Page 2 - Table of Contents
2 Table of Contents Editorial Record 4 Preface 5 Chapter 1. Overview of the Products 6 1.1. Features 6 1.2. Available Models 8 1.2.1. Options and Interfaces 9 1.3. General Guide 10 1.3.1. DT-X11 10 1.3.2. DT-167CHGE Car Mounted Battery Charger 12 1.3.3. DT-160IOE Bridge Satellite Cradle 13 1.3.4. DT...
Page 4 - Editorial Record
4 Editorial Record Manual Version no. Date edited Page Content 0.90 February 2006 Tentative version 1.00 March 2006 Original version 8 The content in Table 1.2 of Chapter 1.2 is corrected. 1.01 August 26 The content in Table 2.9 of Chapter 2.7 is corrected.
Page 5 - Preface
5 Preface This reference manual describes about the CASIO DT-X11 series handheld terminals with C-MOS imager or Laser Scanner integrated. A new generation of handheld terminal has been developed. CASIO introduces the revolutionary DT-X11 series of handheld terminal with built-in Intel® PXA255 Applic...
Page 6 - Overview of the Products; Incorporates .NET technology; Built with Bluetooth; Support of outstanding development environment
6 1. Overview of the Products 1.1 Features Incorporates .NET technology • Uses WindowsCE 5.0 operating system. • Makes effective use of .NET resources developed by other corporations. • Employment of eMbedded OS makes it possible to build a flexible WindowsCE system. Enhanced communicating functions...
Page 8 - Models
8 1.2 Available Models Table 1.1 List of models Wireless Communication Memory Model Scan Engine Bluetooth IEE802.11b PC Card slot RAM FROM DT-X11M10E Laser Scanner Yes Yes Yes 64MB 128MB DT-X11M10RC Laser Scanner Yes No No 64MB 128MB DT-X11M30E C-MOS Imager Yes Yes Yes 64MB 128MB DT-X11M30U C-MOS Im...
Page 10 - Guide; Left
10 1.3 General Guide 1.3.1 DT-X11 Left Front Right Back 22 23 24 25 21 18 19 1 2 4 3 5 7 9 6 8 10 11 12 13 14 18 17 16 15 20 Fig. 1.2 Table 1.4 Names of parts No. Name Description Indicates the result of a bar code reading or other read operation. 1 Indicator 1 Red Green : Read error : Read successf...
Page 12 - Views
12 1.3.2 DT-167CHGE Car Mounted Battery Charger Views Power Indicator Lamp Power Contacts Remove button Car plug code jack Power Switch Fig. 1.3
Page 13 - Description
13 1.3.3 DT-160IOE Bridge Satellite Cradle The following external views show the DT-160IOE Bridge Satellite Cradle. Refer to Table 1.5 for each referenced part on the DT-160IOE. Views 1 2 4 3 5 7 6 8 10 11 9 12 13 14 Back Top Front Right Bottom Fig 1.1 Table 1.5 Names of parts No. Name Description 1...
Page 17 - Specifications
17 2. Hardware Specifications 2.1 DT-X11 Table 2.1 Item Specification Remark CPU, Memory CPU Intel ® PXA255 Application Processor Operating clock; max 400 MHz RAM 64 MB FROM 128 MB (user area; approx. 115 MB) FlashFX built in. OS Microsoft ® Windows ® CE 5.0 operating system C-MOS Imager (DT-X11M30E...
Page 19 - A font that can be used to print characters in any size.
19 Bluetooth ® Standard Bluetooth ® Specification Ver.1.2 Comm. range Approx. 3 m Depending on the surroundingconditions Output power Maximum. 3dBm ( PowerClass 2) Serial interface Standard USB Slave Mini B 5 Pin. Baud rate Full speed (12 Mbps) Audio Earphone jack φ 2.5mm 3-pole Supports headset. PC...
