Casio QV-3000EX/Ir- Manuals

CONTENTS E-8 CONTENTS INTRODUCTION Congratulations upon your selection of the QV-3000EX/Ir LCD Digital Camera.To get the most out of the QV-3000EX/Ir, be sure to carefully read this manual and follow the instructionscontained in it. E-2 QUICK REFERENCE E-11 FEATURES E-16 PRECAUTIONS E-20 UNPACKING U...

CONTENTS E-10 • CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss resulting from the use of thismanual. • CASIO COMPUTER CO., LTD. assumes no responsibility for any loss or claims by third parties which may arisethrough the use of the QV-3000EX/Ir. • CASIO COMPUTER CO., LTD. ...

FEATURES E-11 FEATURES Simple image management (page E-109) Images are stored on a large-capacity CompactFlash memorycard. A new Card Browser feature produces thumbnails of allimages on a card quickly and easily. Digital Print Order Format (DPOF) (page E-95) Images can be easily printed in the seque...

FEATURES E-12 Movie and panorama images (pages E-62, 64) A buffer lets you capture images of events that occurred beforeyou pressed the shutter button.A built-in function lets you combine up to nine images intobreathtaking panoramas. CASIO original metering system Light metering includes innovative ...

PRECAUTIONS E-16 PRECAUTIONS General Precautions Be sure to observe the following important precautionswhenever using the QV-3000EX/Ir. All references in this manual to “this camera” and “the cam-era” refer to the CASIO QV-3000EX/Ir Digital Camera. • Never try to take pictures or use the built-in di...

PRECAUTIONS E-17 Operating conditions • This camera is designed for use in temperatures ranging from 0 ° C to 40 ° C. • Do not use or keep the camera in the following areas. — In areas subject to direct sunlight— In areas subject to high humidity or dust— Near air conditioners, heaters, or other are...

PRECAUTIONS E-18 About the camera’s backlight… • The camera is equipped with a fluorescent light source to provide the back lighting for its LCD. • The normal service life of the backlight is approximately six years, when the camera is used for about two hours a day. • Should the LCD image appear ab...

PRECAUTIONS E-19 Lens • Camera performance can be adversely affected by finger- prints or dirt on the lens surface. Never touch the lens sur-face with your fingers. • Should the lens become dirty, use a blower to blow off dirt and dust, or a soft, dry cloth to wipe off the lens. • This camera uses a...

UNPACKING E-20 UNPACKING Check to make sure that all of the items shown below are included with your camera. If something is missing, contact your dealeras soon as possible. • Basic Reference • Bundled Software User’s Manual Camera Lens cap/cap holder Soft case Video cable Neck strap Alkaline batter...

UNPACKING E-21 Using the Lens Cap Be sure to attach the lens cap to the lens whenever you arenot using the camera. Be sure to turn off camera power andlet the lens retract into the camera before attaching the lenscover. Attaching the Neck Strap Attach the neck strap as shown in the illustration belo...

UNPACKING E-22 Using the Soft Case Keep the camera in its soft case to protect it when not in use. Monitor screenfacing down. IMPORTANT! • Be sure to keep the neck strap around your neck when using the camera to protect against accidentally drop-ping it. • The supplied neck strap is intended for use...

GENERAL GUIDE E-23 GENERAL GUIDE The following illustrations show the names of each component, button and switch on the camera. Lens (page E-19) Shutter button (page E-47) Exposure sensor (page E-54) Self-timer lamp (page E-26) Viewfinder (page E-51) Flash (page E-54) Terminal panel cover (page E-25...

GENERAL GUIDE E-24 Top and Display MODE RE C O FF PL AY MF/ / / T W MENU SET DISP PREVIEW LCD (page E-28) DISP button (pages E-28, 31) / (FLASH/Tran-P SEND) button (pages E-53, 103) / (FOCUS/Tran-P RECEIVE) button (pages E-60, 61, 103) / (SELF-TIMER/ FOLDER) button (pages E-69, 87) MENU button (page...

