Casablanca PSG73M - Manuals

Page 2 - SAFE USE; Unpacking; INTRODUCTION; • Never install a fan over a pool or spa.; BEFORE YOU START

2 Circuit Breaker (Trip breaker for the circuit you will be working on) Fuse Box (Remove fuse for the circuit you will be working on) 18" ↑↑↑↑↑ 84" ↑↑↑↑↑ 70" ↑↑↑↑↑ SAFE USE • CAUTION: RISK OF ELECTRICAL SHOCK! All wiring must be performed in accordance with national and localelectrical c...

Page 3 - MOUNTING RECOMMENDATIONS; Location; • Do not locate the fan in a doorway or above a swinging door.; Fan Size; GENERAL GUIDELINES; Calculation of Ceiling Angle; Ceiling Angle Template; When to Use Extension Poles; Fan may wobble or vibrate if pole length is not; SLOPED CEILING INSTALLATIONS

3 S S S S S IE IE IE IE IENA NA NA NA NA ™ ™ ™ ™ ™ MOUNTING RECOMMENDATIONS Before mounting your Casablanca fan, read the following helpful recommendations. The location of the fan, air circulation,and fan size are all important factors to consider before installation. Location Ceiling fans have pra...

Page 4 - FAN INSTALLATION; Support directly to building structure only.; GETTING STARTED; Installing a New Ceiling Fixture Outlet Box; CROSSBAR MOUNTING BRACKET INSTALLATION

4 FAN INSTALLATION CEILING HARDWARE (not to scale) WARNING! Support directly to building structure only. WARNING! To reduce the risk of fire, electrical shock, orpersonal injur y, mount to outlet box marked“Acceptable for Ceiling Fan Support ” using themounting hardware provided with the outlet box....

Page 5 - This step is required only under two conditions:

5 S S S S S IE IE IE IE IENA NA NA NA NA ™ ™ ™ ™ ™ LAG SCREW INSTALLATION CANOPY INSTALLATION NOTE: This step is required only under two conditions: If the fan weighs 36 lbs. or more or if the existing ceilingfixture outlet box needs to be modified for a ceiling fana p p l i c a t i o n ( f o r e x ...

Page 6 - FAN PREPARATION; S tep 4g

6 FAN PREPARATION PERMA•LOCK™ HARDWARE (not to scale) Prepare for fan installation as follows:Step 4a. Remove the caution shield f rom the motor. Step 4b. Using the provided Allen wrench (attached to the paper motor warning shield), loosen the Allen set screwattached to the motor coupling. Step 4c. ...

Page 7 - Installation/Replacement of Incandescent Lightbulbs; BLADE INSTALLATION; NO LIGHT CAP OPTION

7 S S S S S IE IE IE IE IENA NA NA NA NA ™ ™ ™ ™ ™ Installation/Replacement of Incandescent Lightbulbs Step 5. Remove the two screws f rom the cover door as shown and lift door f rom motor. Install a 40-watt S-11type incandescent lightbulb in the socket. Replace the doorand re-insert the screws. Rep...

Page 9 - LIGHT KIT INSTALLATION; Light Assembly Installation

9 S S S S S IE IE IE IE IENA NA NA NA NA ™ ™ ™ ™ ™ LIGHT KIT INSTALLATION Light Assembly Installation Step 11a. Connect the light assembly connector to the motor connector, as shown. Step 11b. Carefully tuck the wires and align the light assembly with the adapter plate. Step 11c. Screw the finial ro...

Page 10 - Standard Light Switch

10 Screw 6-32 X 1" (2) Screw 6-32 X 3 / 8 " (2) Wood Screw 1" (2) Drywall Anchor 6-32 (2) 12v Battery W-73 Control W-73 Control Holder VERSA•TOUCH2™ CONTROL INSTALLATION CONTROL BRACKET INSTALLATION Standard Light Switch Step A. Remove the two screws holding the switch cover plate. Do no...

Page 12 - TROUBLESHOOTING TIPS

12 Please refer to this troubleshooting guide before requesting service or contacting your dealer for assistance. TROUBLESHOOTING TIPS PROBLEM POSSIBLE REMEDIES Fan will not start • Check the main circuit fuses, circuit breakers, and wall switch position. Check all wire connections. Make sure the po...

Page 13 - Fan Finishes; Blades; never use abrasive cleaning agents; No Need for Lubrication; Never lubricate this fan!; Changing Lightbulbs; CARE RECOMMENDATIONS

13 S S S S S IE IE IE IE IENA NA NA NA NA ™ ™ ™ ™ ™ Fan Finishes • For cleaning, a soft brush or lint-f ree cloth should be used to prevent scratching the finish.• A vacuum cleaner brush nozzle can remove heavier dust.• Surface smudges or an accumulation of dirt and dust can be removed easily using ...

Page 14 - AUTHORIZED SERVICE CENTERS

14 STATE/CITY ZIP SERVICE CENTER NAME PHONE TYPE ALABAMAMOBILE 36618 AZALEA CITY SERVICE CENTER 251-341-0663 TUSCALOOSA 35405 LTG. & APPL./LIGHTING PLUS 205-345-8900 HUNTSVILLE 35816 SOUTHERN HOME & HEARTH INC. 256-534-1715 ALASKAANCHORAGE 99518 PRIMARY ELECTRIC INC. 907-563-7988 ARIZONATUCS...

Page 16 - PRODUCT SPECIFICATIONS; Cosmopolitan

16 PRODUCT SPECIFICATIONS Collection: Cosmopolitan Model Name: Siena® Model Number: P5G73M Dimensions: A = 11"B = 23"C = 3"D = 18"E = 5.6" Weight: 38 lbs. Finishes: Oil-Rubbed Bronze Motor: 188 x 25mm Direct Drive TM Blade Span: 54" Blade Iron Pitch: 15° No. of Blades: 5 Tech...