Casio CDP-135- Manuals

Page 3 - MIDI Implementation Notation

V MIDI Implementation Notation 20 19 Value Notation 20 19.1 Hexadecimal Notation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 19.2 Binary Notation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 3

Page 4 - Part I; MIDI Message Overview; Product Configuration as a MIDI Device; Performance Controller Section; Sound Generator Section

Part I MIDI Message Overview 1 Product Configuration as a MIDI Device As a MIDI device, this Instrument consists of the Performance Controller Section, and Sound GeneratorSection described below. Each of these sections can send and receive specific MIDI Messages in accordancewith its function. 1.1 P...

Page 5 - Conditions that Disable Message Send and Receive

Number Name Channel Assigned Function 00 A01 01 Keyboard (Main) 01 A02 02 Keyboard (Layer) 02 A03 03 - 03 A04 04 - 04 A05 05 - 05 A06 06 - 06 A07 07 - 07 A08 08 Metronome 08 A09 09 - 09 A10 10 - 10 A11 11 - 11 A12 12 - 12 A13 13 - 13 A14 14 - 14 A15 15 - 15 A16 16 - 16 B01 01 MIDI/Auto Performance F...

Page 6 - Channel Message

Part II Channel Message 3 Receive Channel The channel number of the channel message received by each part is shown in the table under “1.2.2Instrument Part Block”. 4 Send Channel Basically, the MIDI channel of the channel message sent when the Instrument is played coincides withthe MIDI channel of t...

Page 7 - Control Change

Send This message is not sent by this Instrument. Receive This message is not received by this Instrument. 8 Control Change Message Format: BnH ccH vvH n: MIDI Channel Number cc: Control Number vv: Value Send Sent when the Instrument’s pedal is operated or when Instrument settings are changed. Recei...

Page 11 - Mode Message

8.13.2 Fine Tune Message Format: BnH 64H 01H BnH 65H 00H BnH 06H mmH BnH 26H llH n: MIDI Channel Number mm: MSB Value ll: LSB Value Send This message is not sent by this Instrument. Receive Receipt changes the fine tune of the corresponding part. 8.13.3 Coarse Tune Message Format: BnH 64H 02H BnH 65...

Page 13 - Program Change; Channel After Touch; Pitch Bend

9.7 Poly (7FH) Message Format: BnH 7FH 00H n: MIDI Channel Number Send This message is not sent by this Instrument. Receive Receipt performs the same operation as when All Notes Oﬀ is received. 10 Program Change Message Format: CnH ppH n: MIDI Channel Number pp: Program Number (Note1) Note1 : For de...

Page 14 - System Message

Part III System Message 13 Timing Clock Message Format: F8H Send Sent when demo song is played. Receive This message is not received by this Instrument. 14 Start Message Format: FAH Send Sent when demo song is played. Receive This message is not received by this Instrument. 15 Stop Message Format: F...

Page 15 - Universal Real Time System Exclusive Message

17.1 Universal Real Time System Exclusive Message Message Format: F0H 7FH....F7H 17.1.1 Master Volume Message Format: F0H 7FH 7FH 04H 01H llH mmH F7H ll: LSB Value(Send:00H, Receive:Ignored) mm: MSB Value Send This message is not sent by this Instrument. Receive Receipt changes the Master Volume. 17...

Page 18 - Part IV; Setting Values and Send/ Receive Values; Setting Value Tables; Off/On Setting Value Table

Part IV Setting Values and Send/ Receive Values 18 Setting Value Tables 18.1 Oﬀ/On Setting Value Table Transmit Value Receive Value Parameter 00H 00H - 3FH Off 7FH 40H - 7FH On 18.2 –64 - 0 - +63 Setting Value Table Transmit Value Receive Value Parameter 00H 00H -64 : : : 40H 40H 0 : : : 7FH 7FH +63...

Page 20 - Part V; Hexadecimal Notation; Binary Notation

Part V MIDI Implementation Notation 19 Value Notation 19.1 Hexadecimal Notation MIDI implementation sometimes requires that data be expressed in hexadecimal format. Hexadecimalvalues are indicated by the letter “H” after the value. The hexadecimal equivalents of decimal values 10through 15 are expre...