GENERAL GUIDE E-25 LOCK OPEN Tripod screw hole Battery compartmentlock (page E-38) Opening the Terminal Panel Cover Battery compartment cover (page E-38) Diopter dial (page E-51) DIGITAL terminal (page E-98) USB port (page E-98) VIDEO OUT terminal (page E-98) AC power terminal (page E-42) Card acces...

GENERAL GUIDE E-27 • The camera is ready to record when the lamp is off. Partial Shutter Button Operation lamp The Operation lamp shows theoperational status of the cameraas described below. MENU MENU Operation lamp REC Mode Flashing One of the following operations is in progress: startu p , s a v e...

MONITOR SCREEN E-28 Pressing DISP causes variousi n d i c a t o r s t o a p p e a r o n t h emonitor screen. DISP PREVIEW DISP button Recording Mode Zoom factor X2 Flash Mode Auto None Flash On Flash OffRed-eyereduction Self-timer 10 SEC, 2 SEC Battery capacity Date and time This information appears...

MONITOR SCREEN E-29 Recording Mode Indicators Auto Focus Frame • Focusing complete: Green • Focusing failed: Red Flash Mode ( ) Screen when shutter is pressed half way • Flash indicator indicates that the flash will fire (when auto flash is selected). IMPORTANT! An out of range aperture or shutter s...

MONITOR SCREEN E-30 PLAY Mode Protect indicator Battery capacity Image number Folder name Date and time (date and time ofrecording) Quality FINENORMALECONOMY Image size 2048 x 15361024 x 768 Folder name – File number Indicator display The indicator display located on the top of the camera alsoshows ...

MONITOR SCREEN E-31 Menu Screens Pressing MENU displays the menu screen. The contents ofthe menu screen depend on whether you are in the PLAYmode or REC mode.There are two menu formats: basic and advanced. The basicmenu displays settings required for basic functions, whilethe advanced menu includes ...

MONITOR SCREEN E-32 Making menu settings 1. While the camera is in the REC or PLAY mode,press MENU. 2. Press DISP to toggle between the basic menuand the advanced menu. 3. Use [ 왘 ],[ 왗 ],[ 왔 ] and [ 왖 ] to select the category or function you want, and then press SET. [ 왘 ] [ 왗 ] [ 왔 ] [ 왖 ] : Item ...

MEMORY CARDS E-33 MEMORY CARDS This camera uses a memory card (CompactFlash card ormicrodrive) for image storage. IMPORTANT! • Make sure that the power of the camera is turned off before you insert or remove a memory card. • When inserting a memory card into the camera, make sure that the card is or...

MEMORY CARDS E-34 IMPORTANT! • Insert only memory cards into the memory card slot. Inserting any other type of card can cause malfunc-tion. • Should water or any other foreign matter get into the memory card slot, immediately turn off power, unplugthe AC adaptor, and contact your original retailer o...

MEMORY CARDS E-35 Formatting a Memory Card You can format a memory card to delete all of the datastored on it. IMPORTANT! • Formatting a memory card deletes all images on the card, even if some or all of the images are protected(page E-89). • Data deleted by a memory card format operation can- not b...

MEMORY CARDS E-36 • Before starting a format operation, load a full set of new batteries (alkaline or lithium) into the camera or connectthe AC adaptor to power the camera. Interruption of cam-era power during the format operation results in improperformatting, making it impossible to use the memory...

MEMORY CARDS E-37 • When you try to save the 251st image to a folder, the cam- era automatically creates a new folder and store the imagethere. • The above maximum numbers of files and folders are ab- solute maximums. The actual numbers of folders and filesmay be less due to memory card capacity and...

POWER SUPPLY E-38 POWER SUPPLY The camera features a two-way power supply that lets youuse either batteries (AA-size alkaline, lithium or Ni-MH) orhousehold AC current. Loading Batteries Be sure that camera power is turned off whenever loading orreplacing batteries. 1. O n t h e b o t t o m o f t h ...

POWER SUPPLY E-39 ● Tips for Prolonging Battery Life • Use the / button to turn off the flash when you are not using it. • You can also use the power save settings (E-43) to protect against wasting battery power when you forget to turn off thecamera. ● Alkaline Battery Life The actual life of alkali...

