Casablanca C28GXXM - Manuals

Page 2 - MOUNTING RECOMMENDATIONS; Fan Size; SLOPED CEILING INSTALLATIONS; When to Use Extension Poles

2 MOUNTING RECOMMENDATIONS Before mounting your Casablanca fan, read the following helpful recommendations. The location of the fan, air circulation, and fan size are all important factors to consider before installation.Location Ceiling fans have practical uses in almost every room in your home. We...

Page 3 - IMPORTANT SAFETY INFORMATION!; BEFORE STARTING THE INSTALLATION OF YOUR CEILING; PERMA•LOCKTM HARDWARE

3 S tar ™ / S tarlet ™ INSTALLATION INSTRUCTIONS Unpacking: Before assembling and installing your ceiling fan, remove all parts from the shipping cartons and check them against the parts listed here. Before discarding packaging material, be certain that all parts have been removed. FAN PREPARATION P...

Page 6 - BLADE HARDWARE; Assemble the blades; BLADE INSTALLATION

6 BLADE HARDWARE Step 3. Assemble the blades to the motor using the blade screws, rubber washers and metal washers. Hand tighten firmly. BLADE SCREW (4 PER BLADE) RUBBER WASHER (4 PER BLADE) BLADE SCREW BLADE INSTALLATION BLADE (3) METAL WASHER (4 PER BLADE) BLADE SCREW & WASHERS RUBBER WASHER M...

Page 7 - Wiring Connections; CANOPY HATCH INSTALLATION

7 S tar ™ / S tarlet ™ Step 4. To hang the fan body in the canopy, hold the fan body firmly and insert the ball into the canopy opening. Check that no wires were pinched. Rotate the fan body until the slot in the nylon ball fits into the pin opposite the canopy opening. HANGING THE FAN PIN SLOT BALL...

Page 8 - ATTACHING THE LIGHT FIXTURE

8 LIGHT ADAPTER SCREWS LIGHT ADAPTER PLATE LIGHT FIXTURE Step 9a. Before getting started, remove the rubberband from the plug connector. Step 9b. Install two of the three light adapter screws into the light adapter plate. Thread the plug connec- tor through the hole in the center of the light adapte...

Page 10 - Standard Light Switch; device. Use only the control provided with this fan.

10 Screw 6-32 X 1" (2) Screw 6-32 X 3 / 8 " (2) Wood Screw 1" (2) Drywall Anchor 6-32 (2) 12v Battery W-72 Control W-72 Control Holder VERSA•TOUCH2™ CONTROL INSTALLATION CONTROL BRACKET INSTALLATION Standard Light Switch Step A. Remove the two screws holding the switch cover plate. Do no...

Page 11 - CHANGING TRANSMITTER FREQUENCY SETTING; Note: You may want to label your controls to assure; REMOTE OPERATION; back on, for the previously installed Versa•Touch2

11 Send Signal LED Fan Control To start the fan. Press the selected speed button to run the fan at the desired speed. LOW=Low speed MED=Medium speed HIGH=High speed To turn off the fan, press the FAN OFF button.Airflow Direction To reverse the airflow, press the REVERSE button. REVERSE operates at a...

Page 12 - TROUBLESHOOTING TIPS

12 Please refer to this troubleshooting guide before requesting service or contacting your dealer for assistance. TROUBLESHOOTING TIPS PROBLEM POSSIBLE REMEDIES Fan will not start • Check the main circuit fuses, circuit breakers, and wall switch position. Check all wire connections. Make sure the po...

Page 13 - PRODUCT SPECIFICATIONS

13 S tar ™ / S tarlet ™ PRODUCT SPECIFICATIONS Model Name: Star™ Model Number: C28GXXM Dimensions: A = 11.8" B = 14.35" C = 3" D = 8.09" E = 7.7" Weight: 27 lbs. Model Name: Starlet™ Model Number: C29GXXM Dimensions: A = 11.7" B = 14.35" C = 3" D = 8.09" E = 7.7&#...