Casio DSC9148D8G16PK9- Manuals

Page 2 - Overview; Fair bandwidth arbiters.; See; Note

2 Send documentation comments to [email protected] 1 Overview Cisco MDS 9148 Switch The Cisco MDS 9148 Multilayer Fabric Switch has 48 Fibre Channel ports with speeds of 8, 4, 2, and 1 Gbps. The Cisco MDS 9148 Switch is a top-of-rack (TOR) Fibre Channel switch based on System-on-a-Chip (SOC) technol...

Page 3 - Figure 3

3 Send documentation comments to [email protected] 2 Verifying Your Shipping Contents Verify that you have received all items, including the following: • Rack-mount kit • ESD wrist strap • Cables and connectors • Any optional items ordered 3 Installing the Switch Install the switch in one of the fol...

Page 4 - Installing the SFPs; Install one of the following SFPs in each empty port:; Powering Up the Switch; To power up the switch, follow these steps:

4 Send documentation comments to [email protected] 4 Installing the SFPs Install one of the following SFPs in each empty port: • A Fibre Channel Shortwave 1-, 2-, 4-, or 8-Gbps SFP transceiver, part number DS-SFP-FC8G-SW • A Fibre Channel Long wavelength 1-, 2-, 4-, or 8-Gbps SFP transceiver, part n...

Page 6 - Setting Up a Network; Ensure that the Mgmt0 port is connected to the management network.

6 Send documentation comments to [email protected] Figure 6 Power Receptacle and On/Off Switch on Cisco MDS 9148 Switch 274885 AC power receptacle On/Off switch 6 Setting Up a Network To set up a network, follow these steps: Step 1 Ensure that the Mgmt0 port is connected to the management network. S...

Page 7 - Caution; Example 1; Set up the default gateway.; Connecting Devices; Connect a server to the switch (see

7 Send documentation comments to [email protected] Step 3 Use the switch setup utility that appears on the console connection. Step 4 Use the switch setup utility to do the following: a. Set the admin password for the switch. Caution Make sure that you configure a strong password. Short, easy-to-dec...

Page 8 - Installing Cisco Device Manager; To install Cisco Device Manager, follow these steps:; Click the Device Manager link, shown in; Figure 9

8 Send documentation comments to [email protected] 8 Installing Cisco Device Manager To install Cisco Device Manager, follow these steps: Step 1 Enter the IP address you assigned to your switch in your Address field of you browser to begin the Cisco Device Manager installation. Step 2 Click the Devi...

Page 9 - Using the Quick Config Wizard; To enable ports and assign zone memberships, follow these steps:; Click the Device Manager icon on your desktop to log in.; Device Manager Login

9 Send documentation comments to [email protected] 9 Using the Quick Config Wizard To enable ports and assign zone memberships, follow these steps: Step 1 Click the Device Manager icon on your desktop to log in. Step 2 Enter a password in the Password field (see Figure 10 ). Step 3 Click Open (see F...

Page 10 - Confirm Changes; Click Finish to save your changes.; Repeat Steps 2 through 5 to create more zones.; Creating VSANs

10 Send documentation comments to [email protected] Figure 12 Confirm Changes Step 8 Click Finish to save your changes. Step 9 Repeat Steps 2 through 5 to create more zones. Note A maximum of 12 zones with two ports each can be created with the Quick Config Wizard. Note For more information about in...

Page 11 - Repeat Step 6 and 7 to create more VSANs.

11 Send documentation comments to [email protected] Figure 13 Device Manager Login Step 4 Click FC, and then choose VSANs. Step 5 Click Create. Step 6 Use the Create VSAN General dialog box to create a VSAN, as shown in Figure 14 . Figure 14 VSAN Creation Step 7 Click Finish to save your changes. St...