POWER SUPPLY E-40 Example 2: Low temperatures shorten battery life. Conditions • Temperature: 0 ° C Approximate Battery Life: 7 minutes (7 shots) ● About rechargeable batteries • Use only the nickel-metal hydride batteries (NP-H3) that are available from your dealer as options for this camera. Prope...

POWER SUPPLY E-41 Auto Power Off(Battery Powered Operation Only) Power automatically turns off whenever you do not performany camera operation for a specific period. See page E-43for details about how you can specify the Auto Power Offtime.• To restore power, simply turn power back on again. IMPORTA...

POWER SUPPLY E-42 • Always be sure to use the AD-C620 AC adap- tor only. Using any other AC adaptor can causedamage to the camera not covered by the war-ranty. • When unplugging the AC adaptor from the wall socket, be sure to grasp the adaptor (not thecord). • Avoid any undue bending, pulling, and t...

POWER SUPPLY E-43 Setting SLEEP and AUTO POWER OFF Trigger Times 1. Align the POWER/Function Switch with REC. 2. Press MENU. 3. Select “Options” “Power Save” “Power Save”. • “Options” appears on the advanced menu only. 4. Use [ 왔 ] and [ 왖 ] to select “Sleep” or “Auto Power Off”. 5. Select the trigg...

POWER SUPPLY E-44 Initializing Power Save Trigger Times Use the following procedure to return SLEEP and AUTOPOWER OFF trigger time settings to their initial factory de-faults (SLEEP: 1 minute, AUTO POWER OFF: 2 minutes). IMPORTANT! Note that performing the following procedure to initializethe power ...

SETTING THE CURRENT DATE AND TIME E-45 SETTING THE CURRENT DATE AND TIME Use the following procedures to set the current date andtime, and to select the date format.When you record an image, the time and date the image wasshot is registered in accordance with data from the camera’sbuilt-in clock. Yo...

SETTING THE CURRENT DATE AND TIME E-46 Selecting the Date Format Example: Feb 1, 2000 You can select any one of the following formats for the abovedate: 00/2/1, 1/2/00, 2/1/00. 1. Press MENU. 2. Select “Set Up” “Date” “Style”. 3. Use [ 왔 ] and [ 왖 ] to select the date format you want, and then press...

RECORDING E-47 RECORDING Turning Camera Power On and Off Rotate the POWER/Function Switch to turn camera poweron and off. REC : Turns on power and enters the REC Mode. PLAY : Turns on power and enters the PLAY Mode.OFF : Turns off power. IMPORTANT! • Never turn on power while the lens cap is attache...

RECORDING E-48 Basic Recording Operation The following describes the basic operation for recordingimages. It describes operation in the P (Program AE) Modethat automatically makes the aperture and shutter speedsettings, and lets you record at intervals of about 2 seconds.Note that the interval may b...

RECORDING E-50 Previewing the Last Image Recorded Use the following procedure to preview the last image re-corded, without leaving the REC Mode. 1. Hold down the PREVIEW/ button to display the last image recorded. • The image remains on the monitor screen as long as you keep the PREVIEW/ button depr...

RECORDING E-51 Using the Viewfinder for Recording The illustrations below show what you see when you lookthrough the viewfinder to compose an image for recording. Note that the focus range frame is valid for subjects that areabout three meters away. A different focus range is used forsubjects that a...

RECORDING E-52 2. While keeping the shutter button depressedhalf way, move the camera and compose theimage as you want. 3. Press the shutter button all the way down torecord the image. Using Focus Lock Normally, Auto Focus automatically focuses on the objectthat is inside the Auto Focus Frame. Focus...

RECORDING E-53 Using the Flash You can use the built-in flash unit to provide illumination dur-ing recording. 1. Press / . • Each press of / cycles through the flash mode in the following sequence: Auto (None) On ( ) Off ( ) Red-eye Reduction ( ). Flash button MENU • The monitor screen goes blank an...

RECORDING E-54 Flash Indicator When you press the shutter button half way, the flash iconappears on the monitor screen and the Flash lamp light (am-ber) to indicate that the flash will fire when the shutter buttonis pressed the rest of the way down. IMPORTANT! • Never use the flash in areas where co...

