Table Value Transmit Receive -12 00H 00H-04H -11 05H 05H-09H -10 0AH 0AH-0EH -9 0FH 0FH-13H -8 ...

Page 79 - Part IX; Hexadecimal Notation

79 Part IX MIDI Implementation Notation 42.19 Hexadecimal Notation MIDI implementation sometimes requires that data be expressed in hexadecimal format. Hexadecimal values are indicated by the letter "H" after the value. The hexadecimal equivalents of decimal values 10 through 15 are expresse...