Page 3 - Table of contents; Basic Safety
Table of contents 1 Basic Safety 4 1.1 Safety precautions 4 1.2 Important safety instructions 4 1.3 Important Notices 6 1.4 FCC and UL 8 2 System overview 9 3 Quick install 10 3.1 Connections 10 3.1.1 Primary connections 12 3.1.2 Optional connections 12 3.2 Powering up 13 3.3 Login 14 3.4 Startup Wi...
Page 4 - Safety precautions
Basic Safety This safety section describes safety requirements and the format used for warnings andcautions. Safety precautions Danger!Indicates a hazardous situation which, if not avoided, will result in death or serious injury. ! Warning!Indicates a hazardous situation which, if not avoided, could...
Page 6 - Important Notices
Important Notices Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. Theunit may fall, causing serious injury and/or serious damage to the unit. Use only with thecart, stand, tripod, bracket, or table specified by the manufacturer. When a cart is used, usecaution a...
Page 8 - FCC and UL; Reorient or relocate the receiving antenna
Video loss - Video loss is inherent to digital video recording; therefore, Bosch SecuritySystems cannot be held liable for any damage that results from missing video information. Tominimize the risk of lost digital information, Bosch Security Systems recommends multiple,redundant recording systems, ...
Page 9 - System overview
System overview The Bosch Video Recorder DIVAR 3000/5000 is a multi-channel digital recorder that uses thelatest 960H high resolution technology, plus modern compression techniques. Simultaneousmonitoring, recording, archiving and playback are guided remote or local by simple menuselections and oper...
Page 10 - Quick install; Connections; Connections on back of DIVAR AN 3000
Quick install To get the unit operational, perform the following quick install steps:1. Make all the hardware connections – see Connections, page 10. 2. Power up the system – see Powering up, page 13. 3. Log in – see Login, page 14. 4. Correctly configure your system software with the Startup wizard...
Page 12 - Primary connections
Connections on back of DIVAR AN 5000 (4/8-channel) 5 6 7 8 1 2 3 4 ALARM OUT RS-485 AUDIO OUT ETHERNET C3 ALARM IN G + _ G N O3 N O1 N O2 C2 C1 AUDIO IN HDMI MON.A RS-232 VGA MON.A MIC IN 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 CVBS MON. B CVBS MON. A VIDEO OUT VIDEO IN e-SATA G + _ G +12V CTRL C5 N O5 N O4...
Page 13 - Powering up
6. Connect up to 6 ALARM OUT outputs (via the supplied terminal blocks). 7. Connect a pan/tilt/zoom control unit to the RS-485 or RS-232 port. 8. Connect to your network via the ETHERNET connector. 9. Connect extra video out cables to the VIDEO OUT ports if loop through is required toother devices (...
Page 14 - Login; The system login interface is shown in the following figure:
Login The system login interface is shown in the following figure: When you startup the system for the first time, the Startup Wizard appears where you cansetup the system software. Here the default User ID is administrator and the defaultpassword is 000000 (six zeros).Use the supplied USB mouse, fr...
Page 15 - Startup Wizard; Assign General settings – see General, page 16.; return to the previous Startup wizard screen
Startup Wizard The Startup Wizard opens automatically after you log in for the first time. See followingscreen: Select a language and video standard from the drop-down menus and click <Next step>. Thewizard will guide you through the following steps:1. Choose to reset the startup wizard to run...
Page 17 - Encode
– When ready, click <Next step> to move to the Encoder Startup wizard screen. Encode Assign here the encoder settings and click <Next step> for the next Startup wizard screen(Schedule settings). To save time when setting up channels, use <Copy> to copy settings fromone channel to o...
Page 18 - Manual: selected channels will automatically begin recording
Schedule Assign here all the schedule settings and click <Next step> for the next Startup wizard screen(Record settings). Use <Copy> to copy settings from one channel to other(s). Record Assign here all the record settings and click <Next step> for the next Startup wizard screen(Ne...
Page 19 - Network
Network Assign here all the network settings and click <Finished> to complete the Startup wizard (youwill need to confirm the setup by clicking <OK>).The system will automatically display the active view mode (with a maximum 16 cameraviews). From here you can operate your system using th...
Page 21 - First time operation; Mouse controls, page 25; Live viewing
First time operation Once the Startup Wizard steps have been completed, your monitor will show the live viewingmode with real time camera displays - see Live viewing, page 21. From here, you can control your system via menus (Quick menu and Main menu) using themouse, front panel buttons, or the remo...
Page 23 - Instant playback
Icon name Function Instant playback Press to playback the previous 5-60 minutes recorded on thecurrent channel (default is 5 minutes). The playback screensupports drag and play function - use your mouse to drag theplay bar to any playback start time (use the pause and exitfunctions as required). Dur...
Page 24 - Quick menu; Main menu – for settings and user modes – see Main menu
Quick menu When in live viewing mode, right-click the mouse for the following quick menu: Figure 4.3: Quick menu Here you can select:– View 1, 4, 9, 16 – choose here the number of view windows shown on Monitor A (one-window, four-windows, nine-windows or sixteen-windows). Press play to activate the ...
Page 25 - Mouse controls; Mouse
Mouse controls Mouse Function Left button In Live mode, click once to select channel and choose other functions In the Quick menu, use the left mouse button for the following options:– Go to the main menu (after selecting a menu item, left-click again to viewmenu content and make selections) – Modif...