RECORDING E-55 Quality Settings The camera has three quality modes: FINE, NORMAL,ECONOMY.• To determine the number of images that can be stored on a memory card of a different capacity, multiply the capacitiesin the table below, by the appropriate value. • The actual number of images that can be sto...

RECORDING E-56 Exposure Compensation This camera features a program AE function that automati-cally changes shutter speed and aperture in accordance withavailable light. In addition, you can also manually adjust theexposure to compensate for backlighting, indirect indoorlighting, dark backgrounds, a...

OTHER RECORDING FUNCTIONS E-58 This section describes more advanced recording operationsthat are also provided by this camera.• Use the monitor screen for zoom, manual focus, macro, movie, panorama, and multiple exposure. OTHER RECORDING FUNCTIONS Using the Continuous Shutter Mode The Continuous Shu...

OTHER RECORDING FUNCTIONS E-59 Using the Zoom Features The zoom features let you move in closer on subjects thatare located far from the camera. You can choose either opti-cal zoom or digital zoom, or even use them in combination toincrease the size of the original image by 6 times its originalsize....

OTHER RECORDING FUNCTIONS E-60 Manual Focus Manual Focus lets you manually adjust the focus of an im-age. 1. Align the POWER/Function Switch with REC. 2. Press / a number of times until the MF indicator appears on the monitor screen. • Each press of / cycles the focus mode in the following sequence:...

OTHER RECORDING FUNCTIONS E-61 Infinity Mode Recording Use the Infinity Mode when recording images of scenery orobjects that are far away. This mode performs Auto Focus inthe vicinity of infinity ( ). 1. Align the POWER/Function Switch with REC. 2. Press / a number of times until the indicator appea...

OTHER RECORDING FUNCTIONS E-62 Movie Recording You can record movies that are approximately 30 secondslong. Movies are recorded in 320 x 240-pixel AVI format. Fordetails, see “Using the REC Menus” on page E-74.There are two types of movie recording: PAST and NOR-MAL. PAST lets you capture images of ...

OTHER RECORDING FUNCTIONS E-63 4. Press MODE and then select . 5. Compose the image on the monitor screen andthen press the shutter button about half way. • Auto Focus automatically adjusts in accordance with the movement of the subject. • The message “STAND BY” appears on the monitor screen to indi...

OTHER RECORDING FUNCTIONS E-64 Panorama Recording With panorama recording you record a series of images andthen link them to create a single panoramic effect. 1. Align the POWER/Function Switch with REC. 2. Press MODE and then select . 3. Compose the image and then record it. • The right edge of the...

OTHER RECORDING FUNCTIONS E-65 Night Scene Mode The Night Scene Mode is for recording images in dark areas.When recording images of people on a twilight or night timebackground, you can use the flash in combination with theNight Scene Mode for slow synchro recording. 1. Align the POWER/Function Swit...

OTHER RECORDING FUNCTIONS E-66 Landscape Mode Recording The Landscape Mode records images where everything is inclear focus, from the foreground to the background. You canuse the Landscape Mode with the ZOOM slider towards W(wide-angle) to record wide-angle images with clear focusfrom foreground to ...

OTHER RECORDING FUNCTIONS E-67 Aperturevalue Wide Decreased F2, F2.3, F2.8, F4, F5.6, F8 Shutter Speed Priority Image Recording You can fix the shutter speed within the range of 2 to 1/1000second. 1. Align the POWER/Function Switch with REC. 2. Press MODE and then select . 3. Use [ 왔 ] and [ 왖 ] to ...

OTHER RECORDING FUNCTIONS E-68 3. Use [ 왔 ] and [ 왖 ] to select the aperture setting you want to use. 4. Compose the image and then record it. Monochrome and Sepia Recording Use the following procedure to record an image in mono-chrome (black and white) or sepia. Note that you cannot con-vert an ima...

OTHER RECORDING FUNCTIONS E-69 4. Use [ 왔 ] and [ 왖 ] to select “B/W” or “Sepia” and then press SET. 5. Compose the image and then record it. Using the Self-timer You can use the self-timer for either of the two following re-cording operations. 10-second recording .... Records about 10 seconds after...

