Casio E-105 - Cassiopeia - Win CE 2.11 131 MHz- Manuals

— 5 — 4. Required System Configuration The minimum system configuration required for running ActiveSync ® 3.5 is described below. Microsoft ® ActiveSync ® 3.5 System Requirements Minimum Desktop Computer Requirements • Microsoft ® Windows ® XP, Microsoft ® Windows ® 2000, Microsoft ® Windows ® Mille...

— 6 — Note • Different minimum system requirements are required when using the applications included on the CASSIOPEIA Applications CD-ROM. See the documentation contained on the CD-ROM for full details. • The cradle that comes with the unit is designed for USB connection only. If your computer does...

— 10 — Connecting the Cradle to a Computer The cradle has a USB cable for connection to a computer. Connect the end of the cable to a USB port of theconnected computer. • See "Required System Configuration" on page 5 for details on the type of computer system required for use with the cradle...

— 11 — Make sure the unit lowers securely into the cradle as far as it can go. To remove the CASSIOPEIA from the cradle Pull up on the unit so the recess on its back disengages from the raised part of the cradle, and then lift the unitstraight up from the cradle. 2 2 1 1 4. Taking care to align the ...

— 12 — Using the USB Cable The USB cable to connect the unit directly to a computer. • See "Required System Configuration" on page 5 for the computer system that is required for direct USB connection. • The illustration below is just one possible connection configuration. The location and la...

— 13 — Infrared Communication The infrared port of this unit can be used to exchange data with another unit, or with another device equippedwith infrared communication capabilities. Remember that the two infrared ports must be pointed directly ateach other when performing communication. The distance...

— 14 — Using a PC Card Unit (Option) The PC Card Unit makes it possible to use PCMCIA type cards with the unit. An optionally available batterypack can also be installed on the PC Card Unit and used as an external power supply for the unit. See the userdocumentation that comes with the PC Card Unit ...

— 15 — 6. BATTERY & RESET (Quotation from E-200 Hardware Manual) 6-1. Batteries The unit is powered by a dual power supply that consists of a main battery (rechargeable battery pack) and abackup battery (CR2032 lithium battery). Main (Backup) Battery Recharge (Replace) the battery pack (backup b...

— 16 — Memory Error Message If the memory check operation that the unit performs when the reset button is pressed detects a data error, thefollowing message appears on the screen instead of the startup screen. "A problem with memory contents has been found. Press [Action] to continue with the re...

— 17 — 7. OPERATION CHECK 7-1. Preparation 1. E-200(Prepare another units to perform IrDA communication check except the checking unit.) 2. Compact Flash Memory Card (recommended more than 32MB type, at least 8MB type required) 3. SD Memory Card 4. Rechargeable Battery Pack 5. AC Adapter (AD-C54240E...

— 18 — 1 Perform full reset 2 Peform initial set up(Refer to 5-2. Initial Setup of page 8) 3 The test menu is booted automaticallyafter the CF card with the diagnosticprogram is inserted. 4 Tap "Flow" and select "Component" 5 Tapping "Start" carries out the test itemswhose bo...

— 19 — 7-4. Operation Check ■ Touch PanelTouch Panel should be checked. No. 1 2 3 4 Display Cross Test Test Items Corners Test Start Exit Exit Tap 4 corners to perform testing ! X:0Y:0 Exit Check If the four marks do notdisappear, tapping if NG. Make sure the cross disappearafter tracing.Note: Some ...

— 20 — ■ ButtonButton should be checked. No. 1 2 Operation Check if the unit correctly countsthe number of times the buttonsin the right fiture are pressed.Tapping "Reset" clears thenumber.After confirming the test, tap"Pass" or "Failed."Note: Connect remote earphoneif it is ...

— 22 — ■ Power Not used. ■ IrDAIrDA should be checked. No. 1a 2a 3a 4a 1b 2b 3b 4b Operation TEST UNIT Check the item which you wantto test and set local mode"client". Tap "Start". Tap "Stop". Tap "Exit". MASTER UNIT Check the item which you wantto test and set local ...

— 23 — ■ LEDLED should be checked. No. 1 2 3 Operation Tap "Start." Indicator lamp flashes. After confirming the test, tap"Pass" or "Failed." Display Click "Start" to flashing LED.Click "Stop" to stop flashing LED. Action Start Stop Click "PASS" if LED...

— 26 — ■ SD_DetectSD card detection should be checked. No. 1 2 3 Operation Insert SD card. Remove SD card. After the test, tap "Pass" or"Failed." Display SD Card is removed,Please INSERT SD Card now. SD Failed & Exit Auto exit after tested. PASS SD Failed & Exit Pass Auto exi...

— 33 — 10. WIRING DIAGRAM 60 Pins B2B Connector 32 Pin Connector B US Switch Buttons B US Switch Buff er f or RS232C Input Signal Intel SIR SA-1110 CPLD Xceiv er CF T ype II MediaQ 1132 LCD P anel A udio Codec Microphone Ear Phone Amplifier USB Host USB Client Ser ial Signal RS232C Buttons 12S SPI P...

— 36 — 12. DISASSEMBLY/ASSEMBLY PROCEDURE 12-1. DISASSEMBLY Disassembly the unit according to the following procedure. 1. Remove CF dummy card, Stylus pen. After sliding the battery cover switch to left and right, remove the battery covers, lithiumbattery and rechargeable battery in order. 2. By ins...

— 37 — 5. Disassemble other side cover as same as 4. 6. Remove 6 screws from the case. 7. Unhook and separate the upper and lower cases by using case opner as shown figure. 8. Separete the upper and lower case, and main PCB, LCD module and button PCB must be the upper case side. Adhesive tape atthis...

— 38 — 9. Put the upper and lower case as shown figure. And disconnect the backup battery, speaker and button PCB cable. 10. Remove main PCB and LCD module from upper case as shown figure. 11. Remove LCD module from main PCB as shown figure. 12. Disconnect FPC and LCD cable as shown figure. Disconne...

— 40 — 17. Remove 4 screws, and separete the button PCB. 18. Remove Speaker and the cover as shown figure. 12-2. ASSEMBLY Assembly the unit according to the following procedure. 1. Assemble speaker and the cover, then put them as shown figure. Be careful the position of speaker wires. Insulation sea...

— 41 — 3. Connect the FPC and cable connector. Put LCD moldule as shown arrow on the main PCB. Make sure end of LCD shieldplate must be fit at end of main PCB. 4. Connect the cables from backup battery and spaeker. The pole must be right position. 5. Check the onjectives when the upper and lower cas...

CASIO TECHNO CO.,LTD. Overseas Service Division Nishi-Shinjuku Kimuraya Bldg. 1F5-25, Nishi-Shinjuku 7-ChomeShinjuku-ku, Tokyo 160-0023, Japan Ver.1 : • "7. DATA BACKUP" has been deleted • Deletion of spare part (Item28) in PARTS LIST (page 42) and EXPLODED VIEW (page 45)