Page 26 - Right button In Live mode, the following Quick menu appears:
Right button In Live mode, the following Quick menu appears: If you are currently in a menu, right-click to exit the current menu withoutsaving any modifications. 26 en | First time operation DIVAR AN 3000 / DIVAR AN 5000 2014.10 | 2.0 | AM18-Q0668 Quick Installation Guide Bosch Security Systems
Page 27 - Main menu; Right-click the mouse for the Quick menu and select ‘Main menu’
Main menu Access the Main menu as follows:– Use the Enter key and the direction buttons on the front panel or the remote control – Right-click the mouse for the Quick menu and select ‘Main menu’ Figure 4.4: Main menu Here you can select the following sub-menus:– Setting and Advanced for system confi...
Page 34 - Export
Export The Export menu is accessed from the main menu or Search/Play screen (or by pressing theExport key on the Front Panel or on the remote control). Use this menu to write segments ofrecorded video to a USB storage device or recordable DVD. Figure 4.6: Export screen 1. Choose from the Selected De...
Page 35 - Maintenance; External cleaning and inspection
Maintenance Maintenance of this unit is limited to:– External cleaning and inspection – Replace internal battery, page 39 – Install HDD in DIVAR AN 3000, page 40 – Install HDD in DIVAR AN 5000, page 43 – Install DVD in DIVAR AN 3000, page 47 – Install DVD in DIVAR AN 5000, page 49 The following figu...
Page 37 - Maintenance precautions; Attach ESD strap; Precaution – ESD; Slide the expandable strap over your wrist.; High Voltage
Maintenance precautions Attach ESD strap Precaution – ESD ! Caution!Possible processor damage.When the DIVAR cover is removed for installing, replacing or repairing internal components(battery, HDD or DVD), always make sure you wear an approved ESD wrist strap – see below. Figure 5.3: ESD strap The ...
Page 38 - Connector/processor damage; Press pin
Connector/processor damage ! Caution!Possible connector damage.Notice also that some cables for both the DIVAR AN 3000 and DIVAR AN 5000 have a lockwhich must be pressed and held when inserting/removing the cable. See following figures. Press pin Hold pin and connect cable Press pin Hold pin and con...
Page 39 - Attach ESD strap, page 37; Replace internal battery; Danger of explosion if battery is incorrectly replaced.
See also– Attach ESD strap, page 37 Replace internal battery This product uses a 3.0 V Lithium CR2032 battery (article number F01U099057) as the backuppower supply for internal system status (e.g. real time clock).Under normal circumstances this battery will last for a minimum of 5 years. Low batter...
Page 40 - Install HDD in DIVAR AN 3000; Note: A maximum 2 HDDs can be installed in the DIVAR AN 3000
Install HDD in DIVAR AN 3000 See the following components for installing HDD (brackets, rubbers, screws, tie wrap andcables included in package; HDD not included): Figure 5.4: HDD install components for DIVAR AN 3000 Note: A maximum 2 HDDs can be installed in the DIVAR AN 3000 5.3 40 en | Maintenanc...
Page 41 - Install HDD 1
Install HDD 1 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) 4x 4x 4x 4x 4x 5.3.1 DIVAR AN 3000 / DIVAR AN 5000 Maintenance | en 41 Bosch Security Systems Quick Installation Guide 2014.10 | 2.0 | AM18-Q0668
Page 42 - Install HDD 2
Install HDD 2 Install HDD 2 in the position of the optional DVD – see following figure: Figure 5.5: Install HDD 2 Use the same install steps described for installing HDD 1. 5.3.2 42 en | Maintenance DIVAR AN 3000 / DIVAR AN 5000 2014.10 | 2.0 | AM18-Q0668 Quick Installation Guide Bosch Security Syst...
Page 43 - Install HDD in DIVAR AN 5000
Install HDD in DIVAR AN 5000 See the following components for installing HDD (brackets, rubbers, screws, tie wrap andcables included in package; HDD not included): Figure 5.6: HDD install components for DIVAR AN 5000 Note: A maximum 4 HDDs can be installed in the DIVAR AN 5000 5.4 DIVAR AN 3000 / DI...
Page 46 - Install HDD 3 and 4
Install HDD 3 and 4 Use the same install steps as for HDD 1 and 2, but install HDD 3 and 4 at the optional DVDlocation. See following figure. 5.4.3 46 en | Maintenance DIVAR AN 3000 / DIVAR AN 5000 2014.10 | 2.0 | AM18-Q0668 Quick Installation Guide Bosch Security Systems
Page 47 - Install DVD in DIVAR AN 3000
Install DVD in DIVAR AN 3000 See the following components and steps required for this installation (screws included inpackage): Figure 5.7: DVD install components for DIVAR AN 3000 5.5 DIVAR AN 3000 / DIVAR AN 5000 Maintenance | en 47 Bosch Security Systems Quick Installation Guide 2014.10 | 2.0 | A...
Page 49 - Install DVD in DIVAR AN 5000
Install DVD in DIVAR AN 5000 See the following components and steps required for this installation (spacers and screwsincluded in package): Figure 5.9: DVD install components for DIVAR AN 5000 5.6 DIVAR AN 3000 / DIVAR AN 5000 Maintenance | en 49 Bosch Security Systems Quick Installation Guide 2014....