OTHER RECORDING FUNCTIONS E-70 3. Compose the image and then record it. • The Self-timer Lamp flashes with the passage of each second. • You can cancel a self-timer operation by pressing the shutter button at any time while the Self-timer Lamp isflashing. Performing Manual White Balance Certain ligh...

OTHER RECORDING FUNCTIONS E-71 4. Keeping the camera pointed at the white sheetof paper, press DISP to make the manual whitebalance settings. • Pressing SET at this time returns the camera to the white balance setting that was obtained the last timeyou performed this manual white balance procedure. ...

OTHER RECORDING FUNCTIONS E-72 Mode 1 (Mode Memory 1) Multi Auto Normal Normal Setting at power off Setting Available Options Mode Memory Status P Mode AF Auto Off Setting at power off Recording Mode Focus Flash Digital Zoom P, , , A, S, , , AF, MF, , Auto, , , Off, On On Off Mode 2 (Mode Memory 2) ...

OTHER RECORDING FUNCTIONS E-73 Initializing Power On Defaults and PowerSave Use the following procedure to initialize power on defaultsand the power save settings. IMPORTANT! Note that performing the following procedure to initializepower on defaults also initializes power save triggertime settings ...

OTHER RECORDING FUNCTIONS E-74 Item Initialized Setting Power Save Sleep 1 min Auto Power Off 2 min Mode 1 (Mode Memory 1) Recording Mode Off (P Mode) Focus Off (AF) Flash On (Last mode select) Digital Zoom On (Last mode select) Mode 2 (Mode Memory 2) Metering Off (Multi) White Balance Off (Auto) Fl...

PLAYBACK E-78 PLAYBACK The following describes the different techniques that you canuse to playback recorded images. Basic Playback Operation The built-in monitor screen of the camera lets you play backrecorded images without connecting an external monitor. 1. Align the POWER/Func-tion Switch with P...

PLAYBACK E-79 • To enlarge the movie image so it fills the entire moni- tor screen, press DISP. Pressing the DISP again re-turns the image to its original small size. • Pressing SET during movie play pauses playback. Press SET again to resume playback. • While movie playback is paused, you can use [...

PLAYBACK E-80 • Pressing DISP changes to a small-image display. Press DISP again to return to the full-screen size. • Pressing SET during panorama play pauses play- back. Press SET again to resume playback. • While panorama playback is paused, you can use [ 왘 ] (forward) and [ 왗 ] (reverse) to move ...

PLAYBACK E-81 Using Zoom The following operation lets you magnify an image to twiceand a half its normal size. Note that you can zoom only asingle still image. IMPORTANT! Movie and panorama images cannot be zoomed. 1. Align the POWER/Function Switch with PLAY. 2. Use [ 왘 ] and [ 왗 ] to select the im...

PLAYBACK E-82 1. Align the POWER/Function Switch with PLAY. 2. Press MENU. 3. Select “9 Multi”. • On the advanced menu, select “View” “9 Multi”. • The first image of the set is the image that was on the screen when you performed step 2 of this operation.The other images are those that sequentially f...

PLAYBACK E-83 IMPORTANT! Auto Power Off (page E-41) is disabled whenever SlideShow is being used. This means you should not leaveSlide Show running when using batteries to power thecamera. Doing so can rundown batteries. Be sure tostop Slide Show and turn off the camera after you arefinished. Slide ...

PLAYBACK E-84 Screen Saver The screen saver function automatically activates SlideShow (which automatically scrolls through images)whenever you do not perform any operation for about fiveminutes in the PLAY Mode. This protects the camera’smonitor screen and the screen of a connected TV against“burn ...

PLAYBACK E-85 Zoom BASIC 9 Multi BASIC Slide Show BASIC View Enlarges the image on the monitor screen. Displays nine images on the monitor screen. Automatically scrolls through the images one-by-one. Using the PLAY Menus The PLAY menus provide you with control over the displayformat and DPOF setting...

