Casablanca 84GxxD - Manuals

Page 2 - SLOPED CEILING INSTALLATIONS

2 Calculation of 32 ° Use the tear-off Ceiling Angle Template card inserted in the back of this manual, it provides you with a simple ‘go’ or‘no-go’ for installing your fan on a sloped ceiling. SLOPED CEILING INSTALLATIONS MOUNTING RECOMMENDATIONS 7 ′ MINIMUM Pole Length StandardStandard 6" 12&#...

Page 3 - PREPARATION INSTRUCTIONS; FOUR SEASONS; FAN PREPARATION; IMPORTANT SAFETY INFORMATION!

3 PREPARATION INSTRUCTIONS FOUR SEASONS ™ III Unpacking: Before assembling and installing your ceiling fan, remove all parts from the shipping cartons and check them against the parts listed here. Before discarding packaging material, be certain that all parts have been removed. FAN PREPARATION PERM...

Page 4 - FOR FAN INSTALLATION OUTSIDE THE; CANOPY HARDWARE

4 CAUTION: To reduce the risk of personal injury, use only the mounting hardware provided with the approved outlet box to install the crossbar mounting bracket. CROSSBAR MOUNTING BRACKET INSTALLATION CEILING WIRING CROSSBAR MOUNTING BRACKET FLAT WASHER GREEN GROUND WIRE CEILING FAN APPROVED WIRING B...

Page 6 - HANGING THE FAN; PULL CHAIN OR; CANOPY HATCH INSTALLATION; CROSSBAR MOUNTING BRACKET INSTALLATION

6 Step 7. To hang the fan body in the canopy, hold the fan body firmly and insert the ballinto the canopy opening. Check that no wireswere pinched. Rotate the fan body until theslot in the nylon ball fits into the pin oppositethe canopy opening. HANGING THE FAN CAPPED BLUE D1-OPTION WIRE ON 3-SPEED ...

Page 7 - FOUR SEASONS® III; blade & blade holder hardware

7 FOUR SEASONS® III blade & blade holder hardware FIber FlaT waSher FIber FlaT waSher PaGe 14.

Page 8 - lIghT FIxTure InSTallaTIon

8 lIghT FIxTure InSTallaTIon LIGHT FIXTURE HaRdwaRE (not to scale) 9-PIn ConneCTor lIghT KIT FITTer lIghT KIT FITTer (1) SCrewS 60-waTT Candelabra bulbS (2) PullChaIn exTenderS (2) bowl bowl (1) CaP CaP (1) FInIal FInIal (1) Step 13. Remove light kit fitter from carton. Using the provided Phillips s...

Page 10 - FAN INSTALLATION OUTSIDE THE USA - EXCLUDING MODELS ENDING IN ‘E’; - MOUNTING SECONDARY SUPPORT PARTS TO OUTLET BOX; OUTSIDE USA; - SECONDARY SUPPORT INSTALLATION PARTS; FOUR SEASONSTM III

10 1WARNING: MOUNT ONLY TO AN OUTLET BOX MARKED ACCEPTABLE FOR FAN SUPPORT •••• ADVERTISSEMENT: ASSEMBLER UNIQUEMENT À UNE BÔITE DE SORTIE JUGÉE ACCEPTABLE POUR RETENIR UN VENTILATEUR. 1 2 " HOLE FENDER WASHER 1 4 " GUIDE HOLE LAG SCREW Before beginning Step 1, follow Steps A-C on Page 3. St...

Page 11 - - SECONDARY SUPPORT

11 SWITCH HOUSING PLATE SWITCH HOUSING CONNECTOR (SOCKET) MOTOR CONNECTOR (PLUG) SWITCH HOUSING SECONDARY SUPPORT CABLE NYLON STOP OUTSIDE USA - SECONDARY SUPPORT ♦ PREPARING THE SWITCH HOUSING Step 5. Hold the switch housing close to the fan and connect the motor plug to the switch housingsocket. T...

Page 14 - W-4 WALL CONTROL OF THE FAN

1 4 3-SPEED ♦ W-8 WALL CONTROL OF THE FAN & LIGHT(S) 3-SPEED ♦ W-4 WALL CONTROL OF THE FAN R • The fan may be turned ON and OFF by the W-8 wall control. • The lights may be turned ON and OFF by the W-8 and the intensityadjusted from low to high. • The fan must be supplied with two i nde p e nde ...

Page 15 - OPERATION; OPTIONAL WALL CONTROL; SAVING MONEY WITH YOUR CEILING FAN

1 5 LIGHT PULL CHAIN SWITCH REVERSE SWITCH 3-SPEED ♦ OPERATION Pull-chain switches on the fan control the fan and lights.Using the fan control pull-chain switch: Fan off at start. • First pull: fan ON, high speed • Second pull: medium speed • Third pull: low speed • Fourth pull: fan OFF Using the op...

Page 16 - TROUBLESHOOTING; PROBLEM

1 6 For questions or to locate the nearest Casablanca Authorized Service Center call toll free: 1-888-227-2178 or visit us on the web at: www.CasablancaFanCo.com TROUBLESHOOTING BEFORE REQUESTING SERVICE: Please follow this troubleshooting guide before contacting your dealer for assistance. Caring f...

Page 17 - Product SPecificationS

17 FOUR SEASONS® III Product SPecificationS Model name: Four Seasons III ® Gallery Model number: 84GxxD dimensions: A = 13" B = 25" C = 3" D = 11.5" E = 5.6" Weight: 17 lbs. Motor: 172mm x 12mm Direct Drive ™ Blade Span With: 52" Blade Pitch: 13° no. of Blades: 5 technology: ...