Page 22 - DT-167CHGE Car Mounted Battery Charger
22 2.3 DT-167CHGE Car Mounted Battery Charger Table 2.4 Item Specification Remark No. of LEDs 1 No. of display colors 2 In red and green Display content Power status (“POWER”) Indicates the status of terminal being mounted on the charger. Display Status LED OFF Flashing in green Flashing in red : Po...
Page 25 - Status Indication with LEDs
25 2.6 Status Indication with LEDs Various operational statuses on the DT-160IOE can be displayed using the LEDs. The following table describes LED modes and their meanings. Table 2.8 Item Specification Remark LED DT-X11 terminal is not mounted LED ON in red DT-X11 terminal is mounted LED ON in gree...
Page 26 - Power Supply Block
26 2.7 DT-5022CHG Dual Battery Charger Basic Block Table 2.9 Item Specification Remark Basic function Rechargeable battery pack HA-A20BAT Battery pack DT-5025LBAT Large-capacity battery pack Dedicated batteries only. AC adaptor AD-S45150AU Input 100 to 230VAC (W/US power cord) AD-S45150AE Input 100 ...
Page 27 - Battery Charge Block
27 Charge output terminal CH1 PIN1: + 4.22V±30mV PIN2: - GND Charge output terminal CH2 PIN1: + 4.22V±30mV PIN2: - GND Input terminal DC jack Rated DC16V, input voltage DC 8.0 to 20.0V Battery Charge Block Table 2.12 Item Specification Remark Charge control Output voltage DC 4.22V±30mV Charge curren...
Page 34 - Product Identification and Reference Numbers
34 4. Product Identification and Reference Numbers On the back of the DT-X11 and its options, there is a bar code and numbers printed on label as shown in Fig 4.1. This bar code is represented by 15 digits of Code128 symbology and by alphanumeric characters beneath the bar code. The numbers from 1 t...
Page 39 - Performances
39 5.2 Electrical Performances 5.2.1 DT-X11 Table 5.7 Item Specification Remark Power consumption DC2.5A/3.7 to 5.0V Anti-static strength Malfunction ± 6 KV Destruction ± 12 KV 150 pF, 330ohm 5.2.2 DT-160IOE/DT-169CHGE Table 5.8 Item Specification Remark Approx. 0.1 A When DT-X11 is not mounted on. ...
Page 46 - Length 1 meter or less
46 6. Cable Specifications 6.1 For Chain Connection and Short Length Length; 1 meter or less Fig. 6.1 Table 6.1 Specifications of the cable Cable Conductor 20/0.1A Insulator Semi-hard material P.V.C. Core wire Finish of external shape 20/0.1A Insulator P.V.C. Sheath Finish of external shape φ 4.3±0....
Page 47 - For Chain Connection and Long Length; Length 1 meter or longer; Cable compatible with SK; XXXXXXX
47 6.2 For Chain Connection and Long Length Length; 1 meter or longer Fig. 6.3 Pin layout diagram of cable for chain connection and long distance (pin-to-pin straight/twist-pair connection) Wiring Fig. 6.4 Pin no. Signal 1 ORS+ 2 ORS- 3 OSD+ 4 OSD- 5 IRD+ 6 IRD Pin no. Signal 1 IRS+ 2 IRS- 3 ISD+ 4 ...
Page 49 - Battery Pack
49 7.2 Safety 7.2.1 Battery Pack/Memory Backup Battery Battery Pack • Never disassemble or retrofit the battery pack. The battery pack has safety mechanism and protection means incorporated to avoid hazards. Should they be damaged, the battery pack could become hot, generate smoke, explode, or ignit...
Page 50 - Memory Backup Battery; Only use the battery specified for the DT-X11.
50 • The battery pack has a specific polarity. Do not force it into the DT-X11 when installing. Check the polarity. If the battery pack is connected backwards, it can be incorrectly charged and have an abnormal chemical reaction induced, causing it to become hot, smoke, explode, or ignite. • If the ...