FOLDER TYPES E-87 Memory Card Folder Precautions The camera automatically creates folders (directories) onthe memory card and assigns them names based on dates(month and day). Any image you record is automaticallystored into the folder that corresponds to the date it is re-corded. • Up to 900 folder...

FOLDER TYPES E-88 FOLDER TYPES Selecting a Folder for Playback 1. Align the POWER/Function Switch with PLAY. 2. Press / . 3. Use [ 왘 ] and [ 왗 ] to select the folder you want to select for playback. 4. Press SET to playback the first image in thefolder.

IMAGE PROTECTION E-89 4. Select the image you want to protect. • Selected images are indicated by . • Repeat step 4 to select other images if you want. 5. After all the images you want to protect areselected, press SET to protect them. Use the following operations when you want to protectimages agai...

IMAGE PROTECTION E-90 Protecting and Unprotecting Folders 1. Align the POWER/Function Switch with PLAY. 2. Press / . 3. Use [ 왘 ] and [ 왗 ] to select the folder you want to protect. 4. Press SET. 5. Press MENU. 6. Select “Tools” “Protect” “Folder”. • “Tools” appears on the advanced menu only. 7. Sel...

DELETING IMAGES E-91 DELETING IMAGES Use the following operations when you want to delete im-ages. You can delete the currently selected image, specifi-cally selected image, all the images in a particular folder orall images currently on the memory card. IMPORTANT! • Image deletion cannot be undone....

DELETING IMAGES E-92 Deleting a Single Image 1. Align the POWER/Function Switch with PLAY. 2. Press MENU. 3. Select “Delete” “Select”. 4. Select the image you want to delete. • Protected images are not displayed. • Note that the first time you display an image its icon is turned on. 5. Press [ 왔 ] o...

DELETING IMAGES E-93 6. After all the images you want to delete are se-lected, press SET to delete them. • Deleting a panorama deletes all of the images that make it up as well. Deleting All the Images in a Folder 1. Align the POWER/Function Switch with PLAY. 2. Press / . 3. Use [ 왘 ] and [ 왗 ] to s...

DELETING IMAGES E-94 Deleting All Unprotected Images 1. Align the POWER/Function Switch with PLAY. 2. Press MENU. 3. Select “Delete” “All”. 4. Select “Yes” to delete all unprotected images,or “No” to abort the delete operation withoutdeleting anything. • When the above procedure is performed while t...

DPOF E-95 Printing Specific Images 1. Align the POWER/Function Switch with PLAY. 2. Press MENU. 3. Select “DPOF” “Select”. • On the advanced menu, select “Tools” “DPOF”. 4. Use [ 왘 ] and [ 왗 ] to select the image you want to print. 5. Press [ 왔 ] or [ 왖 ] to toggle the mark on (print) or off (do not...

DPOF E-96 6. Use [ 왔 ] and [ 왖 ] to specify the number of cop- ies you want to print. • If you want to specify more images for printing, repeat steps 4 through 6. • If you change your mind about printing an image, press [ 왔 ] to clear its mark. 7. After you are finished, press SET to exit the im-age...

DPOF E-97 Printing All Images 1. Align the POWER/Function Switch with PLAY. 2. Press MENU. 3. Select “DPOF” “All” “Set print order”. • On the advanced menu, select “Tools” “DPOF” “All” “Set print order”. • To cancel current print settings, select “Cancel print order”. 4. Press SET. • If you selected...

CONNECTIONS E-98 CONNECTIONS This camera is equipped with a VIDEO OUT terminal forconnection to a television or video deck, and a DIGITAL ter-minal and USB port for connection to a computer or otherequipment. Computer E-100 Television E-99 1 CablesThe type of cable you should use depends on the type...

CONNECTING TO OTHER EQUIPMENT E-99 CONNECTING TO OTHER EQUIPMENT Connecting to a Television Images being displayed on the camera’s monitor screen,whether for recording or playback can also be displayed onthe screen of a connected television. CONNECTING TO OTHER EQUIPMENT 1. Connect one end of the vi...

CONNECTING TO OTHER EQUIPMENT E-100 Connecting to a Computer The following accessories are included with the camera tomake it easy for you to connect to a computer to transfer andmanage your images.• USB cable• USB driver software (on CD-ROM)• Data Transfer Cable• Photo Loader application (on CD-ROM...

CONNECTING TO OTHER EQUIPMENT E-101 CONNECTING TO OTHER EQUIPMENT USB Port Connection IMPORTANT! • Whenever connecting the USB cable to the camera, make sure the arrow mark on the plug is aligned prop-erly with the arrow mark on the side of the camera’sterminal. • Plug the USB connectors into the po...

INFRARED DATA TRANSFER E-103 INFRARED DATA TRANSFER This camera can perform IrDA data communication with digi-tal equipment that supports IrTran-P protocol.Infrared data transfer capabilities let you exchange imagedata with another digital camera without physical connec-tion. • This camera uses IrDA...

INFRARED DATA TRANSFER E-104 E-104 4. Align the infrared port of the receiving devicethat supports IrTran-P protocol. • Position the cameras so they are 10cm to 30cm apart from each other. • T o c a n c e l a n i m a g e d a t a s e n d o p e r a t i o n , p r e s s MENU. Sending Data Transferring a...

INFRARED DATA TRANSFER E-105 Infrared Data Transfer Precautions • Make sure that the infrared ports of the sending unit and the receiving unit are pointed straight at each other, andthat there is nothing blocking the path between them. • To avoid problems that occur due to sudden loss of battery pow...

USING CompactFlash CARDS WITH YOUR COMPUTER E-106 USING CompactFlash CARDS WITH YOUR COMPUTER Setting Up to Access CompactFlash Card Contents From Your Computer You can use any of the three methods described below toaccess the contents of a memory card with your computer.You can use the Photo Loader...

USING CompactFlash CARDS WITH YOUR COMPUTER E-107 Memory Card Data Images recorded with this camera and other data is storedon the memory card using DCF (Design rule for Camera Filesystem) protocol. DCF protocol is designed to make it easierto exchange image and other data between digital camerasand...

USING CompactFlash CARDS WITH YOUR COMPUTER E-108 Image Files Supported by the Camera • Image files recorded with the CASIO QV-3000EX/Ir Digital Camera • DCF protocol image files Certain DCF functions may not be supported. Folder and File Contents • Parent Folder Contents: All files used by the digi...

USING CompactFlash CARDS WITH YOUR COMPUTER E-109 Personal Computer • This camera uses management files to manage the se- quence and attributes of image files. Because of this, add-ing files, deleting files, changing management file con-tents, or changing file sequence and attributes with yourc o m ...

USING CompactFlash CARDS WITH YOUR COMPUTER E-110 3. Use [ 왔 ] and [ 왖 ] to select the Format and then press SET. There are four Card Browser formats. Type1 ........ This is a powerful format that provides de- tailed information about each image andalso includes a Slide Show feature. Type2 ........ ...

USING CompactFlash CARDS WITH YOUR COMPUTER E-111 • This camera generates a Card Browser file whenever you turn off power. When the card in the camera con-tains a large number of files, it may take some time forthe file generation operation to be performed. You canturn off the Card Browser feature i...

USING CompactFlash CARDS WITH YOUR COMPUTER E-112 Image Information File size (KB)Resolution (pixels)QualityRecording modeAELight meteringShutter speedAperture stopExposure compFocusing modeFlash modeSharpnessSaturationContrastWhite balanceDigital zoomDateModel Click Index to return to the image lis...

MESSAGES E-117 MEMORY FULLChange quality ordelete unneededimages. MEMORY FULLDelete unneededimages. NO FORMAT 3. Use [ 왔 ] and [ 왖 ] to select “Yes”, and then press SET. • Select MENU if you want to abort the reformat procedure without deleting anything. • Completion of the format operation is indic...

SPECIFICATIONS E-119 SPECIFICATIONS Description ......................... Digital camera Model .................................. QV-3000EX/Ir Recorded ImageFile Format ......................... S t i l l i m a g e s ( i n c l u d i n g p a n o r a m a s ) : JPEG (Exif. Ver. 2.1), DCF standard(Desig...